specs

Section 02825
Page 1
SECTION 02825
STAINLESS STEEL CABLE PLANT SUPPORT SYSTEM
PART 1 GENERAL
1.01 SUMMARY
A. Section Includes:
1. Stainless Steel Wire Rope Assemblies
2. Stainless Steel Fittings, Anchors, Hardware, and Accessories
B. Related Sections:
1. Division 32 Section “Plants”
1.02 REFERENCES
A. General: Standards listed by reference, including revisions by issuing authority, form a part of this
specification section to extent indicated. Standards listed are identified by issuing authority, authority
abbreviation, designation number, title or other designation established by issuing authority. Standards
subsequently referenced herein are referred to by issuing authority abbreviation and standard designation.
B. American Society for Testing and Material (ASTM International)
1. ASTM A492 - Specification for Stainless Steel Rope Wire.
2. ASTM A554 – Welded Stainless Steel Mechanical Tubing.
3. ASTM A554 – Specification for Welded Stainless Steel Mechanical Tubing
4. ASTM F1145 - Specification for Turnbuckles, Swaged, Welded, Forged.
1.03 SYSTEM DESCRIPTION
A. Performance Requirements: Provide Stainless Steel Cable Railing System and mounting hardware which
have been manufactured and installed to meet or exceed manufacturer’s and project performance criteria.
1.04 SUBMITTALS
B. Submit submittals in accordance with Conditions of the Contract and Division 1 Submittal Procedures
Section.
C. Product Data: Submit Manufacturer’s product data sheet for specified products.
1. Recycled Content:
a. Indicate recycled content; indicate percentage of pre-consumer and post-consumer recycled
content per unit of product.
b. Indicate relative dollar value of recycled content product to total dollar value of product
included in project.
c. If recycled content product is part of an assembly, indicate the percentage of recycled content
product in the assembly by weight.
d. If recycled content product is part of an assembly, indicate relative dollar value of recycled
content product to total dollar value of assembly.
2. Local/Regional Materials:
a. Sourcing location(s): Indicate location of extraction, harvesting, and recovery; indicate distance
between extraction, harvesting, and recovery and the project site.
b. Manufacturing location(s): Indicate location of manufacturing facility; indicate distance
between manufacturing facility and the project site.
c. Product Value: Indicate dollar value of product containing local/regional materials; include
materials cost only.
d. Product Component(s) Value: Where product components are sourced or manufactured in
separate locations, provide location information for each component. Indicate the percentage
by weight of each component per unit of product.
NAPA CENTURY CENTER XD 12
#165582