Buffalo Wild Wings
Buffalo Wild Wings
Buffalo Wild Wings
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Buffalo</strong> <strong>Wild</strong> <strong>Wings</strong><br />
SECTION 03300 - CAST- IN - PLACE CONCRETE<br />
PART 1 GENERAL<br />
1.01 SECTION INCLUDES<br />
A. Concrete formwork.<br />
B. Floors and slabs on grade.<br />
C. Concrete reinforcement.<br />
D. Joint devices associated with concrete work.<br />
E. Concrete curing.<br />
1.02 RELATED SECTIONS<br />
A. Section 01300 - Administrative Requirements.<br />
B. Section 01400 - Quality Requirements.<br />
C. Section 03351 - Concrete Integral Hardener and Sealer.<br />
D. Section 07900 - Joint Sealers.<br />
1.03 REFERENCES<br />
A. American Concrete Institute, (ACI):<br />
1. ACI 211.1 - Standard Practice for Selecting Proportions for Normal, Heavyweight, and<br />
Mass Concrete; American Concrete Institute International.<br />
2. ACI 301 - Specifications for Structural Concrete for Buildings; American Concrete Institute<br />
International.<br />
3. ACI 302.1R - Guide for Concrete Floor and Slab Construction; American Concrete Institute<br />
International.<br />
4. ACI 304R - Guide for Measuring, Mixing, Transporting, and Placing Concrete; American<br />
Concrete Institute International.<br />
5. ACI 305R - Hot Weather Concreting; American Concrete Institute International.<br />
6. ACI 306R - Cold Weather Concreting; American Concrete Institute International..<br />
7. ACI 308R - Guide to Curing Concrete; American Concrete Institute International.<br />
8. ACI 318 - Building Code Requirements for Reinforced Concrete and Commentary;<br />
American Concrete Institute International.<br />
B. American Society for Testing and Materials, (ASTM):<br />
1. ASTM A 185/A 185M - Standard Specification for Steel Welded Wire Reinforcement, Plain,<br />
for Concrete.<br />
2. ASTM A 615/A 615M - Standard Specification for Deformed and Plain Billet-Steel Bars for<br />
Concrete Reinforcement.<br />
3. ASTM C 33 - Standard Specification for Concrete Aggregates.<br />
4. ASTM C 39/C 39M - Standard Test Method for Compressive Strength of Cylindrical<br />
Concrete Specimens.<br />
5. ASTM C 94/C 94M - Standard Specification for Ready-Mixed Concrete.<br />
6. ASTM C 143/C 143M - Standard Test Method for Slump of Hydraulic-Cement Concrete.<br />
7. ASTM C 150 - Standard Specification for Portland Cement.<br />
8. ASTM C 171 - Standard Specification for Sheet Materials for Curing Concrete.<br />
9. ASTM C 173/C 173M - Standard Test Method for Air Content of Freshly Mixed Concrete by<br />
the Volumetric Method.<br />
10. ASTM C 260 - Standard Specification for Air-Entraining Admixtures for Concrete.<br />
11. ASTM C 309 - Standard Specification for Liquid Membrane-Forming Compounds for<br />
Curing Concrete.<br />
12. ASTM C 494/C 494M - Standard Specification for Chemical Admixtures for Concrete.<br />
04-27-11 CAST-IN-PLACE CONCRETE<br />
03300 -1
Change language