iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Related Features
Hardware
MOH (Music-On-Hold)
Intercom Call (ICM Call)
Hold Recall
LIP Phone
2.38 INTERCOM CALLER CONTROLLED ICM SIGNALING
Description
A user can change the signaling mode of an Intercom call from Tone ring to Voice announce, or
Voice announce to Tone ring.
Operation
LIP Phone
To change the ICM Signaling mode:
1. Place intercom call.
2. Dial ‘#’, ICM Signaling mode will change from Voice announce to Tone ring or Tone ring to
Voice announce.
SLT
To change the ICM Signaling mode:
1. Place intercom call as normal.
2. Dial ‘#’, ICM Signaling mode will change from Voice announce to Tone ring, or Tone ring to
Voice announce.
Conditions
1. If the signaling mode is changed, the call is not subject to Call Forward, No Answer.
2. The signaling mode for a specific Intercom call can only be changed once and can not be
changed back to the original signaling mode.
3. Changing the signaling mode does not affect privacy at the called station.
Programming
Related Features
Hardware
Intercom Answer Mode
2-69