Small Tamping Machine MINIMA 1

Small Tamping Machine MINIMA 1
Economical Lightweight Tamping Machine for the
mechanised maintenance of small construction sites

MINIMA 1 Small Tamping Machine
For the mechanised maintenance of small construction sites
• High quality asynchronous pressure vibration tamping
• Compact tamping unit between the axles
•
The edges of the tamping tine pressure plates are
reinforced by build-up welding using hard electrodes
• Four tamping tines that may be swivelled independently
• May be loaded onto lorry
•
The operator’s seat with all the operating elements for
work and travel is located directly behind the tamping unit
TECHNICAL DATA
Weight
Length
Width
Height
Wheelbase
Wheel diameter
Engine output
Travelling speed
3 t
2700 mm
2600 mm
2000 mm
1500 mm
400 mm
35 kW (47 HP) at 2300 rpm
15 kph in both directions,
infinitely adjustable
• Hydrostatic drive by hydraulic engine via roller chain
on the rear wheels
• Slowing down of the machine via the hydrostatic drive,
mechanical parking brake
• Linear control ensures precise motion sequences of
all hydraulic work units
• Hydraulic oil tank equipped with suction and backflow filter
•
Hydraulic lifting mechanism for lifting and turning
the machine
• Two rail clamping tongs engage under the rail head
during the tamping process
SPECIAL EQUIPMENT
• Equipment for tamping grooved rails
• Track Gauge and Superelevation Measuring Device
ROBEL 83.37
• Obstructionless track jack 47.14
Dimensions and weights approximated. We reserve the right to modify in the course of technical development. Copyright secured.
MINIMA 1/04.06/E
ROBEL Bahnbaumaschinen GmbH · Industriestraße 31 · 83395 Freilassing · Germany
Telefon: +49 (0) 8654/609-0 · Telefax: +49 (0) 8654/609-445
e-mail: info@robel.info · Internet: www.robel.info