Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SCREWDRIVERS</strong> <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
132
4<br />
<strong>SCREWDRIVERS</strong> <strong>WRENCHES</strong><br />
<strong>AND</strong> <strong>KEYS</strong><br />
Screwdrivers with<br />
plastic handle<br />
Interchangeable blade screwdrivers<br />
Screwdrivers with<br />
wooden handle<br />
Screwholding screwdrivers<br />
Offset screwdrivers<br />
Hexagon keys<br />
Hexagon keys with handgrip<br />
134<br />
142<br />
145<br />
145<br />
146<br />
147<br />
152<br />
Male hexagon key T-drivers<br />
154<br />
Swivel head male hexagon<br />
key T-drivers<br />
Hexagon socket<br />
spinner wrenches<br />
Insert bits<br />
Adapters and bit holders<br />
Bit holders with handgrip<br />
Impact screwdrivers<br />
and accessories<br />
155<br />
156<br />
158<br />
161<br />
163<br />
165<br />
133
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
LOGIC ADV`: THE MOST TECHNOLOGICALLY ADVANCED<br />
PROFESSIONAL SCREWDRIVER<br />
BIMATERIAL ERGONOMIC GRIP<br />
1. Round shaped area with antislipping<br />
finish to ensure a firm grip.<br />
2. Concave profile area providing an<br />
anatomical thumb grip.<br />
3. Triangular section area made in soft<br />
material to offer a perfect hand grip<br />
thus preventing slippage and<br />
enhancing user comfort. Its convex<br />
ADVANCED<br />
profile allows for an excellent fit in<br />
the user’s hand.<br />
4. Domed end made up of round<br />
shaped sections, constructed from<br />
hard material with a smooth finish to<br />
allow the hand to slide freely when<br />
pushing.<br />
Slot-head PHILLIPS` POZIDRIV`-SUPADRIV` -Tamper Resistant`<br />
! " § $<br />
ATRULYEXTENSIVERANGE<br />
Being designed for the professional market, the<br />
Logic ADV` comes in a series of models suitable to<br />
meet any and all user needs.<br />
The USAG range is very extensive and can satisfy<br />
all requirements.<br />
The various models in the Logic ADV` range of<br />
screwdrivers are differentiated by means of a<br />
colour-coded ring placed on the handle, thus<br />
enabling the user to quickly locate the model<br />
required.<br />
327 m<br />
Logic ADV`<br />
screwdrivers for slothead<br />
screws<br />
− Bimaterial ergonomic grip<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
axbxc<br />
mm<br />
d<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0,4x2,5x50 2,5 150 24<br />
0,4x2,5x75 2,5 175 25<br />
0,5x3x75 3 175 27<br />
0,5x3x100 3 200 30<br />
0,8x4x100 4 212 57<br />
0,8x4x125 4 237 60<br />
1x5,5x125 5 237 70<br />
1x5,5x150 5 262 73<br />
1,2x6,5x125 6 245 105<br />
1,2x6,5x150 6 270 109<br />
1,6x8x150 7 270 125<br />
1,6x8x175 7 295 133<br />
1,6x10x200 8 320 170<br />
327 SE6 m<br />
Set of six screwdrivers<br />
(327/0,4x2,5x50-0,5x3x75-0,8x4x100-<br />
1x5,5x125-1,2x6,5x150-1,6x8x175) 420 gr<br />
327 E m<br />
Logic ADV` screwdrivers<br />
for slot-head screws<br />
− Model with hexagonal<br />
driver<br />
− Bimaterial ergonomic grip<br />
− Chrome Vanadium steel<br />
blade<br />
− Chrome plated finish with<br />
burnished tip<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
axbxc<br />
mm<br />
d<br />
ø mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
1,2x6,5x150 6 10 270 114<br />
1,2x8x150 7 11 270 134<br />
1,6x8x175 8 12 295 164<br />
1,6x10x200 9 14 325 227<br />
2x12x250 10 14 375 286<br />
134
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
