Buffalo Wild Wings

Buffalo Wild Wings
PART 2 PRODUCTS
Not Used
PART 3 EXECUTION
3.01 PREPARATION
A. Examine the areas and conditions under which work of this section will be performed. Correct
conditions detrimental to timely and proper execution of the Work. Do not proceed until
unsatisfactory conditions are corrected.
B. In company with the Owner, Architect and appropriate engineering disciplines, visit the site and
verify the extent of selective demolition required.
1. Carefully identify limits of selective demolition.
2. Mark interface surfaces as required to enable workers to identify items to be removed and
items to be left intact.
C. Provide, erect, and maintain temporary barriers at locations indicated and as otherwise
determined to be necessary.
D. Erect and maintain weatherproof closures for exterior openings.
E. Erect and maintain temporary partitions to prevent spread of dust, odors, and noise to permit
continued building occupancy.
F. Protect existing materials that are not to be demolished.
G. Prevent movement of structure; provide bracing and shoring.
H. Notify affected utility companies before starting work and comply with their requirements.
I. Mark location and termination of utilities.
J. Provide appropriate temporary signage including signage for exit or building egress.
3.02 DEMOLITION
A. Disconnect, remove, and identify designated utilities within demolition areas.
B. Demolish in an orderly and careful manner. Protect existing supporting structural members.
C. Remove demolished materials from site except where specifically noted otherwise. Do not burn
or bury materials on site.
D. Remove materials as demolition progresses. Upon completion of demolition, leave areas in
clean condition.
E. Remove temporary facilities.
END OF SECTION
04-27-11 MINOR DEMOLITION FOR REMODELING
02223 -2