specs

Section 05500
Page 3
B. Apply one shop coat to ferrous metals after fabrication except metals that will be encased in concrete, and
except surfaces that will be adjacent to field welds. Use asphalt paint on metals anchored into masonry, and
concrete.
C. Apply two shop coats to ferrous metals that will be inaccessible after erection.
D. Retouch, in field, all scraped, abraded and unpainted surfaces. Paint as specified for shop coats.
E. Painting specified here does not count as a coat for finish painting.
F. Shop painting will not be required for galvanized metal, stainless steel, aluminum, copper, brass, bronze and
metals to receive special coatings unless specifically mentioned.
3.05 CLEANING
A. Refer to Section 01710 - Cleaning.
B. Clean items prior to final inspection in accordance with the recommendations of the fabricator.
END OF SECTION
NAPA CENTURY CENTER XD 12
#165582