Buffalo Wild Wings

Buffalo Wild Wings
1.08 WARRANTY
A. See Section 01700 - Execution Requirements for additional warranty requirements.
B. Provide warranty for the following term:
1. Interior Doors: Life of installation.
C. Include coverage for delamination of veneer, warping beyond specified installation tolerances,
defective materials, and telegraphing core construction.
PART 2 PRODUCTS
2.01 WOOD DOOR SUPPLIER
A. Wood doors are to be furnished by the General Contactor through Twin City Hardware as part
of the current BWW Door and Hardware Package.
2.02 MANUFACTURERS
Twin City Hardware Company
723 Hadley Avenue North
Oakdale, MN 55128
651-735-2200
A. Wood Veneer Faced Doors:
1. Lynden Door Inc: www.lyndendoor.com
2.03 DOOR CONSTRUCTION, GENERAL
A. WDMA I.S.1-A Performance Grade: Heavy Duty.
B. Particleboard-Core Doors:
1. Particleboard: ANSI A208.1, Grade LD-2, made with binder containing no ureaformaldehyde
resin.
2.04 VENEERED-FACED DOORS FOR TRANSPARENT FINISH
A. (Wood Doors): Interior 1-3/4” Solid-Core Doors:
1. Grade: Premium, with Grade A faces.
2. Species: Select White Maple.
3. Cut: Plain sliced (flat sliced).
4. Match between Veneer Leaves: Book match.
5. Assembly of Veneer Leaves on Door Faces: Running match.
6. Exposed Vertical Edges: Same species as faces.
7. Core: Particleboard.
8. Construction: 5 or 7 ply. Stiles and rails are bonded to core, then entire unit abrasive
planed before veneering.
2.05 DOOR CONSTRUCTION
A. Fabricate doors in accordance with door quality standard specified.
B. Cores Constructed with Stiles and Rails: Provide solid blocks at lock edge for hardware
reinforcement.
C. Fit door edge trim to edge of stiles after applying veneer facing.
D. Factory machine doors for hardware other than surface-mounted hardware, in accordance with
hardware requirements and dimensions.
E. Factory fit doors for frame opening dimensions identified on shop drawings, with edge
clearances in accordance with specified quality standard. Doors to be field finished.
04-27-11 FLUSH WOOD DOORS
08211 -2