Buffalo Wild Wings
Buffalo Wild Wings
Buffalo Wild Wings
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Buffalo</strong> <strong>Wild</strong> <strong>Wings</strong><br />
C. Interior Frames: Fabricate from cold rolled steel sheet assembled with a mechanical interlock<br />
joint, face miter seam “closed and tight”. Weld face seam of frame (T-2). Grind and dress<br />
smooth weld area. Apply zinc rich primer over grinding area.<br />
1. Sheet Thickness: 16 gauge.<br />
D. Traffic Doors Frames: Fabricate from cold rolled steel sheet assembled with a mechanical<br />
interlock joint, face miter seam “closed and tight”. Weld face seam of frame (T-2). Grind and<br />
dress smooth weld area. Apply zinc rich primer over grinding area.<br />
1. Sheet Thickness: 14 gauge.<br />
2. Configuration: Fabricate without stop and with added reinforcement for traffic door<br />
hardware.<br />
E. Frame Finish: Shop prime for field painting under Section 09900.<br />
F. Finished work to be smooth and free from warps and buckles.<br />
G. Silencers: Glynn-Johnson, 64 Silencer. Furnish 3 at single door strike jambs, 2 at head of pair<br />
doors.<br />
H. Provide floor clips for frames. Provide jamb anchors spaced not over 30" on center for frames.<br />
Furnish temporary spreader bars and bracing.<br />
2.05 HOLLOW METAL DOORS<br />
A. Exterior Flush Steel Doors: Comply with ANSI/SDI A250.8, Level III, Model 2,Extra Heavy<br />
Duty, seamless design, Full Flush Door.<br />
1. Face Sheet Thickness: 16 gauge.<br />
2. Thickness: 1-3/4 inch.<br />
3. Core: Polystyrene.<br />
Note: Provide Polystyrene core for exterior doors and Mechanical Room door, (Type 6).<br />
5. Fabricate with watertight top closure and construct to receive weatherstripping as specified<br />
under Section 08700.<br />
6. Material and Finish: Zinc-alloy-iron coating (galvannealed) to a minimum coating weight of<br />
A60 to comply with ASTM A 653. Shop prime for field painting under Section 09900.<br />
B. Interior Flush Steel Doors: Comply with ANSI/SDI A250.8, Level II, Model 2, Heavy Duty,<br />
seamless design, Full Flush Doors.<br />
1. Face Sheet: 16 gauge.<br />
2. Thickness: 1-3/4 inch.<br />
3. Core: Impregnated kraft honeycomb core.<br />
4. Material and Finish: Cold rolled steel sheet complying with ASTM A 1008. Shop prime for<br />
field painting under Section 09900.<br />
5. Glazing Stops: Construct removable glazing stops of 16 gauge steel. Factory fit and install<br />
stops. Form neat hairline joints. Install stops using screws not over 16" on center with at<br />
least two screws per piece.<br />
2.06 LOUVERS<br />
A. Metal Louvers: Provide manufacturers standard 12” high by 18” wide metal louver in Office<br />
door, in location as indicated on Drawings.<br />
1. Shop prime louver for field painting under Section 09900.<br />
2.07 GLAZING<br />
A (GL5): One-Way Mirror Glass 1/4 inch thick; ASTM C1036, Type I, Class 2, q3 quality, Style B,<br />
clear tempered glass with a reflective coating one side.<br />
1. Provide glass for Office door in location as indicated on Drawings.<br />
04-27-11 HOLLOW METAL DOORS AND FRAMES<br />
08110 -3
Change language