Buffalo Wild Wings

SECTION 16118 - FUSES
PART 1. - GENERAL
1.1 SUMMARY
A. Provide all labor, materials, and accessories as required to protect feeders and branch
circuits for panels, motors, and electrical appliances wherever required by the Drawings
and Specifications or by applicable provisions of the National Electric Code (NEC).
PART 2. - PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturers: All fuses shall be of one manufacturer as follows:
2.2 FUSE TYPES
1. Bussman
2. Littlefuse
3. Shawmut
A. 600 Ampere and Below (Bussman model numbers used to set the minimum standard for
material and equipment):
1. All fuses shall have 300,000 amperes RMS interrupting rating.
2. Fuses shall be Underwriters’ Laboratories Class R current limiting, dual element
time delay, rejection type.
3. Fuses shall be Bussman LPN-RK_SP.
B. 601 Ampere and Above (Bussman model numbers used to set the minimum standard for
material and equipment):
1. All fuses shall have 200,000 amperes RMS interrupting rating.
2. Fuses shall be Underwriter’ Laboratories Class L current limiting, time delay,
pure silver link type.
3. Fuses shall be Bussman KRP-C_SP.
PART 3. - EXECUTION
3.1 FUSE INSTALLATION
A. General Requirements:
1. Provide fuses in all fusible switches
2. Provide all fuses of ampere ratings required by the NEC to protect feeders and
equipment.
END OF SECTION 16118
FUSES
16118-1