specs

Section 13600
Page 2
ASTM E1362- Standard Test Method for Calibration of Non-Concentrator
Photovoltaic Secondary Reference Cells
c. Energy Performance:
ASTM E948- Standard Test Method for Electrical Performance of Photovoltaic Cells
Using Reference Cells Under Simulated Sunlight
ASTM E1021- Standard Test Methods for Measuring Spectral Response of
Photovoltaic Cells
ASTM E1040- Standard Specification for Physical Characteristics of Nonconcentrator
Terrestrial Photovoltaic Reference Cells
ASTM E1462- Standard Test Methods for Insulation Integrity and Ground Path
Continuity of Photovoltaic Modules
2. Solar Water Heating collectors: Submit OG 100 rating by Solar Rating and Certification
Corporation for collector performance characteristics, and for rated systems submit OG 300
rating.
PART 2
PRODUCTS
2.1 EQUIPMENT
PART 3 - EXECUTION
3.1 SITE ENVIRONMENTAL PROCEDURES
A. Resource Management:
1. Energy Efficiency: Verify equipment is properly installed, connected, and adjusted. Verify
that equipment is operating as specified.
2. Renewable Energy: Verify proper operation in all modes of system operation by testing.
Verify proper operation under a wide range of conditions to verify energy delivery as
calculated for those conditions.
a. Solar Energy Systems: Comply with ASTM E1799- Standard Practice for Visual
Inspections of Photovoltaic Modules.
END OF SECTION
NAPA CENTURY CENTER XD 12
#165582