Buffalo Wild Wings
Buffalo Wild Wings
Buffalo Wild Wings
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Buffalo</strong> <strong>Wild</strong> <strong>Wings</strong><br />
2.03 MATERIALS<br />
A. Stainless Steel Sheet: ASTM A 240/A 240M, Type 304, 18-8 alloy.<br />
2.04 TOILET ACCESSORIES<br />
The following toilet accessories are to be furnished by the General Contactor through Twin City<br />
Hardware as part of the current Hardware Package.<br />
A. (MIR1) Framed Mirrors: 1/2” x 1/2" x 1/2", 20 gauge, stainless steel channel framed mirror with<br />
1/4" thick tempered mirror glass.<br />
1. Brey-Krause Model T-1024-36-SS.<br />
2. Sizes: 24” w. x 36” h.<br />
B. (MIR2) Framed Mirrors: 1/2” x 1/2" x 1/2", 20 gauge, stainless steel channel framed laminated<br />
mirror fabricated with an interlayer of 1/32′′ thick vinyl bonded between two 1/8′′ thick sheets of<br />
No 1 quality polished plate glass with back silver coated and hermetically sealed with a uniform<br />
coating of electrolytic copper plating.<br />
1. Bobrick Model B1659, laminated glass.<br />
2. Size: 24” w. x 60” h.<br />
C. (SND) Sanitary Napkin Disposal: Surface mounted, 22 gauge, 304 stainless steel cabinet<br />
with access door and removable waste liner.<br />
1. Bobrick Model B270.<br />
D. (GB) Grab Bars: Brey-Krause Manufacturing.<br />
1. (GB1): D-7812-05-SS 18” long.<br />
2. (GB2): D-7816-05-SS 36” long.<br />
3. (GB3): D-7815-05-SS 42” long.<br />
E. (DCS) Diaper Changing Station: Koala, Model KD-200, wall mounted, horizontal.<br />
2.05 OWNER FURNISHED TOILET ACCESSORIES<br />
The following items are furnished by the Owner for Contractor installation:<br />
A. (SDISP) Soap Dispensers: Ecolab, Digitizer Handsoap Dispenser.<br />
B. (PTD) Paper Towel Cabinet:<br />
1. Tork, Intuition Hand Towel Roll Dispenser.<br />
OR<br />
2. Tork, Elevation H1 Matic Towel Dispenser.<br />
C. (TPD) Toilet Paper Holder: Tork, Bath Tissue Jumbo Roll Twin Dispenser.<br />
PART 3 EXECUTION<br />
3.01 EXAMINATION<br />
A. Verification of Conditions:<br />
1. Prepared openings are sized and located in accordance with shop drawings.<br />
2. Reinforcement and anchoring devices are correct type and are located in accordance with<br />
shop drawings.<br />
B. Installer's Examination:<br />
1. Beginning construction activities of this section before unacceptable conditions have been<br />
corrected is prohibited.<br />
2. Beginning construction activities of this section indicates installer's acceptance of<br />
conditions.<br />
3.02 INSTALLATION<br />
A. Install toilet accessories in locations as indicated on Drawings.<br />
09-20-11 TOILET ACCESSORIES<br />
10810 -2
Change language