specs

SECTION 05300
METAL ROOF DECK
PART 1 - GENERAL
1.01. SUMMARY
A. Section Includes:
1. Metal Roof Deck
2. Sheet Metal Accessories
1.02. REFERENCES (LATEST EDITION AVAILABLE)
A. Steel Deck Institute (SDI), Specifications and Commentary for Steel Roof Deck.
B. American Iron and Steel Institute (AISI), Specification for the Design of Cold-Formed Steel Structural
Members.
C. American Welding Society:
1. AWS A5.1, Specification for Steel, Carbon, Covered Arc Welding Electrodes.
2. AWS D1.3, Structural Welding Code - Sheet Steel.
D. American Society for Testing and Materials:
1. ASTM A90, Standard Tests for Weight of Coating on Zinc-Coated (Galvanized) Iron or Steel Articles.
2. ASTM A653, Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-
Coated (Galvannealed) by the Hot-Dip Process.
3. ASTM A924, Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the
Hot-Dip Process
4. ASTM A1008, Standard Specification for Steel Sheet, Cold-Rolled Sheet, Carbon, Structural.
5. ASTM B117, Standard Salt Spray (Fog) Test.
6. ASTM D714, Evaluating Degree of Blistering of Paints.
7. ASTM D1654, Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments.
E. Factory Mutual Global:
1. FM Global Property Loss Prevention Data Sheet 1-28, Wind Design
2. FM Global Property Loss Prevention Data Sheet 1-29, Roof Deck Securement and Above-Deck Roof
Components
1.03. SUBMITTALS
A. Shop Drawings: Submit shop drawings for review prior to fabrication or installation of materials.
1. Indicate erection layouts, details, steel deck dimensions and section properties, and installation
instructions. Show supporting framing, lengths and markings of deck to correspond with sequence and
procedure to be followed in installing and fastening deck. Show methods of fastening deck and installing
accessories. Show locations, types and sequence of welded connections for deck units.
2. Indicate welds using standard AWS welding symbols. Show size and number of holes to be cut in deck.
3. Indicate allowable diaphragm shear capacity corresponding to pattern and type of connections provided.
B. Recycled Content:
1. Indicate recycled content; indicate percentage of pre-consumer and post-consumer recycled content per
unit of product.
2. Indicate material cost of product less labor included in project.
3. If recycled content product is part of an assembly, indicate the percentage of recycled content product in
the assembly by weight.
C. Local / Regional Materials:
1. Sourcing location(s): Indicate location of extraction, harvesting, and recovery; indicate distance between
extraction, harvesting, and recovery and the project site.
2. Manufacturing location(s): Indicate location of manufacturing facility; indicate distance between
manufacturing facility and the project site.
3. Product Value: Indicate dollar value of product containing local/regional materials; include materials cost
only.
4. Product Component(s) Value: Where product components are sourced or manufactured in separate
locations, provide location information for each component. Indicate the percentage by weight of each
component per unit of product.
D. Submit information on EPA Waste Minimization Priority Chemicals associated with products provided under
work of this Section. For each Priority Chemical, indicate whether the Priority Chemical is produced as a by-
NAPA CENTURY CENTER XD 12
#165582