Buffalo Wild Wings
Buffalo Wild Wings
Buffalo Wild Wings
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Buffalo</strong> <strong>Wild</strong> <strong>Wings</strong><br />
2.03 DOOR HARDWARE COMPONENTS AND FINISHES<br />
A. Hinges: BHMA 156.1, butt type, ball bearing, non-removable pin on exterior outswinging doors.<br />
1. Manufacturer: PBB.<br />
2. Hinge Size: 1-3/4 inch doors / 4-1/2 inches x 4-1/2 inches.<br />
3. Spring Hinge: Self-closing hinges, BHMA 156.17, 4-1/2 inches x 4-1/2 inches.<br />
4. Finish: US26D for interior doors and US32D for exterior doors.<br />
B. Lock and Latch Sets: Cylindrical Locks, BHMA A156.2, Grade 1, prepared to accept “Insta-Key”<br />
interchangeable cores.<br />
1. Manufacturer: Schlage; ND Series.<br />
2. Lever Handle Trim Design: Schlage “Rhodes”.<br />
3. Finish: US26D.<br />
4. Manufacturer: Schlage; AL Series.<br />
5. Lever Handle Trim Design: Schlage “Saturn”.<br />
6. Finish: US26D.<br />
C. Cylinders: BHMA 156.2, Grade 1, prepared to accept “Insta-Key” interchangeable cores.<br />
1. Manufacturer: Schlage.<br />
2. Finish: US26D.<br />
D. Exit Alarm Locks: BMHA 156.3, Grade 1.<br />
1. Manufacturer: Von Duprin; Guard – X, Series 2670.<br />
2. Finish: US28.<br />
E. Panic Exit Devices: BMHA 156.3, Grade 1. Rim exit device with exit alarm, weatherized.<br />
1. Manufacturer: Detex; Value Series, V40.<br />
2. Finish: Black Anodized Aluminum.<br />
F. Push/Pull Sets: BHMA 156.6.<br />
1. Manufacturer: Hiawatha.<br />
2. Finish: US32D.<br />
G. Closers: Universal mounting and multi-sized modern surface type with full cover, sized for<br />
individual door sizes and locations, (unless other types are required by special conditions.<br />
1. Manufacturer: LCN.<br />
2. Provide 110 degree arm.<br />
3. Provide with cushion stop for exterior doors.<br />
4. Finish: AL.<br />
5. Maximum force to operate doors shall not exceed 8.5 pounds for exterior doors and 5<br />
pounds for interior doors. Fire rated doors to be set to minimum operating force to allow<br />
positive latching when closed.<br />
H. Flush Bolts: BHMA 156.16, manual flush bolt, 12 inch long rod length.<br />
1. Manufacturer: Ives.<br />
2. Finish: US26D.<br />
I. Double Coat Hooks: Brushed aluminum double wardrobe hook.<br />
1. Manufacturer: Ives.<br />
2. Finish: US92, aluminum clear coated.<br />
J. Hinge Pin Stops:<br />
1. Manufacturer: Ives.<br />
2. Finish: US15, satin nickel plated.<br />
K. Wall Stops: Concave design, with dry wall anchor.<br />
1. Manufacturer: Don-Jo Manufacturing.<br />
2. Finish: US32D.<br />
09-14-11 DOOR HARDWARE<br />
08710 -3
Change language