BOOTS FOR FIRE FIGHTERS - North Fire
BOOTS FOR FIRE FIGHTERS - North Fire BOOTS FOR FIRE FIGHTERS - North Fire
BOOTS FOR FIRE According to EN 15090 (EN ISO 20344 and EN ISO 20345) The basic requirements – perfect protection and optimum fit Heat, cold, flames, water, oil, petrol (gasoline), chemicals, electricity and sharp objects have to be kept away from the feet of the fire men as well as safe hold has to be ensured. Ergonomics, optimum freedom of movement, maximum shock-absorbing properties and high level of wearer comfort are united by the ROSENBAUER boots. Test it and you will be delighted! High quality materials only: • Hydrophobic waterproof leather • Impregnated seams • Foamed material padding • Heat-resistant 3M reflective stripes, silver • Nail-proof Nitrile air-cushion sole • Replaceable, moisture-regulating and washable sole inlay • Steel toe-cap and cover of rubber Some Tests from EN 15090 (EN ISO 20344/EN ISO 20345) • Compression resistance and impact resistance of the toe protection • Penetration resistance: may not be less than 1100 N • Electrical resistance of antistatic footwear: 100kΩ - 1000MΩ • Leak proofness • Tear strength of the tongue: may not be less than 36 N for leather • Abrasion resistance outsole: volume reduction may not be more than 250 mm 3 • Flexing resistance of the sole: 30.000 flexing cycles • Water vapour permeability (upper): at least 0,8 mg/(cm 2 . h) • Water absorption and water penetration: water absorption within the first 60 min. ≤ 30 % - no water penetration Test of tear strength Meanings of symbols: HI3: Insulation against heat level of performance 3 at 250˚C/40min CI: cold insulation HRO: resistance to hot contact During the development of the boots, some other extreme long-term tests than mentioned in the EN ISO 20345 were made – all with best results! Test of leak proofness in the walk simulator
IGHTERS TORNADO Lace-up boot Optimum fit and quick entry TORNADO combines the advantages of a Lace-up boot with the ease of quick entry of a Slip-on boot. You only have to lace up the boots once, the heat-resistant boot-lace fixing maintains the tension from then on. The additional heavy duty zipper enables the quick entry and exit for daily use. Quality features that convince … • SYMPATEX® membrane with highgrade laminate lining for water resistance and breathable climate • Black tanned hydrophobic waterproofed leather • Padded leg and edge-of-leg zone • Nail-proof Nitrile air-cushion safety sole, rubber toe-cap • Moisture-regulating removable and washable sole inlay • Easy-to-use and durable lace-zippersystem with zipper • Optimum fit because of best possible lacing of Nomex® bootlace • Single-piece, cushioned tongue, zipper with flap and loop for fixing on the tongue • Seams made of heat-resistant red coloured sewing thread • Silver reflective materials for enhanced safety Height of boot: 260 mm (Size 42) without sole Size: 38 – 48, width 10 Other widths on request Order No. 143900 Water Body moisture Air Upper leather SYMPATEX membrane Lining Laces fastened with heat-resistant polyamide with padded reinforcing on the inside Padded leg and edge-of-leg zone Leather strap with textile reinforcing Reflecting knurling Zip fastened on the tongue on the inside Laces fastened with heat-resistant polyamide with padded reinforcing on the inside Rubber toe-cap Heat-resistant 3M reflective stripes, silver Carefully padded ankle zone Steel toe-cap Joint-supportive heel insert Nitrile air-cushion sole with edge pulled up on the sides Moisture-regulating removable and washable insert sole inlay Leather insole, antibacterial, moisture-regulatin sealing insole Steel plated midsole Metal band for electric deflection
- Page 1: BOOTS FOR FIRE FIGHTERS According t
- Page 5 and 6: TORNADO NOW with integrated CHAIN-S
- Page 7 and 8: ACCESSORIES for TORNADO and AUSTRIA
<strong>BOOTS</strong> <strong>FOR</strong> <strong>FIRE</strong><br />
According to EN 15090 (EN ISO 20344 and EN ISO 20345)<br />
The basic requirements – perfect<br />
protection and optimum fit<br />
Heat, cold, flames, water, oil, petrol<br />
(gasoline), chemicals, electricity and<br />
sharp objects have to be kept away from<br />
the feet of the fire men as well as safe<br />
hold has to be ensured.<br />
Ergonomics, optimum freedom of<br />
movement, maximum shock-absorbing<br />
properties and high level of wearer<br />
comfort are united by the ROSENBAUER<br />
boots. Test it and you will be delighted!<br />
High quality materials only:<br />
• Hydrophobic waterproof leather<br />
• Impregnated seams<br />
• Foamed material padding<br />
• Heat-resistant 3M reflective stripes,<br />
silver<br />
• Nail-proof Nitrile air-cushion sole<br />
• Replaceable, moisture-regulating and<br />
washable sole inlay<br />
• Steel toe-cap and cover of rubber<br />
Some Tests from EN 15090 (EN ISO 20344/EN ISO 20345)<br />
• Compression resistance and impact resistance of the toe protection<br />
• Penetration resistance: may not be less than 1100 N<br />
• Electrical resistance of antistatic footwear: 100kΩ - 1000MΩ<br />
• Leak proofness<br />
• Tear strength of the tongue: may not be less than 36 N for leather<br />
• Abrasion resistance outsole: volume reduction may not be more than 250 mm 3<br />
• Flexing resistance of the sole: 30.000 flexing cycles<br />
• Water vapour permeability (upper): at least 0,8 mg/(cm 2 . h)<br />
• Water absorption and water penetration: water absorption within the first 60 min.<br />
≤ 30 % - no water penetration<br />
Test of tear strength<br />
Meanings of symbols:<br />
HI3: Insulation against heat<br />
level of performance 3<br />
at 250˚C/40min<br />
CI: cold insulation<br />
HRO: resistance to hot contact<br />
During the development of the boots,<br />
some other extreme long-term tests than<br />
mentioned<br />
in the EN ISO 20345 were made – all<br />
with best results!<br />
Test of leak proofness in the walk simulator
Change language