Buffalo Wild Wings

SECTION 07424 - ALUMINUM COMPOSITE PANEL SYSTEM
Indicated on Drawings as:
(Aluminum Composite Panels): 4mm composite panel with 3-coat, Kynar finish.
Color: Una-Clad “Silver Metallic”. Rout and Return wet
joint system.
SECTION 07535 – MECHANICALLY ATTACHED MEMBRANE ROOFING
Indicated on Drawings as
(Membrane Roofing System): Mechanically attached thermoplastic sheet, .040 inch
thick. FM Class A and I-60 wind resistance.
SECTION 07620 - SHEET METAL FLASHING AND TRIM
Indicated on Drawings as: (SHT MET#)
(SHT MET1): Prefinished galvanized steel, kynar coated. Color: Una-Clad “Silver Metallic”.
(SHT MET2): Standard galvanized flashing.
(Reglets): Manufactured reglets, surface mounted and recessed.
SECTION 07720 - ROOF ACCESSORIES
Indicated on Drawings as:
(Roof Hatch): Roof hatch for vertical ladder locations (2'-6" by 3'-0"), Bilco Type S
Roof Hatch.
SECTION 07900 - JOINT SEALERS
Indicated on Drawings as: (SLNT)
(SLNT1): General Purpose Exterior Sealant, 1 part, polyurethane.
(SLNT2): General Purpose Interior Sealant, acrylic.
(SLNT3): Sanitary/Tile Sealant, 1 part , mildew resistant silicone.
(SLNT4): Concrete Paving Joint Sealant, 2 part, self-leveling polyurethane for traffic.
(SLNT5): Butyl Sealant.
(SLNT6): Low modulus Silicone Sealant, 1 part, general purpose silicone.
(SLNT7): Ultra-Low Modulus Silicone Sealant, 1 part, silicone.
Sealant Schedule - Sealant types will be scheduled within the project manual as follows:
(SLNT1): General Purpose Exterior Sealant, use for:
a. Control, expansion, and soft joints in masonry.
b. Joints between concrete and other materials.
c. Joints between metal frames and other materials.
d. Other exterior joints for which no other sealant is indicated.
(SLNT2): General Purpose Interior Sealant, use for:
a. Interior wall and ceiling control joints.
b. Joints between door and window frames and wall surfaces.
c. Other interior joints for which no other type of sealant is indicated.
(SLNT3): Sanitary/Tile Sealant, use for:
a. Joints between plumbing fixtures and floor and wall surfaces.
b. Joints between kitchen and bath countertops and wall surfaces.
c. Control joints in tile installations in toilet rooms and kitchen.
(SLNT4): Concrete Paving Joint Sealant use for:
a. Joints in concrete sidewalks and vehicular paving.
(SLNT5): Butyl Sealant, use for:
a. Seam sealant for masonry flashing.
b. Bedding sealant for thresholds and sills.
Material Identification Codes List 11-01-11
00011-6