specs

PART 1 - GENERAL
1.01 SCOPE
A. Provide Wall Covering Work as indicated by the Contract Documents.
B. Work, items and requirements specified elsewhere that apply and/or relate to this Section include:
1. Gypsum Wallboard - Section 09250
2. Tile - Section 09310
3. Painting - Section 09900
4. Prefinished Panels - Section 09985
5. Corner Guards - Section 10260
1.02 STANDARDS
A. Meet requirements and recommendations of applicable portions of the Standards listed.
1. American Society for Testing and Materials ASTM
2. Painting and Decorating Contractors of America PDCA
3. National Fire Protection Association NPPA
NAPA CENTURY CENTER XD 12
#165582
SECTION 09950
WALL COVERING
1.03 SUBMITTALS
A. NO SUBSTITUTIONS
B. Provide 12"x12" samples to the Architect.
C. Provide Architect with electronic copies of maintenance instructions for each wall covering.
D. Instructions to contain manufacturer's recommended cleaning and application methods, including precautions
in use of cleaning materials which may be detrimental to surfaces if improperly applied.
D. Recycled Content:
1. Indicate recycled content; indicate percentage of pre-consumer and post-consumer recycled content per
unit of product.
2. Indicate material cost of product less labor included in project.
3. If recycled content product is part of an assembly, indicate the percentage of recycled content product in
the assembly by weight.
E. VOC emissions: Provide product data indicating VOC emissions in grams/liter (g/L).
4. Adhesives and sealants: Comply with California’s South Coast Air Quality Management District
(SCAQMD) #1168 identified in Section 01352.
1.04 DELIVERY AND STORAGE
A. Wallcoverings require a minimum four weeks lead-time.
B. Schedule deliveries to avoid any delay in the work.
C. Store wall covering in clean and dry area where temperatures are maintained at minimum 45 F with normal
humidity. Do not store in upright position.
1.05 ENVIRONMENTAL CONDITIONS
A. Maintain surfaces and materials at minimum 60°F three days before and during application period.
B. Provide adequate and continuous ventilation during work and after installation of wall covering.
C. Wallcoverings must be hung under sufficiently bright light. If existing lighting is not sufficient, installerwiall
supply supplementary lighting.
1.06 GUARANTEE
A. The Contractor shall guarantee that work executed under this Section will be free from defective materials
and/or workmanship for a period of one year from the date of Substantial Completion.
B. The Contractor further agrees that he will, at no expense to the Owner, repair and replace such defective work
and other work damaged thereby, which becomes defective during the guarantee period.
1.07 MANUFACTURER'S REPRESENTATIVES
A. Refer to drawings.
PART 2 - PRODUCTS
2.01 MATERIALS
A. Provide wallcovering types as shown in the finish schedule at locations described in the Drawings: