Buffalo Wild Wings

Buffalo Wild Wings
or trademark, provide a product that complies with those characteristics and other Contract
requirements.
5. Where compliance with performance requirements is specified, provide products that
comply and are recommended in writing by the manufacturer for the Application.
6. Where compliance with codes, regulations, or standards is specified, select a product that
complies with the codes, regulations, or standards referenced.
D. Unless otherwise indicated, architect will select color, pattern, and texture of each product from
manufacturer's full range of standard options.
2.02 OWNER-FURNISHED PRODUCTS
A. The following products will be furnished by Owner and shall be installed by Contractor as part of
the Work:
1. See the Comprehensive Equipment Schedule and Project Responsibility Matrix on the
Architectural Drawing G100.
B. Contractor shall coordinate all delivery dates and installation requirements & verify quantities of
Owner-furnished items with the Owner prior to the start of Construction.
PART 3—EXECUTION
Not used
END OF SECTION
04-27-11 PRODUCT REQUIREMENTS
01600 -2