Buffalo Wild Wings
Buffalo Wild Wings
Buffalo Wild Wings
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Buffalo</strong> <strong>Wild</strong> <strong>Wings</strong><br />
PART 1 GENERAL<br />
1.01 SECTION INCLUDES<br />
SECTION 05400 - COLD FORMED METAL FRAMING<br />
A. Formed steel stud exterior wall framing and bracing.<br />
1.02 RELATED REQUIREMENTS<br />
A. Section 04810 - Unit Masonry Assemblies.<br />
B. Section 05120 - Structural Steel.<br />
C. Section 05310 - Steel Deck.<br />
D. Section 09260 - Gypsum Board Assemblies: Lightweight, non-load bearing metal stud framing.<br />
1.03 REFERENCE STANDARDS<br />
A. AISI SG02-1 - North American Specification for the Design of Cold-Formed Steel Structural<br />
Members; American Iron and Steel Institute<br />
B. AISI SG-971 - Specification for the Design of Cold-Formed Steel Structural Members; American<br />
Iron and Steel Institute<br />
C. ASTM A 153/A 153M - Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel<br />
Hardware<br />
D. ASTM A 123/A 123M - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron<br />
and Steel Products.<br />
E. ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or<br />
Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.<br />
F. ASTM C 955 - Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs,<br />
Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and<br />
Metal Plaster Bases.<br />
G. AWS D1.1/D1.1M - Structural Welding Code - Steel; American Welding Society.<br />
H. SSPC-Paint 20 - Zinc-Rich Primers (Type I, "Inorganic," and Type II, "Organic"); Society for<br />
Protective Coatings.<br />
1.04 SUBMITTALS<br />
A. See Section 01300 - Administrative Requirements, for submittal procedures.<br />
B. Product Data: Provide data on standard framing members; describe materials and finish,<br />
product criteria, limitations.<br />
C. Shop Drawings: Show layout, spacing, sizes, thicknesses, and types of cold-formed metal<br />
framing; fabrication; and fastening and anchorage details, including mechanical fasteners.<br />
Show reinforcing channels, opening framing, supplemental framing, strapping, bracing, bridging,<br />
splices, accessories, connection details, and attachment to adjoining work.<br />
D. Welders Certificates: Certify welders employed on the Work, verifying AWS qualification within<br />
the previous 12 months.<br />
1.05 QUALITY ASSURANCE<br />
A. Calculate structural properties of framing members in accordance with requirements of AISI<br />
North American Specification for the Design of Cold-Formed Steel Structural Members.<br />
04-27-11 COLD FORMED METAL FRAMING<br />
05400 -1
Change language