specs

PART 1 - GENERAL
SECTION 12484
FOOT GRID ENTRANCE SYSTEMS
1.01 SUMMARY
A. Section includes: Entrance matting systems, including recessed aluminum foot grids.
B. Work, items and requirements specified elsewhere that apply and/or relate to this Section include:
1. Structural Concrete - Section 03300
2. Metal Doors and Frames – Section 08100
3. Plastic Faced and Flush Wood Doors – Section 08212
4. Finish Hardware and Hardware Schedule – Section 08710
1.02 REFERENCES
A. Standards listed by reference, including revisions by issuing authority, form a part of this specification
section to extent indicated. The Standards listed here are identified with a designation number, title or
other designation established by the issuing authority.
1.03 SYSTEM DESCRIPTION
A. Performance Requirements: Provide recessed aluminum entrance floor mat system, which has been
manufactured and installed to maintain performance criteria stated by manufacturer without defects,
damage or failure.
1.04 SUBMITTALS
A. Before ordering material, submit for the Architect's approval complete manufacturer's specifications of
materials specified in this Section in accordance with Section 01340 - Submittals.
B. Product data: Submit product data, including manufacturer’s specification sheet and installation
instructions for specified products. Include methods of installation and substrate preparation for each
type of substrate.
1. Recycled Content:
a. Indicate recycled content; indicate percentage of pre-consumer and post-consumer recycled
content per unit of product.
b. Indicate material cost of product less labor included in project.
c. If recycled content product is part of an assembly, indicate the percentage of recycled content
product in the assembly by weight.
2. Local/Regional Materials:
a. Sourcing location(s): Indicate location of extraction, harvesting, and recovery; indicate
distance between extraction, harvesting, and recovery and the project site.
b. Manufacturing location(s): Indicate location of manufacturing facility; indicate distance
between manufacturing facility and the project site.
c. Product Value: Indicate dollar value of product containing local/regional materials; include
materials cost only.
d. Product Component(s) Value: Where product components are sourced or manufactured in
separate locations, provide location information for each component. Indicate the percentage
by weight of each component per unit of product.
C. Shop Drawings: Submit shop drawings showing layout, profiles and product components, including
anchorage, accessories, finish colors, patterns and textures.
D. Samples: Submit samples for each type and color of exposed entrance mat, frames and accessories
required. Provide sample of mat materials.
E. Quality Assurance Submittals: (1) certified test reports showing compliance with specified performance
characteristics and physical properties, and (2) Manufacturer’s Installation Instructions.
F. Closeout Submittals: Cleaning & maintenance Data (Include methods for maintaining installed products
and precautions against cleaning materials and methods detrimental to finishes and performance), and
Warranty
NAPA CENTURY CENTER XD 12
#165582