Buffalo Wild Wings

SECTION 16140 - WIRING DEVICES
PART 1. - GENERAL
1.1 SUMMARY
A. Section Includes: Provide all labor, materials and accessories as required to install and
connect wiring devices wherever required by Drawings and Specifications.
1.2 SUBMITTALS
A. Shop Drawings: Provide Shop Drawings in accordance with Section 16010.
PART 2. - PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturers:
2.2 DEVICE COLOR
1. All wiring devices shall be of one manufacturer as follows (Leviton and Hubbell
catalog numbers are used to specify required type and quality):
a. Arrow-Hart
b. Eagle
c. General Electric
d. Hubbell
e. Leviton
f. Pass & Seymour
g. Slater
h. Sierra
2. All wall plates shall be of one manufacturer as follows:
a. Arrow Hart
b. Leviton
c. Sierr2
d. Slater
A. General Requirements: Unless noted otherwise, all wiring devices and wall plates shall
be coordinated with the Architect.
2.3 SWITCHES
A. General Requirements: Switches for lighting loads shall be 20 amp, 120 volt, quiet toggle
type and side wired.
B. Switches shall be equal to the following:
1. 20 amp, 120/277 volt, single pole Leviton #1221-2X
2. 20 amp, 120/277 volt, 3-way Leviton #1223-2X
3. 20 amp, 120/277 volt, 4-way Leviton #1224-2X
C. Switches controlling over nine amps shall be 20 amp rated.
WIRING DEVICES
16140-1