Buffalo Wild Wings

Buffalo Wild Wings
SECTION 01620 - REFERENCES
PART 1—GENERAL
1.01 SUMMARY
A. Section Includes:
1. Definitions of terms.
2. Provisions of reference standards.
1.02 DEFINITIONS
A. By Owner: Items that will be ordered, paid for and shipped to Project by Owner. Contractor to
receive, unload, unpack or uncrate, protect, move into place, install and connect these items as
specified or indicated in the Contract Documents.
B. Provide: Furnish and install, including without limitation, labor, materials, equipment,
transportation, services, and other items required to complete referenced tasks.
C. Furnish: Pay for, deliver (or receive), unload, inspect, and store as specified or directed while
retaining care, custody and control until received for installation by others.
D. Install: Receive, set or place in position, make required connections, adjust and test for
satisfactory performance and operation.
E. Product: Materials, systems, and equipment incorporated in or to be incorporated in the Project.
F. Herein: As used in the Contract Documents refers to the contents of a particular Section, of the
contents within parts of the Conditions of the Contract and Division 1 - General Requirements.
G. Not In Contract (N.I.C.): Products not in the Contract, but which may require provisions in the
construction for future installation by Others.
H. Work: Construction and services required by Contract Documents, whether completed of
partially completed, and includes labor, materials, equipment and services provided or to be
provided by Contractor to fulfill the Contractor’s obligations. The Work may constitute the whole
or a part of the Project.
1.03 REFERENCE STANDARDS
A. Reference Standards: For products or workmanship specified by association, trade, Federal
Standards, or other reference standards, comply with requirements of the standard, except
when more rigid requirements are specified or are required by governing regulations.
B. Standard Dates: Where no specific date of standard is specified, use the most current issued
standard that is in effect as of the Project Bid date.
C. When required by individual Specification Sections or otherwise needed for proper performance
of Work, obtain a copy of the standard. Maintain a copy of standard at Site during submittals,
planning, and progress of the affected work, until Substantial Completion.
PART 2 PRODUCTS
Not used
PART 3 EXECUTION
Not Used
END OF SECTION
04-27-11 REFERENCES
01620 -1