Buffalo Wild Wings

SECTION 16010 - GENERAL CONDITIONS
PART 1. - GENERAL
1.1 SUMMARY
A. General and Supplementary conditions within Division 0 and 1 are hereby incorporated
and become part of these Specifications, covering all work in Division 16000, Electrical.
B. Before submitting a proposal on the project, the Contractor shall visit the site and
familiarize themselves with the conditions and limitations affecting Division 16000 work.
No additional costs to the Owner shall be allowed for items verifiable during site visits.
C. Contractor shall provide sufficient workers and materials to keep pace with the
construction schedule. Contractor shall place orders for equipment such that job progress
is not slowed due to late delivery and shall confirm delivery dates with suppliers.
D. The Contractor shall provide office space and storage for materials and equipment
supplied as required. Location shall be as directed by the General Contractor or the
Architect/Engineer.
E. Upon completion of the work shown and specified under Division 16000 and prior to final
close out of the Project, the Contractor shall verify in writing that all systems are 100%
complete and operating properly. This notification shall include copies of all
Subcontractor notifications. Any system not operating properly at final inspection shall be
immediately repaired and demonstrated to the Engineer.
F. Rebates or credits provided by utility companies or equipment manufacturers shall be
directly credited to the Owner.
1.2 ELECTRICAL PLANS
A. The Electrical Drawings and Specifications shall form a set of Plans for the electrical
work. Neither the Drawings nor the Specifications shall be complete without the other.
Any item shown on the Drawings or specified in the Specifications shall be considered as
shown and specified on both.
B. Any questions regarding the intent of the Drawings or Specifications shall be brought to
the Engineer’s attention as soon as possible. If direction from the Engineer cannot be
obtained due to time or communication limitations, the greater quantity, higher quality or
condition most favorable to the Owner shall be assumed. Contractor shall provide all
labor, materials, equipment, and miscellaneous items necessary for a complete and
operational electrical installation, as shown on the Drawings and called for in these
Specifications.
C. Drawings:
1. Contractor shall familiarize themselves with Architectural, Structural and
Mechanical Drawings and Specifications. Coordinate all shafts, chases, furred
spaces, suspended ceilings, locations of equipment, etc.
2. Electrical Contractor shall coordinate routing of all conduit and wire within soffits
provided by the General Contractor. The Electrical Contractor shall provide all
soffiting required to cover installations not coordinated or specifically approved by
the Architect and Engineer.
GENERAL CONDITIONS
16010-1