Brokmeier Veröffentlichungsliste Januar 2013
Brokmeier Veröffentlichungsliste Januar 2013
Brokmeier Veröffentlichungsliste Januar 2013
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
(2011)<br />
313. H.-G. <strong>Brokmeier</strong>, W. M. Gan, C. Randau, J. Rebelo-Kornmeier , M. Hofmann: Texture<br />
analysis at neutron diffractometer STRESS-SPEC, Nuclear Instruments and Methods in<br />
Physics A 642 (2011) 87-92.<br />
312. H.-G. <strong>Brokmeier</strong>: Non-destructive evaluation of strain-stress and texture in materials<br />
science by neutrons and hard X-rays, Procedia Engineering 10 (2011) 1657-1662.<br />
311. H.-G. <strong>Brokmeier</strong>, M. Jiang, E. Maawad, B. Schwebke, T. Lippmann: Texture development<br />
of Mg AZ80 after cyclic loading atb 80% yield stress, Materials Science Forum 690 (2011)<br />
198-201.<br />
310. E. Mawaad, H.-G. <strong>Brokmeier</strong>, L. Wagner, Y. Sano, Ch. Genzel: Investigation on the<br />
surface and near-surface characteristics of Ti-2.5Cu after various mechanical surface<br />
treatments, J Surface and Coatings Technology 205 (2011) 3644-3650.<br />
309. C. Randau, U. Garbe, H.-G. <strong>Brokmeier</strong>: StressTextureCalculator: a software tool to extract<br />
texture, strain and microstructure information from area-detector measurements, J. Appl.<br />
Cryst. 44 (2011) 641-646.<br />
308. C-G. Oertel, R. Schaarschuch, G.H. Cao, H.N. Tian, J. Freudenberger, H.-G. <strong>Brokmeier</strong>, W.<br />
Skrotzki: Effect of martensitic phase transformation on the ductility of polycrystalline YCu,<br />
Scripta Materialia 65 (2011) 779-782.<br />
307. K. Zay, E. Maawad, H.-G. <strong>Brokmeier</strong>, L. Wagner and Ch. Genzel: Influence of mechanical<br />
surface treatments on the high cycle fatigue performance of TIMETAL 54M, Materials<br />
Science & Engineering A 528 (2011) 2554-2558.<br />
306. K.K. Deng, X.J. Wang, W.M. Gan, Y.W. Wu, K.B. Nie, K.Wu, M.Y.Zheng, H.G.<br />
<strong>Brokmeier</strong>: Isothermal forging of AZ91 reinforced with 10 vol.% silicon carbon particles,<br />
Materials Science and Engineering A 528 (2011) 1707-1712.<br />
305. L.B. Tong, M.Y. Zheng, S.W. Xu, S. Kamado, Y.Z. Du, X.S. Hu, K. Wu, W.M. Gan, H.G.<br />
<strong>Brokmeier</strong>, G.J. Wang, X.Y. Lv: Effect of Mn addition on microstructure, texture and<br />
mechanical properties of Mg-Zn-Ca alloy, Materials Science and Engineering A 528 (2011)<br />
3741-3746.<br />
304. A. Zi, C. Randau, H.-G. <strong>Brokmeier</strong>, H. Palkowski: Texture and mechanical properties of<br />
strip cats and hot rolled magnesium AZ31, International Journal of Materials Research 102<br />
(2011) 168-172.<br />
(2010)<br />
303. H.-G. <strong>Brokmeier</strong>: Neutron and Photon Research for Texture and Stress Characterisation of<br />
Advanced Materials, Adv. Materials Research Vol. 146-147, 2010, pp. 891-894.<br />
302. H.-G. <strong>Brokmeier</strong>, H. Chang, W.M. Gan, M.Y. Zheng, K. Wu: Texture development of ARB<br />
processed Mg/Al multilayers, J. Phys.: Conf. Ser. 240 (2010) 012125<br />
301. S. Yi, H.-G. <strong>Brokmeier</strong>, D. Letzig: Microstructural evolution during annealing of extruded<br />
AZ31 magnesium alloy, J. of Alloys and Compounds Vol. 506 (2010) 364-371.<br />
300. H.-G. <strong>Brokmeier</strong>, C. Randau, W. Tekouo, M. Hofmann, W. Gan, M. Müller, A. Schreyer,<br />
W. Petry: The Robot Concept at STRESS-SPEC for the Characterisation or Semi-Finished<br />
Products,, Materials Science Forum Vol. 652, 197-201, 2010.
Change language