Buffalo Wild Wings
Buffalo Wild Wings
Buffalo Wild Wings
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SECTION 15010 – MECHANICAL GENERAL CONDITIONS<br />
PART 1. - GENERAL<br />
1.1 SUMMARY<br />
A. General and Supplementary conditions within Division 0 and 1 are hereby incorporated<br />
and become part of these Specifications, covering all work in Division 15000, Mechanical.<br />
B. Before submitting a proposal on the project, the Contractor shall visit the site and<br />
familiarize themselves with the conditions and limitations affecting Division 15000 work.<br />
No additional costs to the Owner shall be allowed for items verifiable during site visits.<br />
C. Contractor shall provide sufficient workers and materials to keep pace with the<br />
construction schedule. Contractor shall place orders for equipment such that job progress<br />
is not slowed due to late delivery and shall confirm delivery dates with suppliers.<br />
D. The Contractor shall provide office space and storage for materials and equipment<br />
supplied as required. Location shall be as directed by the General Contractor or the<br />
Architect.<br />
E. Upon completion of the work shown and specified under Division 15000 and prior to final<br />
close out of the Project, the Contractor shall verify in writing that all systems are 100%<br />
complete and operating properly. This notification shall include copies of all<br />
Subcontractor notifications. Any system not operating properly at final inspection shall be<br />
immediately repaired and demonstrated to the Engineer.<br />
F. Rebates or credits provided by utility companies or equipment manufacturers shall be<br />
directly credited to the Owner.<br />
1.2 MECHANICAL PLANS<br />
A. The Mechanical Drawings and Specifications shall form a set of Plans for the mechanical<br />
work. Neither the Drawings nor the Specifications shall be complete without the other.<br />
Any item shown on the Drawings or specified in the Specifications shall be considered as<br />
shown and specified on both.<br />
B. Any questions regarding the intent of the Drawings or Specifications shall be brought to<br />
the Engineer’s attention as soon as possible. If direction from the Engineer cannot be<br />
obtained due to time or communication limitations, the greater quantity, higher quality or<br />
condition most favorable to the Owner shall be assumed. Contractor shall provide all<br />
labor, materials, equipment, and miscellaneous items necessary for a complete and<br />
operational mechanical installation, as shown on the Drawings and called for in these<br />
Specifications.<br />
C. Drawings:<br />
1. Contractor shall become familiar with Architectural, Structural and Electrical<br />
Drawings and Specifications. Coordinate all shafts, chases, furred spaces,<br />
suspended ceilings, locations of equipment, etc.<br />
2. Mechanical Contractor shall coordinate routing of all piping and ductwork within<br />
soffits provided by the General Contractor. The Mechanical Contractor shall<br />
provide all soffiting required to cover installations not coordinated or specifically<br />
approved by the Architect and Engineer.<br />
06/25/09 MECHANICAL GENERAL CONDITIONS<br />
15010-1