Buffalo Wild Wings

Buffalo Wild Wings
B. Gypsum Board - All Types: Complying with applicable requirements of ASTM C 1396/C 1396M.
C. (GYB1) Standard Gypsum Board: Not Used
D. (GYB2) Mold and Moisture-Resistant Gypsum Board: With moisture and mold-resistant core
and surfaces to comply with ASTM D 3273.
1. Thickness: 5/8 inch.
2. Long Edges: Tapered.
3. Manufacturers and Products:
a. USG Corporation: Sheetrock Brand “Mold Tough” Gypsum Panels.
b. National Gypsum Company: XP Gypsum Board.
c. G-P Gypsum Corporation: “Mold-Guard Gypsum Board.
2.04 CEMENT BACKER BOARD
A. (GYB5) Cement Backer Board: ANSI A118.9, aggregated Portland cement panels with glass
fiber mesh embedded in front and back surfaces.
1. Thickness: 5/8 inch.
2. Manufacturers and Products:
a. USG Corporation: Durock.
b. National Gypsum: Permabase.
3. Location: At Kitchen and Toilet walls. Refer to Wall Types.
2.05 ACCESSORIES
A. Corner Beads: Galvanized steel.
B. Edge Trim: Vinyl tape style beads and as detailed.
C. Control Joint: Zinc, v-groove with tape flanges.
D. Joint Materials: ASTM C 475 and as recommended by gypsum board manufacturer for project
conditions.
1. Ready-mixed vinyl-based joint compound.
2. Chemical hardening type compound.
E. Joint Tape:
1. Standard Paper Tape: 2 inch wide.
a. Interior Gypsum Wallboard except specific products indicated below that require
fiberglass tape.
2. Fiberglass Tape: self-adhesive, glass-fiber mesh. Sheetrock Brand Fiberglass Drywall
Tape or comparable.
a. Interior Mold and Moisture Resistant Gypsum Board.
b. Cement Backer Board.
F. Screws: ASTM C 1002; self-piercing tapping type; cadmium-plated for exterior locations.
G. Anchorage to Substrate: Tie wire, nails, screws, and other metal supports, of type and size to
suit application; to rigidly secure materials in place.
PART 3 EXECUTION
3.01 EXAMINATION
A. Verify that project conditions are appropriate for work of this section to commence.
3.02 FRAMING INSTALLATION
A. Metal Framing: Comply with ASTM C 754 and manufacturer's instructions.
04-27-11 GYPSUM BOARD ASSEMBLIES
09260 -3