Buffalo Wild Wings

3. Electrical Drawings are diagrammatic and are intended to show approximate
location only. Placement of electrical equipment and devices shall not interfere
with locations or clearances of other trades’ materials or equipment.
4. Dimensions given on the Drawings shall take precedence over scaled
dimensions. Dimensions, whether given in figures or scaled, shall be verified in
the field.
5. Contractor shall verify that the equipment to be furnished under Contract will fit
within the available space.
6. Notify the Architect and Engineer of any discrepancies between Electrical,
Architectural and Mechanical Drawings.
7. Verify items such as door swings, window locations, casework, etc., before
installing any electrical equipment or devices. All devices conflicting with and
other trades work due to lack of coordination shall be relocated at no additional
cost to the Owner.
D. The following terms used in the Drawings and Specifications shall be defined as follows:
1. Contractor: Shall mean Electrical Contractor or any of their Subcontractors.
2. Work: Shall mean labor and/or materials of the Electrical Contractor or any of
their Subcontractors.
3. Furnish: Shall mean purchase, submit for Engineer approval, coordinate with
Contract Documents and deliver to site in new, undamaged condition.
4. Install: Shall mean to schedule for delivery, deliver or have delivered to the site,
store as directed, protect from damage, set in place, make all necessary final
connections, test as required and turn over to the Owner in full operating
condition.
5. Provide: Shall mean furnish and install.
6. Connect: Shall mean to bring electrical service and/or line voltage control wiring
to equipment, make all final connections, provide all necessary miscellaneous
materials required and do final check out to ensure proper equipment
connections.
E. CAD and Drawing Files:
1. Electrical CAD drawings prepared by of Barr Engineering and Buffalo Wild
Wings, Inc. for this Project are instruments of for use solely with respect to this
Project. During the course of the implementation of the Project, and with
approval by either party, copies may be obtained of CAD drawings for the
preparation of Shop Drawings. These CAD drawings shall not be used on other
projects, for additions to this Project, or for completion of this Project by others,
unless both Buffalo Wild Wings, Inc and Barr Engineering Company provide
written permission to do so. Any revisions, additions and/or deletions to these
CAD drawings, either intentional or unintentional, shall be made at the full risk of
the person(s) making such revisions, additions and/or deletions. Such person(s)
shall hold harmless and indemnify Barr Engineering Company of any and all
responsibilities and liabilities.
2. CAD drawings files of Architectural floor plans, elevations, sections, etc, shall be
requested directly from the Architect.
1.3 COORDINATION OF DRAWINGS
A. Coordinate scheduling and sequencing required for movement and positioning of large
equipment into the building with all other Contractors to minimize impact on their work.
B. This Contractor shall provide any and all input required to complete these drawings.
GENERAL CONDITIONS
16010-2