Buffalo Wild Wings

3. The cost for mechanical CAD drawing files, provided in AutoCAD, will be $50.00
per sheet payable directly to Engineer of Record CAD files will be sent via email
only.
1.3 COORDINATION OF DRAWINGS
A. Contractor shall submit a ¼-inch scale drawing to the Engineer indicating placement of all
mechanical and electrical systems and equipment. Indicate proposed locations of all
major equipment and materials, including but not limited to service equipment, exterior
wall and foundation penetrations, fire-rated wall and floor penetrations, sizes and location
of required concrete pads and bases, and mechanical/electrical equipment room layouts.
This effort will require each trade to closely work together to produce a ¼=1’-0” set of
coordination drawings for each area of the building.
B. Coordinate scheduling and sequencing required for movement and positioning of large
equipment into the building with all other Contractors to minimize impact on their work.
C. This Contractor shall provide any and all input required to complete these drawings.
1.4 MATERIALS AND EQUIPMENT
A. Materials:
1. All materials shall be new and of the type and quality specified herein.
2. Specific materials and equipment specified is intended to establish a minimum
standard of required quality. Where specified materials and equipment fail to
meet minimum standards of existing federal, state and local codes and
ordinances, the governing codes and ordinances shall prevail.
3. The Contractor shall provide all minor miscellaneous materials necessary for the
complete mechanical installation.
4. For materials and equipment specified by description only, the Contractor shall
provide materials or equipment suitable for the purpose intended. These shall be
in conformance with all governing codes, these Specifications and normal trade
practice.
5. For materials or equipment specified by manufacturer’s name and catalog
number, the Contractor shall provide the item specified. The Contractor may
submit materials and equipment for prior approval to the Engineer.
6. Supply materials and equipment to the site in original packages, containers or
crates insofar as is practical. It shall be the Contractor’s responsibility to schedule
deliveries in accordance with the overall Project schedule. The Contractor shall
closely coordinate all deliveries with other Contractors.
7. Provide for proper receipt, handling, storage, and protection from the elements
for all materials and equipment to be used on this Project so as to effectively
prevent damage or deterioration. Materials or equipment sustaining damage or
undue deterioration from any cause whatsoever shall be replaced or repaired by
Contractor as required by the Engineer.
06/25/09 MECHANICAL GENERAL CONDITIONS
15010-3