327 D m<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
Logic ADV` screwdrivers<br />
for slot-head screws<br />
− For handling recessed studs<br />
or screws<br />
− Bimaterial ergonomic grip<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
327 PH f<br />
Logic ADV`<br />
screwdrivers for<br />
PHILLIPS` screws<br />
− Bimaterial ergonomic grip<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
UNI-ISO 8764<br />
DIN 5260<br />
axbxc<br />
mm<br />
d<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0,4x2,5x50 2,5 150 24<br />
0,5x3x75 3 175 27<br />
0,6x3,5x100 3,5 200 32<br />
0,8x4x100 4 212 57<br />
0,8x4x150 4 262 63<br />
1x5,5x125 5,5 237 70<br />
1x5,5x150 5,5 262 73<br />
1,2x6,5x150 6,5 270 109<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0x60 3 160 26<br />
0x100 3 200 29<br />
1x80 4,5 192 59<br />
1x125 4,5 237 64<br />
2x100 6 220 99<br />
2x150 6 270 110<br />
3x150 8 270 144<br />
4x200 10 325 249<br />
327 L m<br />
Logic ADV` long<br />
screwdrivers for slothead<br />
screws<br />
− Bimaterial ergonomic grip<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
axbxc<br />
mm<br />
d<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0,4x2,5x200 2,5 300 30<br />
0,6x3,5x250 3,5 350 36<br />
0,8x4x300 4 412 70<br />
1x5,5x350 5,5 462 140<br />
327 N m<br />
Logic ADV` stubby<br />
screwdrivers for slothead<br />
screws<br />
− Bimaterial ergonomic<br />
grip<br />
− Silicon Chrome<br />
Vanadium steel blade<br />
− Chrome plated finish<br />
with burnished tip<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
axbxc<br />
mm<br />
d<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0,8x4x30 4 88 32<br />
1x5,5x30 5 88 35<br />
1,2x6,5x30 6 88 38<br />
327 PH/SE4 f<br />
Set of four screwdrivers<br />
(327 PH/0x60-1x80-2x100-3x150) 330 gr<br />
327 EPH f<br />
Logic ADV` screwdrivers<br />
for PHILLIPS` screws<br />
− Model with hexagonal<br />
driver<br />
− Bimaterial ergonomic<br />
grip<br />
− Chrome Vanadium steel<br />
blade<br />
− Chrome plated finish with<br />
burnished tip<br />
UNI-ISO 8764<br />
DIN 5260<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
2x100 6 10 220 103<br />
3x150 8 12 270 155<br />
4x200 10 14 325 260<br />
135
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
327 LPH f<br />
Logic ADV` long screwdrivers for<br />
PHILLIPS` screws<br />
− Bimaterial ergonomic grip<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
UNI-ISO 8764 DIN 5260<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
1x250 4,5 362 75<br />
2x250 6 370 130<br />
327 PZ n<br />
Logic ADV`<br />
screwdrivers for<br />
POZIDRIV`-SUPADRIV`<br />
screws<br />
− Bimaterial ergonomic grip<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
UNI-ISO 8764<br />
DIN 5260<br />
327 NPH f<br />
Logic ADV` stubby<br />
screwdrivers for<br />
PHILLIPS` screws<br />
− Bimaterial ergonomic<br />
grip<br />
− Silicon Chrome<br />
Vanadium steel blade<br />
− Chrome plated finish<br />
with burnished tip<br />
UNI-ISO 8764<br />
DIN 5260<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
1x30 4,5 88 36<br />
2x30 6 88 41<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0x60 4 170 30<br />
1x80 4,5 190 59<br />
2x100 6 215 99<br />
3x150 8 270 144<br />
4x200 10 325 249<br />
327 PZ/SE4 n<br />
Set of four screwdrivers<br />
(327 PZ/0x60-1x80-2x100-3x150) 332 gr<br />
327 SE10 mc<br />
Set of ten screwdrivers<br />
