Hydraulic Track Lifting Machine HGR 47.230
Hydraulic Track Lifting Machine HGR 47.230
Hydraulic Track Lifting Machine HGR 47.230
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Hydraulic</strong> <strong>Track</strong> <strong>Lifting</strong> <strong>Machine</strong> <strong>HGR</strong> <strong>47.230</strong><br />
<strong>Hydraulic</strong> track lifting machine<br />
with slewing device
<strong>HGR</strong> <strong>47.230</strong> <strong>Hydraulic</strong> track lifting machine<br />
• Areas of application:<br />
- Tamping of rails<br />
- Maintenance of rail joints<br />
- <strong>Lifting</strong> works at switches<br />
- <strong>Lifting</strong> rails to exchange the pads<br />
- <strong>Lifting</strong> and slewing track panels<br />
- Slewing track panels in one work process<br />
• Welded chassis made from steel profiles<br />
• Powered by a noise-insulated diesel engine<br />
• <strong>Lifting</strong> cylinder with support plates;<br />
safety valves prevent the sudden lowering of the load<br />
• Double action slewing cylinder<br />
• Roller-bearing rollers, maintenance-free<br />
• Hydrostatic drive with built-in oil engine and drive<br />
shaft acting on both wheels of the rear axle<br />
TECHNICAL DATA<br />
Drive<br />
Output<br />
Fuel capacity<br />
air-cooled one cylinder four stroke diesel engine;<br />
Noise insulated version „Silent Pac“<br />
7.2 kW (9.8 PS) at 2000 rpm<br />
10 l<br />
Working capacity:<br />
<strong>Lifting</strong> force 200 kN at 150 bar (20 t)<br />
<strong>Lifting</strong> height<br />
continuous 0 to 900 mm<br />
Slewing force 42.5 kN at 150 bar (20 t)<br />
Slewing range<br />
continuous 0 to 230 mm<br />
<strong>Track</strong> gauge<br />
1435 mm<br />
Speed<br />
continuous, in both directions<br />
0 to 13 kph<br />
Dimensions Length / width / height 1700 / 3120 / 1950<br />
Weight (without additional equipment)<br />
On request at additional charge<br />
1450 kg<br />
other track gauges, roofing, tarpaulin, etc.<br />
• Both rail clamps, hydraulically operated, grip the<br />
rail head automatically when lowered onto it and<br />
open when they are lifted<br />
• Flexible, pluggable rubber wheels enable the<br />
turning and off-tracking of the device at crossings<br />
• Water level for the precise levelling of the track<br />
Dimensions and weights approximated. We reserve the right to modify in the course of technical development. Copyright secured.<br />
43.32/04.06/E<br />
ROBEL Bahnbaumaschinen GmbH · Industriestraße 31 · 83395 Freilassing · Germany<br />
Tel: +49 (0) 8654/609-0 · Fax: +49 (0) 8654/609-445<br />
E-mail: info@robel.info · Internet: www.robel.info