10.03.2015 Views

specs

specs

specs

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

dates in accordance with the General Contractor's schedule.<br />

E. On union projects, the contractor is to be responsible for employing the proper tradesmen per union<br />

jurisdiction, past, present, and future. The subcontractor is also responsible for taking whatever<br />

measures that may be necessary, including composite crews, to settle any labor disputes and insure<br />

job continuity at no additional cost to the Owner. Should questions of union jurisdiction arise, the<br />

contractor shall immediately take steps to settle such disputes and will use such labor as may be<br />

determined to have jurisdiction, at no additional cost to the Owner or General Contractor. Should he<br />

fail to take expeditious action, he will be responsible for the time lost and monetary damages<br />

because of delays arising from such disputes.<br />

F. Provide one HVAC and one plumbing technicians for 24 hours (exact schedule to be<br />

determined by the Owner’s project managers) at the time of the theatre opening.<br />

G. Assist the Mechanical Commissioning agent as per Section 15995.<br />

1.08 COORDINATION OF WORK<br />

A. The Contractor shall coordinate work of this Division with that of other Divisions so that all systems,<br />

equipment and other components of the building will be installed at the proper time, will fit the<br />

available space, and will allow proper service access to those items requiring maintenance. This<br />

means adequate access to all equipment, not just that installed under this Division.<br />

B. Any components of the Mechanical Systems which are installed without regard to the above shall be<br />

removed and relocated as directed by the architect, at no additional cost to the Owner.<br />

C. Where various items of equipment and materials are specified and scheduled, the purpose is to<br />

define the general type and quality level, not to set forth the exact trim required to fit the various types<br />

of ceiling, wall or floor finishes. The Contractor shall provide materials which will fit (both<br />

dimensionally and color) properly the types of finishes actually installed.<br />

D. In the event of conflict with other trades or work, the following priority shall be followed: lighting,<br />

HVAC, plumbing, sprinklers. The HVAC, plumbing, and sprinkler contractors shall provide what ever<br />

materials, offsets, labor etc. required to provide the required coordination and the priorities listed<br />

above.<br />

E. Where the word verify is used on the documents, the contractor shall field verify the existing<br />

conditions and modify the scope of the installation as required to meet the verified conditions without<br />

additional cost to the Owner..<br />

PART 2 - PRODUCTS<br />

2.01 STANDARD PRODUCTS<br />

A. Each item of equipment furnished under this specification shall be essentially the standard product of<br />

the manufacturer. Where two or more units of the same kind or type of equipment are required, these<br />

shall be the products of a single manufacturer. All equipment shall be U.L. approved (labeled) and<br />

shall be manufactured in the U.S.A.<br />

B. All material and equipment shall be new, and of the best quality used in good commercial practice<br />

and shall be the product of a reputable manufacturer. Each major component shall bear a name plate<br />

giving the name and address of the manufacturer and the catalogue number of designation.<br />

2.02 MANUFACTURER'S DIRECTIONS<br />

A. All manufactured articles, materials and equipment shall be applied, installed, connected, erected,<br />

used, cleaned and conditioned as directed by the manufacturers, unless herein specified to the<br />

contrary.<br />

2.03 SUBSTITUTION OF MATERIALS AND EQUIPMENT<br />

A. In general, no substitutions will be allowed. The Contractor shall submit with each request for<br />

approval of substitute material or equipment, sufficient data to show conclusively that it is equivalent<br />

to that specified. Acceptance or rejections of the substitutions when permitted shall be subject to the<br />

approval of the Engineer. Under no circumstances will the Engineer be required to prove that an<br />

item proposed for substitution is equal to the specified items. It is mandatory that the Contractor<br />

Cinemark 15000 - 4 Mechanical General Conditions<br />

South Napa Century Center XD 12 EnviroDesign, Inc., Bid Issue 7-7-11

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!