(327/0,4x2,5x50-0,5x3x75-0,8x4x100-1x5,5x125-<br />
1,2x6,5x150-1,6x8x175 327 PH/0x60-1x80-2x100-<br />
3x150)<br />
750 gr<br />
327 EPZ n<br />
Logic ADV`<br />
screwdrivers for<br />
POZIDRIV`-SUPADRIV`<br />
screws<br />
− Model with hexagonal<br />
driver<br />
− Bimaterial ergonomic grip<br />
− Chrome Vanadium steel<br />
blade<br />
− Chrome plated finish with<br />
burnished tip<br />
UNI-ISO 8764<br />
DIN 5260<br />
327 S7 mc<br />
Set of seven screwdrivers<br />
(327/0,4x2,5x50-0,5x3x75-0,8x4x100-1x5,5x125-<br />
1,2x6,5x150 327 PH/1x80-2x100)<br />
− Supplied in plastic case 550 gr<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
2x100 6 10 220 103<br />
3x150 8 12 270 155<br />
4x200 10 14 325 260<br />
327 S10 mc<br />
Set of ten screwdrivers<br />
(327/0,4x2,5x50-0,5x3x75-0,8x4x100-1x5,5x125-<br />
1,2x6,5x150 327 PH/0x60-1x80-2x100<br />
327 N/1,2x6,5x30 327 NPH/2x30)<br />
− Supplied in plastic case 680 gr<br />
136
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
327 NPZ e<br />
Logic ADV` stubby<br />
screwdrivers for<br />
POZIDRIV`-<br />
SUPADRIV` screws<br />
− Bimaterial ergonomic<br />
grip<br />
− Silicon Chrome<br />
Vanadium steel blade<br />
− Chrome plated finish<br />
with burnished tips<br />
UNI-ISO 8764<br />
DIN 5260<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
1x30 4,5 88 36<br />
2x30 6 88 41<br />
327 TX l<br />
Logic ADV`<br />
screwdrivers for <br />
screws<br />
− Bimaterial ergonomic grip<br />
− Molybdenum Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
n o xa<br />
mm<br />
g<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
T6x50 1,67 2,5 150 24<br />
T7x50 1,99 2,5 150 24<br />
T8x60 2,31 2,5 160 25<br />
T9x60 2,50 3 160 26<br />
T10x75 2,74 3 175 27<br />
T15x75 3,27 3,5 175 30<br />
T20x100 3,86 4 212 58<br />
T25x100 4,43 4,5 212 62<br />
T27x115 4,99 5,5 235 100<br />
T30x115 5,52 6 235 103<br />
T40x130 6,65 7 250 121<br />
T45x130 7,82 8 250 130<br />
327 STX *<br />
Logic ADV`<br />
screwdrivers for <br />
Tamper Resistant`<br />
screws<br />
− For safety screws<br />
− Bimaterial ergonomic grip<br />
− Molybdenum Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
n o xa<br />
mm<br />
g<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
T10x75 2,74 3 175 27<br />
T15x75 3,27 3,5 175 30<br />
T20x100 3,86 4 212 58<br />
T25x100 4,43 4,5 212 62<br />
T27x115 4,99 5,5 235 100<br />
T30x115 5,52 6 235 103<br />
T40x130 6,65 7 250 121<br />
327 STX/S7 *<br />
Set of seven screwdrivers<br />
(327 STX/T10x75»T40x130)<br />
− Supplied in plastic case 600 gr<br />
327 TX/S7 l<br />
Set of seven screwdrivers<br />
(327 TX/T10x75»T40x130)<br />
− Supplied in plastic case<br />
600 gr<br />
137
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
LOGIC`: THE PROFESSIONAL SCREWDRIVER DESIGNED BY<br />
USAG TO MAKE YOUR WORK EASIER.<br />
ERGONOMIC H<strong>AND</strong>GRIP<br />
1)The triangular section facilitates<br />
handling of the tool during difficult<br />
adjustments.<br />
2)The cylindrical portion facilitates<br />
rapid movements and the rotation<br />
required when starting a screwing<br />
action.<br />
3)The perfectly blended handgrip<br />
ensures maximum ergonomy.<br />
! " § $ %<br />
4)The central part is a blended<br />
triangular section with a roughened<br />
non-slip surface, specially designed to<br />
provide a firm grip in any working<br />
conditions.<br />
5)The top of the handgrip is domed so<br />
