quick and easy mounting safe and ergonomic Rail Clamp 68.05
quick and easy mounting safe and ergonomic Rail Clamp 68.05
quick and easy mounting safe and ergonomic Rail Clamp 68.05
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>quick</strong> <strong>and</strong> <strong>easy</strong> <strong>mounting</strong><br />
<strong>safe</strong> <strong>and</strong> <strong>ergonomic</strong><br />
<strong>Rail</strong> <strong>Clamp</strong> <strong>68.05</strong>
<strong>68.05</strong> <strong>Rail</strong> <strong>Clamp</strong><br />
Nut locking device with spring ring (up to 80 km/h)<br />
Nut locking device with <strong>safe</strong>ty locking flap <strong>and</strong> additional <strong>safe</strong>ty locking bar<br />
(up to 160 km/h)<br />
Precise connection of two rail ends<br />
• The rail clamp is mounted directly at the rail joint by using<br />
two flat fish plates (to be provided by the customer)<br />
• The rail clamp guarantees that e.g. ballast regulators <strong>and</strong><br />
tamping machines can work unhindered. The inner<br />
distance of the tamping tines or the width of the ballast<br />
channel of the ballast plough must be larger than 300 mm<br />
• In accordance with the <strong>mounting</strong> regulations we offer the<br />
design with strain washer <strong>and</strong> alternatively the design with<br />
<strong>safe</strong>ty locking flap <strong>and</strong> <strong>safe</strong>ty locking bar<br />
• Compact construction<br />
•<br />
•<br />
Minimum ballast excavation<br />
St<strong>and</strong>ard design for rails S49 up to UIC 60 as well as all<br />
similar rail profiles<br />
TECHNICAL DATA<br />
Tightening torque of nut<br />
DB approval for tracks under repair:<br />
Nut locking device with strain washer<br />
Nut locking device with <strong>safe</strong>ty locking<br />
flap <strong>and</strong> <strong>safe</strong>ty locking bar<br />
Dimensions L / W / H<br />
Total weight<br />
300 Nm<br />
up to 80 km/h<br />
up to 160 km/h<br />
300 / 160 / 145 mm<br />
18 kg<br />
Dimensions <strong>and</strong> weights approximated. We reserve the right to modify in the course of technical development. Copyright secured.<br />
<strong>68.05</strong>/10.06/E<br />
ROBEL Bahnbaumaschinen GmbH · Industriestraße 31 · 83395 Freilassing · Germany<br />
Telefon: +49 (0) 8654/609-0 · Telefax: +49 (0) 8654/609-445<br />
e-mail: info@robel.info · Internet: www.robel.info
Change language