Buffalo Wild Wings

1. Recessed fixtures designed expressly for lay-in mounting shall be installed in that
manner. Grid system shall be supported from structure as required by ceiling
system installer.
2. Provide flexible metal conduit or MC cable connections for all recessed type
fixtures in lay-in ceilings with sufficient length to permit fixture to be lifted out.
Maximum flexible conduit shall not exceed six feet. One to four fixtures may be
served by a single common outlet box, securely fastened to structure or ceiling
support members and within 30 inches of ceiling tile.
3. Provide fixture retainers or clips for each fixture installed in exposed grid
suspended ceilings in accordance with IBC and state building codes.
3.4 SPECIAL FIXTURE COORDINATION
A. Storage and Mechanical/Electrical Rooms: Contractor shall verify actual fixture locations
with Architect. Fixture locations shall be revised as required to clear all equipment, ducts,
and piping.
END OF SECTION 16500
LIGHTING
16500-2