that greater force can be applied with<br />
less effort.<br />
Colour-coded rings aid identification of the type of<br />
screwdriver by colour:<br />
Red<br />
Pale Blue<br />
Green<br />
Pale Grey<br />
Dark grey<br />
White<br />
= slot-head<br />
= PHILLIPS`<br />
= POZIDRIV`-SUPADRIV`<br />
= <br />
= Tamper Resistant`<br />
= reversible<br />
323 m<br />
Logic` Screwdrivers<br />
for slot-head screws<br />
− Handgrip of technical<br />
polypropylene<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Nickel plated finish<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
323 SE6 m<br />
Set of six screwdrivers<br />
(323/0,4x2,5x50-0,5x3x75-0,8x4x100-<br />
1x5,5x125-1,2x6,5x150-1,6x8x175) 360 gr<br />
axbxc<br />
mm<br />
d<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0,4x2,5x50 2,5 150 18<br />
0,4x2,5x75 2,5 175 19<br />
0,5x3x75 3 175 21<br />
0,5x3x100 3 200 22<br />
0,8x4x75 4 185 36<br />
0,8x4x100 4 210 39<br />
0,8x4x125 4 235 41<br />
0,8x4x150 4 260 43<br />
1x5,5x100 5 215 57<br />
1x5,5x125 5 240 61<br />
1x5,5x150 5 265 65<br />
1,2x6,5x100 6 215 69<br />
1,2x6,5x125 6 240 74<br />
1,2x6,5x150 6 265 80<br />
1,6x8x150 7 270 110<br />
1,6x8x175 7 295 118<br />
1,6x10x200 8 320 147<br />
2x12x250 9 375 215<br />
323 L m<br />
Logic` Long screwdrivers<br />
for slot-head screws<br />
− Handgrip of technical<br />
polypropylene<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Nickel plated finish<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
axbxc<br />
mm<br />
d<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0,4x2,5x200 2,5 300 24<br />
0,6x3,5x250 3,5 360 47<br />
0,8x4x300 4 410 58<br />
1x5,5x350 5,5 465 108<br />
138
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
323 C m<br />
Logic` Screwdrivers with<br />
plastic-coated blades for<br />
slot-head screws<br />
− Handgrip of technical<br />
polypropylene<br />
− PVC coating<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Nickel plated finish<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
axbxc<br />
mm<br />
d<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0,4x2,5x50 5 150 19<br />
0,6x3,5x100 6 210 38<br />
0,6x3,5x150 6 260 43<br />
0,8x4x125 6,5 235 44<br />
0,8x4x150 6,5 260 47<br />
1x5,5x150 8 265 76<br />
1,2x8x175 10,5 295 148<br />
323 N m<br />
Logic` Stubby<br />
screwdrivers for slothead<br />
screws<br />
− Handgrip of technical<br />
polypropylene<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Nickel plated finish<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
axbxc<br />
mm<br />
d<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0,8x4x30 4 90 30<br />
1x5,5x30 5 90 33<br />
1,2x6,5x30 6 90 36<br />
323 PH f<br />
Logic` Screwdrivers<br />
for PHILLIPS` screws<br />
− Handgrip of technical<br />
polypropylene<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Nickel plated finish<br />
UNI-ISO 8764<br />
DIN 5260<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0x60 3 160 20<br />
0x100 3 200 22<br />
1x80 4,5 190 41<br />
1x125 4,5 235 47<br />
2x100 6 215 70<br />
2x150 6 265 81<br />
3x150 8 270 130<br />
4x200 10 325 225<br />
323 PH/SE4 f<br />
Set of four screwdrivers<br />
(323 PH/0x60-1x80-2x100-3x150) 280 gr<br />
323 PH/SE7 f<br />
Set of seven screwdrivers<br />
(323 PH/0x60-0x100-1x80-<br />
1x125-2x100-2x150-3x150)<br />
410 gr<br />
323 NPH f<br />
Logic` Stubby<br />
screwdrivers for<br />
PHILLIPS` screws<br />
− Handgrip of technical<br />
