specs

SECTION 03600
GROUTING STEEL BASE PLATES
PART 1 - GENERAL
1.01. SUMMARY
A. Section Includes
1. Grout for steel baseplates
1.02. REFERENCE STANDARDS
A. American Society for Testing and Materials:
1. ASTM C1090, Standard Test Method for Measuring Changes in Height of Cylindrical Specimens from
Hydraulic Cement Grout
2. ASTM C1107, Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Non-Shrinkable)
B. Corps of Engineers:
1. CRD-C621, Specification for Non-Shrink Grout.
1.03. SUBMITTALS
A. Product Data: submit manufacturer's data indicating product compliance for the following:
1. Non-shrink grout.
B. Recycled Content:
1. Indicate recycled content; indicate percentage of pre-consumer and post-consumer recycled content per
unit of product.
2. Indicate material cost of product less labor included in project.
3. If recycled content product is part of an assembly, indicate the percentage of recycled content product in
the assembly by weight.
C. Local / Regional Materials:
1. Sourcing location(s): Indicate location of extraction, harvesting, and recovery; indicate distance between
extraction, harvesting, and recovery and the project site.
2. Manufacturing location(s): Indicate location of manufacturing facility; indicate distance between
manufacturing facility and the project site.
3. Product Value: Indicate dollar value of product containing local/regional materials; include materials cost
only.
4. Product Component(s) Value: Where product components are sourced or manufactured in separate
locations, provide location information for each component. Indicate the percentage by weight of each
component per unit of product.
D. Submit information on EPA Waste Minimization Priority Chemicals associated with products provided under
work of this Section. For each Priority Chemical, indicate whether the Priority Chemical is produced as a byproduct
during manufacture and whether it is contained in the final product. Indicate amount produced during
manufacture and the amount contained in final product in terms of percentage by weight per unit of product.
1.04. DELIVERY, STORAGE AND HANDLING
A. Store grout materials in dry condition above ground.
PART 2 - PRODUCTS
2.01. MATERIALS
A. Non-Shrink Grout:
1. Pre-mixed non-shrinking, high strength grout.
2. Compressive strength in 28 days: 5000 psi minimum, but not less than specified strength of base
concrete.
3. Comply with ASTM C1107, and CRD-C621.
4. Non-oxidizing, if grout will be permanently exposed to view.
5. Exhibits positive expansion when testing in accordance with ASTM C1090.
6. Acceptable products:
a. Euco N-S Grout, manufactured by Euclid Chemical Co.
b. Masterflow 713, manufactured by Master Builders Co.
NAPA CENTURY CENTER XD 12
#165582