Buffalo Wild Wings

Buffalo Wild Wings
L. Floor Stops:
1. Manufacturer: Ives.
2.. Models:
a. 446PA28, US28, Aluminum.
b. FS18S, no finish.
M. Door Viewers: Solid Brass one way viewers.
1. Manufacturer: Ives.
2. Finish: US26D.
N. Kick Plates/Armor Plates: BHMA 156.6, 0.050" thick, BHMA 630, Type 304 stainless steel
plates.
1. Manufacturer: Hiawatha.
2. Finish: US32D.
O. Weatherstripping: Wool pile, continuous and replaceable; provide on all doors.
1. Manufacturer: Reese.
2. Finish: AL.
P. Sill Sweep Strips: Resilient seal type, of neoprene; provide on all exterior doors.
1. Manufacturer: Reese.
2. Finish: AL.
Q. Thresholds: ADA compliant extruded aluminum, one piece per door opening, ribbed surface;
provide on all exterior doors.
1. Manufacturer: Reese/Hiawatha.
2. Finish: AL.
R. Rain Drips: Mill aluminum drip cap continuous over full width of door frame head with 2-1/2”
projection.
1. Manufacturer: Reese.
2. Finish: AL.
2.04 DOOR SIGNAGE
A. Special Signage: When required, provide vinyl self-adhesive signage reading, "NOT AN EXIT".
Font shall be non-serif, 2 inches minimum in height, red letters on white background. Comply
with the requirements of the local code authority.
2.05 KEYING
A. Door Locks: Master keyed.
1. Include construction keying.
B. Supply keys in the following quantities:
1. Six master keys.
2. Two construction keys.
3. Two change keys for each lock.
4. Two removable core control keys.
PART 3 EXECUTION
3.01 EXAMINATION
A. Verify that doors and frames are ready to receive work and dimensions are as indicated on
mounting diagrams.
B. Verify that electric power is available to power operated devices and of the correct
characteristics.
09-14-11 DOOR HARDWARE
08710 -4