polypropylene<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Nickel plated finish<br />
UNI-ISO 8764<br />
DIN 5260<br />
323 LPH f<br />
Logic` Long<br />
screwdrivers for<br />
PHILLIPS` screws<br />
− Handgrip of technical<br />
polypropylene<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Nickel plated finish<br />
UNI-ISO 8764<br />
DIN 5260<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
1x30 4,5 90 32<br />
2x30 6 90 37<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
1x250 4,5 360 61<br />
2x250 6 365 103<br />
139
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
323 CPH f<br />
Logic` screwdrivers with<br />
plastic-coated blades for<br />
PHILLIPS` screws<br />
− Handgrip of technical<br />
polypropylene<br />
− PVC coating<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Nickel plated finish<br />
UNI-ISO 8764<br />
DIN 5260<br />
323 SE10 m f<br />
Set of ten screwdrivers<br />
(323/0,4x2,5x50-0,5x3x75-0,8x4x100-<br />
1x5,5x125-1,2x6,5x150-1,6x8x175<br />
323 PH/0x60-1x80-2x100-3x150)<br />
700 gr<br />
323 N/SE6 m f<br />
Set of six screwdrivers<br />
(323 N/0,8x4x30-1x5,5x30-1,2x6,5x30<br />
323 NPH/1x30-2x30 323 NR)<br />
240 gr<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
c<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0x60 3 5,5 160 30<br />
1x80 4,5 7 190 43<br />
1x125 4,5 7 235 60<br />
2x100 6 8,5 215 73<br />
2x150 6 8,5 265 105<br />
323 R m f<br />
Logic` Reversible<br />
screwdriver for slothead<br />
and PHILLIPS`<br />
screws<br />
− Handgrip of technical<br />
polypropylene<br />
− Silicon Chrome Vanadium<br />
steel blade<br />
− Nickel plated finish<br />
axbxc<br />
mm<br />
n o xc<br />
mm<br />
d<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
1x6x80 2x80 6 200 80<br />
323 S7 m f<br />
Set of seven screwdrivers<br />
(323/0,4x2,5x50-0,5x3x75-0,8x4x100-<br />
1x5,5x125-1,2x6,5x150 323 PH/1x80-2x100)<br />
− Supplied in plastic case 400 gr<br />
323 S10 m f<br />
Set of ten screwdrivers<br />
(323/0,4x2,5x50-0,5x3x75-0,8x4x100-1x5,5x125-<br />
1,2x6,5x150 323 PH/0x60-1x80-2x100<br />
323 N/1,2x6,5x30 323 NPH/2x30)<br />
− Supplied in plastic case 450 gr<br />
323 NR m f<br />
Logic` Stubby<br />
reversible<br />
screwdriver for slothead<br />
and PHILLIPS`<br />
screws<br />
− Handgrip of technical<br />
polypropylene<br />
− Silicon Chrome<br />
Vanadium steel blade<br />
− Nickel plated finish<br />
axbxc<br />
mm<br />
n o xc<br />
mm<br />
d<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
1x6x30 2x30 6 90 40<br />
140
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
323 PZ n<br />
Logic` Screwdrivers<br />
for POZIDRIV`-<br />
SUPADRIV` screws<br />
− Handgrip of technical<br />
polypropylene<br />
− Molybdenum Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
UNI-ISO 8764 DIN 5260<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0x60 4 170 35<br />
1x80 4,5 190 41<br />
2x100 6 215 71<br />
3x150 8 270 131<br />
323 PZ/SE4 n<br />
Set of four screwdrivers<br />
(323 PZ/0x60-1x80-2x100-3x150) 290 gr<br />
323 TX l<br />
Logic` Screwdrivers<br />
for screws<br />
− Handgrip of technical<br />
polypropylene<br />
− Molybdenum Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
n o xa<br />
mm<br />
g<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
T6x50 1,67 2,5 150 18<br />
T7x50 1,99 2,5 150 18<br />
T8x60 2,31 2,5 160 18<br />
T9x60 2,50 3 160 20<br />
T10x75 2,74 3 175 21<br />
