Buffalo Wild Wings

Buffalo Wild Wings
A. Manufacturer: Cooley Sign & Awning Products; 50 Esten Avenue, Pawtucket; RI, 02860.
Tel: 800-992-0072. www.cooleygroup.com.
B. Awning Fabric: Cooley “Weathertyte Lite” Acrylic Awning Fabric, Part # WTL-74DSBLK.
www.weathertyte.com
NOT USED – Reference exterior elevations for additional specifications
C. Awning Paint: Awnings to be painted with 8” x 8” yellow squares, in configuration as indicated
on Drawings and Exterior Sign Manual.
NOT USED – Reference exterior elevations for additional specifications
2.04 FABRICATION - FRAMING
A. Fit and shop assemble components in largest practical sizes, for delivery to site.
B. Fabricate components with joints tightly fitted and secured.
C. Exposed Fastenings: Unobtrusively located; consistent with design of component, except
where specifically noted otherwise.
D. Supply components required for anchorage of framing. Fabricate anchors and related
components of same material and finish as framing, except where specifically noted otherwise.
2.05 FABRICATION - COVERING
A. Manufacture covering in one piece wherever possible, sized and configured to suit framing.
B. Seams, as required, to be heat sealed not sewn in accordance with fabricators requirements.
C. Fabric Pattern Painting: 8” x 8” yellow squares.
1. Clean Weathertyte Lite awning fabric with Speed Prep Cleaner.
2. Apply base coat of 202 White with Flex Additive.
3. Apply 2 coats of PMS #116C Yellow topcoat with Flex Additive.
PART 3 EXECUTION
3.01 EXAMINATION
A. Verify that wall substrate anchors are acceptable and are ready to receive work.
3.02 PREPARATION
A. Supply items required to be embedded in masonry with setting templates, to appropriate
Sections.
3.03 INSTALLATION - FRAMING
A. Install in accordance with manufacturer's written instructions.
B. Install components plumb and level, accurately fitted, free from distortion or defects.
3.04 INSTALLATION - COVERING
A. Install covering over framing members, stretched taut without creases or folds.
B. Attach covering and fasten securely using fabricators staple-in system.
END OF SECTION
AWNINGS
10536 -2