Buffalo Wild Wings

(SLNT6): Low modulus Silicone Sealant, use for:
a. Air barrier perimeter.
b. Exterior sheet metal joints.
(SLNT7): Ultra-Low Modulus Silicone Sealant, use for:
a. Perimeter and internal joints in EIFS System.
DIVISION 8 - DOORS AND WINDOWS
SECTION 08110 – HOLLOW METAL DOORS AND FRAMES
Indicated on Drawings as:
(HM Frames): 14 gauge galvanized for Exterior Frames. 14 gauge for Traffic Door
Frames. 16 gauge for Interior Frames.
(HM Doors): 16 gauge galvanized with polystyrene core for Exterior Doors. 16 gauge
with honeycomb core for Interior Doors.
SECTION 08211 - FLUSH WOOD DOORS
Indicated on Drawings as:
(Wood Doors): Interior 1-3/4” Solid-Core Doors with Plain Sliced, Select White Maple
veneers.
Finish (PS19): Transparent finished doors field finished under Section 09900 - Paints
and Coatings.
SECTION 08310 - ACCESS DOORS AND PANELS
Indicated on Drawings as:
(AP) Access Panel: Access panels for drywall, EIFS and composite panel soffit locations.
SECTION 08380 - TRAFFIC DOORS
Indicated on Drawings as:
(TD): Chase Model # SC-3018, Plastic laminate both sides, 18” s.s. impact plate
and 9” x 14” acrylic vision panel.
Plastic Laminate Colors:
Black: Formica Black 909-58, Dining/Public side of door.
White: Formica White 949-58, Kitchen side of door.
SECTION 08410 – METAL FRAMED STOREFRONTS
Indicated on Drawings as:
(Aluminum Storefront & Window Framing): 2” x 4-1/2”, thermally broken, center glazed
to accept 1/4" and 1” insulated glass. Clear Anodized Finish.
(Aluminum Doors): 1-3/4 thick, medium stile aluminum doors.
Aluminum Door Hardware: All Hardware specified except Cylinders and Door Stops.
Material Identification Codes List 11-01-11
00011-7