T15x75 3,27 3,5 185 34<br />
T20x100 3,86 4 210 39<br />
T25x100 4,43 4,5 210 44<br />
T27x115 4,99 5,5 230 67<br />
T30x115 5,52 6 230 74<br />
T40x130 6,65 7 250 106<br />
T45x130 7,82 8 250 124<br />
323 TX/S7A l<br />
Set of seven screwdrivers<br />
(323 TX/T10x75»T40x130) 390 gr<br />
323 STX/S7 *<br />
Set of seven screwdrivers<br />
(323 STX/T10x75»T40x130) 390 gr<br />
323 STX *<br />
Logic` Screwdrivers for<br />
Tamper Resistant` <br />
screws<br />
− For safety screws<br />
− Handgrip of technical<br />
polypropylene<br />
− Molybdenum Vanadium steel<br />
blade<br />
− Chrome plated finish with<br />
burnished tip<br />
n o xa<br />
mm<br />
g<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
T10x75 2,74 3 175 21<br />
T15x75 3,27 3,5 185 34<br />
T20x100 3,86 4 210 37<br />
T25x100 4,43 4,5 210 44<br />
T27x115 4,99 5,5 230 66<br />
T30x115 5,52 6 230 74<br />
T40x130 6,65 7 250 107<br />
323 STX/SE7 *<br />
Set of seven screwdrivers<br />
(323 STX/T10x75»T40x130) 390 gr<br />
323 TX/SE12 l<br />
Set of twelve screwdrivers<br />
(323 TX/T6x50»T45x130) 600 gr<br />
141
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
COMBIDRIVE`: TWO <strong>SCREWDRIVERS</strong> IN ONE<br />
The bimaterial ergonomic COMBIDRIVE` handgrip with<br />
interchangeable blades features two blade seatings: one<br />
is axial for rapid screwing and the other is transversal for<br />
a stronger tightening action.<br />
333<br />
COMBIDRIVE` handgrip<br />
− Bimaterial ergonomic handgrip<br />
− For use together with the<br />
blades and accessories of the<br />
COMBIDRIVE` series<br />
q L a b c <br />
”<br />
mm mm mm mm gr<br />
1/4 110 240 178 36 95<br />
333 IPH mc<br />
UNI 10562 ISO 2380<br />
c UNI-ISO 8764<br />
Reversible COMBIDRIVE`<br />
blades for slot-head and<br />
PHILLIPS` screws<br />
− Silicon Chrome Vanadium<br />
steel<br />
− Chrome plated finish<br />
axb n o a L <br />
mm mm gr<br />
”<br />
0,6x3,5 0 1/4 175 43<br />
0,8x4 1 1/4 175 44<br />
1x5,5 2 1/4 175 44<br />
333 I m<br />
Reversible COMBIDRIVE`<br />
blades for slot-head<br />
screws<br />
− Silicon Chrome Vanadium<br />
steel<br />
− Chrome plated finish<br />
UNI 10562 ISO 2380<br />
axb cxd a L <br />
mm mm<br />
”<br />
mm gr<br />
0,6x3,5 0,8x4 1/4 175 42<br />
1x5,5 1,2x6,5 1/4 175 44<br />
333 PZ n<br />
Reversible COMBIDRIVE` blades for<br />
POZIDRIV`-SUPADRIV` screws<br />
− Silicon Chrome Vanadium steel<br />
− Chrome plated finish<br />
UNI-ISO 8764<br />
n o a L <br />
mm gr<br />
”<br />
0-1 1/4 175 43<br />
1-2 1/4 175 43<br />
2-3 1/4 175 44<br />
333 PH c<br />
Reversible COMBIDRIVE`<br />
blades for PHILLIPS` screws<br />
− Silicon Chrome Vanadium steel<br />
− Chrome plated finish<br />
UNI-ISO 8764<br />
n o a L <br />
mm gr<br />
”<br />
0-1 1/4 175 43<br />
1-2 1/4 175 43<br />
2-3 1/4 175 44<br />
333 TX l<br />
Reversible COMBIDRIVE` blades for<br />
TORX` screws<br />
− Silicon Chrome Vanadium steel<br />
− Chrome plated finish<br />
n o g a L <br />
mm mm gr<br />
”<br />
T7-T8 1,99x2,31 1/4 175 42<br />
T9-T10 2,50x2,74 1/4 175 42<br />
T15-T20 3,27x3,86 1/4 175 43<br />
T25-T27 4,43x4,99 1/4 175 44<br />
T30-T40 5,52x6,65 1/4 175 45<br />
142
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
333 STX *<br />
Reversible COMBIDRIVE` blades for TORX`<br />
screws Tamper Resistant`<br />
− Silicon Chrome Vanadium steel<br />
− Chrome plated finish<br />
n o g a L <br />
mm mm gr<br />
”<br />
T7-T8 1,99x2,31 1/4 175 42<br />
