Buffalo Wild Wings

DIVISION 3 - CONCRETE
SECTION 03300 - CAST-IN-PLACE CONCRETE
Indicated on Drawings as:
(CONC1): Unexposed Form Finish, (Rough "as cast"), typical unless otherwise
indicated.
(CONC2): Interior Concrete Slabs, Steel trowel (smooth).
(CONC3): Exterior Horizontal Concrete Surfaces, Float finish, Heavy broom.
(Vapor Retarder): Underslab, 10mil thick multi-layer plastic sheet.
SECTION 03351 - CONCRETE INTEGRAL HARDENER AND SEALER
Indicated on Drawings as: (SC) Sealed Concrete
(SC): Water based, concrete hardener / sealer. Exterior horizontal concrete surfaces.
DIVISION 4 - MASONRY
SECTION 04065 – MORTAR AND MASONRY GROUT
Indicated on Drawings as:
(Mortar): Portland cement lime mortar, masonry cement not allowed.
Mortar Colors:
1. LaFarge North America; “Santan”; color to match (FBR1) Face Brick. Refer to
Section 04810.
2. Spec Mix; Color No. LM-9327-50 #930; color to match (CMU2) Rock Face
Block. Refer to Section 04810.
Mortar Locations:
1. Locations of colored mortar: Used to match Face Brick and Rock Faced Block
Units.
2. Natural colored mortar for all other locations.
(Grout): 3000psi grout.
SECTION 04810 - UNIT MASONRY ASSEMBLIES
Indicated on Drawings as:
Concrete Masonry Units
Face Brick Units
(CMU1): Normal weight hollow concrete masonry units.
(CMU2): Normal weight, Integral colored, Rock Face concrete masonry units.
1. Manufacturers: Amcon Block and Precast, Inc., St. Cloud, MN 56304.
Tel: 888-251-6030. www.amconblock.com
2. Color: Custom BWW Blend # RF-526.
(FBR): Type FBS, Grade SW brick units.
1. Size: 3-5/8 inches wide by 2-1/4 inches high by 7-5/8 inches long.
2. Manufacturers: Sioux City Brick and Tile Company, Sioux City, Iowa 51102.
Tel: 712-258-7571. www.siouxcitybrick.com
3. Color: Toasted Fine Art Velour.
Material Identification Codes List 11-01-11
00011-2