specs

Section 05810
Page 4
3.7 SCHEDULE
A. Acceptable Manufacturer: Construction Specialties.
B. Provide fire rated devices where required to maintain fire rating of assembly through which device is
penetrating.
C. Provide widths as indicated on Drawings.
1. Floor:
a. SJ-400HD; Mill aluminum finish. Location floor to floor.
b. SJW-400HD; Mill aluminum finish. Location floor to wall.
2. Wall Interior Private:
a. SFW-400 ; Mill aluminum finish. Location wall to wall.
b. SCW-400 ; Mill aluminum finish. Location wall corner.
c. Provide reflex fire barrier at rated walls.
3. Wall Interior Public:
a. SFW-400; #543 Medium bronze finish. Location wall to wall.
b. SCW-400; #543 Medium bronze finish. Location wall corner.
c. Provide reflex fire barrier at rated walls.
4. Exterior Wall: Compression seal with backer rod and sealant.
a. SC-400 (non-fire rated); black finish.
b. SF-100.
5. Ceiling:
a. FCF-400; White Gasket Finish. Location ceiling to ceiling.
b. FCFC-400; White Gasket Finish. Location ceiling to wall.
c. FWF-500.
END OF SECTION
NAPA CENTURY CENTER XD 12
#165582