T9-T10 2,50x2,74 1/4 175 42<br />
T15-T20 3,27x3,86 1/4 175 43<br />
T25-T27 4,43x4,99 1/4 175 44<br />
T30-T40 5,52x6,65 1/4 175 45<br />
333 E g<br />
Reversible COMBIDRIVE`<br />
blades for Allen screws<br />
− Model with one of the two ends<br />
with spherical head which<br />
enables to work with a<br />
bending up to 25 o as regards<br />
to the screw axis<br />
− Silicon Chrome Vanadium<br />
steel<br />
− Chrome plated finish<br />
a a L <br />
mm mm gr<br />
”<br />
2,5 1/4 175 42<br />
3 1/4 175 42<br />
4 1/4 175 43<br />
5 1/4 175 44<br />
6 1/4 175 45<br />
333 S9 mcg<br />
COMBIDRIVE` assortment<br />
in nylon wallet (9 pcs.) 450 gr<br />
pcs. description<br />
art./size<br />
1 handgrip 333<br />
3 blades for slot-head and 333 IPH/(0,6x3,5-0)-<br />
PHILLIPS` screws<br />
(0,8x4-1)-(1x5,5-2)<br />
5 blades for Allen 333 E/2,5-3-4-5-6<br />
screws<br />
333 1/4” Q<br />
COMBIDRIVE` spinner handle<br />
− Silicon Chrome Vanadium steel<br />
− Chrome plated finish<br />
y a L <br />
” ”<br />
mm gr<br />
1/4 1/4 175 62<br />
333 1/4” MG<br />
Magnetic COMBIDRIVE`<br />
bit-holder<br />
− Silicon Chrome Vanadium<br />
steel<br />
− Chrome plated finish<br />
q a a L <br />
”<br />
mm<br />
”<br />
mm gr<br />
1/4 10 1/4 175 58<br />
333 S10 mc*<br />
COMBIDRIVE` assortment<br />
in nylon wallet (10 pcs.) 500 gr<br />
pcs. description<br />
art./size<br />
1 handgrip 333<br />
2 blades for slot-head screws 333 I/(0,6x3,5-0,8x4)<br />
(1x5,5-1,2x6,5)<br />
2 blades for PHILLIPS` 333 PH/(0-1)-(2-3)<br />
screws<br />
5 blades for TORX` screws 333 STX/(T7-T8)-(T9-T10)-<br />
Tamper Resistant`<br />
(T15-T20)-(T25-T27)<br />
(T30-T40)<br />
143
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
333 S20 mcg<br />
COMBIDRIVE` assortment<br />
in sheet-steel case (20 pcs.)<br />
a 260x180x55 mm 1500 gr<br />
pcs. description<br />
art./size<br />
1 handgrip 333<br />
3 blades for slot-head 333 IPH/(0,6x3,5-0)-<br />
and PHILLIPS` screws<br />
(0,8x4,1)-<br />
(1x5,5-2)<br />
5 blades for Allen 333 E/2,5-3-4-5-6<br />
screws<br />
1 spinner handle 333 1/4” Q<br />
9 hexagonal sockets 235 1/4” E/4-4,5-5-5,5-6-7-8-<br />
9-10<br />
1 universal joint 241 1/4”<br />
333 S20A mcl<br />
COMBIDRIVE` assortment<br />
in sheet-steel case (20 pcs.)<br />
a 260x180x55 mm 1500 gr<br />
pcs. description<br />
art./size<br />
1 handgrip 333<br />
3 blades for slot-head 333 IPH/(0,6x3,5-0)-(0,8x4,1)-<br />
and PHILLIPS` screws<br />
(1x5,5-2)<br />
5 blades for TORX` screws 333 TX/(T7-T8)-(T9-T10)-<br />
(T15-T20)-(T25-T27)-<br />
(T30-T40)<br />
1 spinner handle 333 1/4” Q<br />
9 hexagonal sockets 235 1/4” E/4-4,5-5-5,5-6-7-8-<br />
9-10<br />
1 universal joint 241 1/4”<br />
333 S28 mcng*<br />
COMBIDRIVE` assortment<br />
in sheet-steel case (28 pcs.)<br />
a 260x180x55 mm 1700 gr<br />
pcs. description<br />
art./size<br />
1 handgrip 333<br />
2 blades for slot-head screws 333 I/(0,6x3,5 - 0,8x4)<br />
(1x5,5 - 1,2x6,5)<br />
2 blades for PHILLIPS` 333 PH/(0-1)-(2-3)<br />
screws<br />
2 blades for POZIDRIV`- 333 PZ/(0-1)-(2-3)<br />
SUPADRIV` screws<br />
5 blades for Allen 333 E/2,5-3-4-5-6<br />
screws<br />
5 blades for TORX` screws 333 STX/(T7-T8)-(T9-T10)-<br />
Tamper Resistant`<br />
(T15-T20)-(T25-T27)-<br />
(T30-T40)<br />
1 spinner handle 333 1/4” Q<br />
9 hexagonal sockets 235 1/4” E/4-4,5-5-5,5-6-7-8-<br />
9-10<br />
1 universal joint 241 1/4”<br />
144
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
