Buffalo Wild Wings

Buffalo Wild Wings
SECTION 06200 - FINISH CARPENTRY
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Installation of finish millwork items furnished by Owner’s Millwork Vendor.
B. Adjustable Shelf Hardware.
C. Hardware and attachment accessories.
1.02 RELATED SECTIONS
A. Section 06110 - Rough Carpentry.
B. Section 06410 - Custom Cabinets.
C. Section 06415 - Countertops.
D. Section 09260 - Gypsum Board Assemblies.
E. Section 09900 - Paints and Coatings: Painting and finishing of millwork items.
1.03 DELIVERY, STORAGE, AND HANDLING
A. Protect materials against weather and contact with damp or wet surfaces. Stack materials flat
with spacers between each bundle to provide air circulation. Provide for air circulation within
and around stacks and under temporary coverings.
1.04 PROJECT CONDITIONS
A. Environmental Limitations: Do not have materials delivered or install interior finish carpentry
materials until building is enclosed and weatherproof, wet work in space is completed and
nominally dry, and HVAC system is operating and maintaining temperature and relative
humidity at occupancy levels during the remainder of the construction period.
PART 2 PRODUCTS
2.01 WOOD-BASED COMPONENTS
A. Wood fabricated from old growth timber is not permitted.
2.02 LUMBER MATERIALS
A. (WD1) Select White Maple: maximum moisture content of 6 percent; with vertical grain, of
quality suitable for transparent finish. Furnished by Millwork Vendor for installation under this
Section.
B. (WD2) Southern Pine: No. 1, maximum moisture content of 6 percent; with vertical grain, of
quality suitable for intended use.
2.03 ADJUSTABLE SHELF HARDWARE
A. Standards for Adjustable Shelf Brackets: Knape & Vogt, No. KV87-36” – White.
B. Adjustable Shelf Brackets: Knape & Vogt, No. KV187-18” – White.
C. Accessories: Provide bracket manufacturers standard shelf rests as applicable for installation
indicated on drawings. Finish: White.
D. Shelves: Furnished by Millwork Vendor.
04-27-11 FINISH CARPENTRY
06200 -1