Buffalo Wild Wings

Buffalo Wild Wings
PART 1 GENERAL
1.01 SECTION INCLUDES
SECTION 07160 – BITUMINOUS DAMPPROOFING
A. Cold-applied, emulsified-asphalt dampproofing.
B. Protection board.
1.02 RELATED SECTIONS
A. Section 03300 – Cast-in-place Concrete.
B. Section 04810 – Unit Masonry Assemblies.
1.03 REFERENCES
A. American Society for Testing and Materials (ASTM):
1. ASTM C 272: Test Method for Water Absorption of Core Materials for Structural.
2. ASTM D 1227: Specification for Emulsified Asphalt used as a Protective Coating for
Roofing.
3. ASTM D 1621: Test Method for Compressive Properties of Rigid Cellular Plastics.
4. ASTM D 1668: Specification for Glass Fabrics (Woven and Treated) for Roofing and
Waterproofing.
B. National Roofing Contractors Association (NRCA):
1. Waterproofing Manual.
1.04 SUBMITTALS
A. See Section 01300 - Administrative Requirements, for submittal procedures.
B. Product Data: Include recommendations for method of application, primer, number of coats,
coverage or thickness and reinforcing. Submit manufacturer’s technical bulletins and MSDS.
1.05 QUALITY ASSURANCE
A. Source Limitations: Obtain primary dampproofing materials and primers through one source
from a single manufacturer. Provide secondary materials recommended by manufacturer of
primary materials.
1.06 PROJECT CONDITIONS
A. Weather Limitations: Proceed with installation only when existing and forecasted weather
conditions permit dampproofing to be performed according to manufacturers' written
instructions.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. Acceptable Manufacturers for Dampproofing:
1. BASF Building Systems.
2. Karnak Corporation.
3. W.R. Meadows, Inc.
4. Tamms Industries, Inc.
04-27-11 BITUMINOUS DAMPPROOFING
07160 -1