specs

Section 05520
Page 1
SECTION 05520
METAL FABRICATIONS
PART 1 - GENERAL
1.1 GENERAL REQUIREMENTS
A. Requirements of Division 1 apply to all Work of this Section.
1.2 SCOPE
A. Shop fabricated metal items and miscellaneous metal work.
B. Refer to Schedule at end of this Section.
1.3 RELATED WORK (See also Table of Contents)
A. Structural Steel: Section 05100.
1.4 QUALITY ASSURANCE
A. Standards and References: (Latest Edition unless otherwise noted)
1. 2007 California Building Code (CBC), with State of California Amendments
2. American Society for Testing and Materials (ASTM) Specifications as listed in the Section.
B. Submittals: (Submit under provisions of Section 01340)
1. Shop Drawings: Submit shop drawings indicating profiles, sizes, connection attachments,
reinforcing, anchorage, size and type of fasteners, and accessories. Include erection drawings,
elevation, and details where applicable. Indicate welded connections using standard AWS welding
symbols. Indicate net weld lengths.
2. Manufacturer's descriptive data: Submit for manufacturer's items.
3. Product data. Unless otherwise indicated, submit the following for each type of product provided
under work of this Section:
1. Recycled Content:
a. Indicate recycled content; indicate percentage of pre-consumer and post-consumer
recycled content per unit of product.
b. Indicate relative dollar value of recycled content product to total dollar value of product
included in project.
c. If recycled content product is part of an assembly, indicate the percentage of recycled
content product in the assembly by weight.
d. If recycled content product is part of an assembly, indicate relative dollar value of
recycled content product to total dollar value of assembly.
3. Local/Regional Materials:
a. Sourcing location(s): Indicate location of extraction, harvesting, and recovery; indicate
distance between extraction, harvesting, and recovery and the project site.
b. Manufacturing location(s): Indicate location of manufacturing facility; indicate distance
between manufacturing facility and the project site.
c. Product Value: Indicate dollar value of product containing local/regional materials;
include materials cost only.
d. Product Component(s) Value: Where product components are sourced or manufactured
in separate locations, provide location information for each component. Indicate the
percentage by weight of each component per unit of product.
1.5 DELIVERY, STORAGE AND HANDLING
A. Deliver all parts ready for erection; store in close proximity to final locations.
NAPA CENTURY CENTER XD 12
#165582