Buffalo Wild Wings

1.4 MATERIALS AND EQUIPMENT
A. Materials:
1. All materials shall be new and of the type and quality specified herein.
2. Specific materials and equipment specified is intended to establish a minimum
standard of required quality. Where specified materials and equipment fail to
meet minimum standards of existing federal, state and local codes and
ordinances, the governing codes and ordinances shall prevail.
3. The Contractor shall provide all minor miscellaneous materials necessary for the
complete mechanical installation.
4. For materials and equipment specified by description only, the Contractor shall
provide materials or equipment suitable for the purpose intended. These shall be
in conformance with all governing codes, these Specifications and normal trade
practice.
5. For materials or equipment specified by manufacturer’s name and catalog
number, the Contractor shall provide the item specified. The Contractor may
submit materials and equipment for prior approval to the Engineer.
6. Supply materials and equipment to the site in original packages, containers or
crates insofar as is practical. It shall be the Contractor’s responsibility to schedule
deliveries in accordance with the overall Project schedule. The Contractor shall
closely coordinate all deliveries with other Contractors and the Engineer.
7. Provide for proper receipt, handling, storage, and protection from the elements
for all materials and equipment to be used on this Project so as to effectively
prevent damage or deterioration. Materials or equipment sustaining damage or
undue deterioration from any cause whatsoever shall be replaced or repaired by
Contractor as required by the Engineer.
8. The Contractor shall properly protect all equipment from damage during
construction. Thoroughly clean all fixtures, equipment and other supplied
materials. Make all necessary repairs and apply touch up paint as required prior
to final inspection and contract close out.
9. All materials and equipment shall be listed by Underwriters’ Laboratories, Inc.
(UL). Materials and Equipment shall meet the UL requirements of each standard
in every case where such a standard has been established for that particular type
of material. Equipment shall be UL listed as an entire assembly or system.
B. Prior Approvals
1. All requests for prior approvals must be received by the Engineer at least seven
working days prior to bid date. Applications for prior approval shall be considered
only from Contractors submitting bids on the Project. Contractors shall determine
whether materials receiving prior approval are actually in accordance with details
of the Specifications.
2. The Contractor shall be responsible for all deficiencies that may exist from the
use of substituted products or equipment, including all additional labor and
materials required to complete the work. All dimensions and characteristics of
substituted products shall be verified and coordinated with all affected trades and
Subcontractors. Any required changes or modifications to the work of any other
trade or Subcontractor incurred due to using accepted substituted products shall
be coordinated and performed by this Contractor at no additional cost to the
Owner.
GENERAL CONDITIONS
16010-3