331 m<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
Screwdrivers for slot-head<br />
screws<br />
− Wooden handgrip with leathercovered<br />
dome<br />
− Full-length Chrome Vanadium<br />
steel shank with hexagon driver<br />
− Chrome plated finish<br />
axbxc<br />
mm<br />
d<br />
ø mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
0,6x3,5x75 4,5 6 175 46<br />
0,8x4x90 4,5 6 185 49<br />
1x5,5x100 5,5 8 200 60<br />
1,2x6,5x125 6 10 235 103<br />
1,2x8x150 8 12 270 156<br />
1,6x10x175 8 12 300 177<br />
2x12x200 9 13 325 230<br />
2,5x14x250 10 16 380 320<br />
335 m<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
Screwholding screwdrivers for<br />
slot-head screws<br />
− For inserting or removing screws in awkward positions<br />
− Ergonomic grip in plastic<br />
bicomponent material<br />
− PVC sheath<br />
− Molybdenum Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
axbxc<br />
mm<br />
d<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
0,6x4,5x125 8,5 237 71<br />
0,6x4,5x200 8,5 312 83<br />
0,8x6x125 10 245 111<br />
0,8x6x200 10 320 122<br />
331 PH f<br />
Screwdrivers for PHILLIPS`<br />
screws<br />
− Wooden handgrip with leathercovered<br />
dome<br />
− Full-length Chrome Vanadium<br />
steel shank with hexagon driver<br />
− Chrome plated finish<br />
UNI-ISO 8764<br />
DIN 5260<br />
335 PH f<br />
UNI-ISO 8764<br />
DIN 5260<br />
Screwholding screwdrivers for<br />
PHILLIPS` screws<br />
− For inserting or removing screws in awkward positions<br />
− Ergonomic grip in plastic<br />
bicomponent material<br />
− PVC sheath<br />
− Molybdenum Vanadium<br />
steel blade<br />
− Chrome plated finish with<br />
burnished tip<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
1x80 4,5 6 180 45<br />
2x100 6 10 210 82<br />
3x150 8 12 265 160<br />
4x200 10 16 330 295<br />
n o xa<br />
mm<br />
b<br />
ø mm<br />
L<br />
mm<br />
<br />
gr<br />
1x125 8,5 237 71<br />
1x200 8,5 312 84<br />
2x125 10 245 111<br />
2x200 10 320 122<br />
PRECISION <strong>SCREWDRIVERS</strong><br />
329<br />
342<br />
See Chapter<br />
ELECTRONICS,<br />
ELECTROTECHNICS<br />
<strong>AND</strong> MICROMECHANICS<br />
Page 270-271 n<br />
145
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
335 S4 m f<br />
Set of four screwholding screwdrivers<br />
(335/0,6x4,5x125-0,8x6x125 335 PH/1x125-2x125)<br />
− Supplied in plastic case 400 gr<br />
335 S4L m f<br />
Set of four screwholding screwdrivers<br />
(335/0,6x4,5x200-0,8x6x200 335 PH/1x200-2x200)<br />
− Supplied in plastic case 460 gr<br />
321/8 m f<br />
Screwdriver with interchangeable blades<br />
− Plastic handgrip with brass blade-chuck<br />
− Carbon steel blades housed in the handgrip<br />
− Nickel plated finish<br />
− Supplied with three blades for slot-head screws<br />
(3-4.5-6) two blades for PHILLIPS` screws (1-2)<br />
and two punches<br />
90 gr<br />
340 m<br />
UNI 10562 ISO 2380<br />
DIN 5264<br />
Offset screwdrivers for slot-head screws<br />
− For working on screws inaccessible<br />
from the perpendicular<br />
− Blade heads set at right angles to<br />
each other to facilitate working in<br />
quarter-turns<br />
− Silicon Chrome Vanadium steel<br />
− Nickel plated finish<br />
axb<br />
mm<br />
c<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
0,5x3 18 90 19<br />
0,6x3,5 18 90 19<br />
0,8x4 18 100 22<br />
1x5,5 20 125 27<br />
1,2x8 22 150 66<br />
1,6x10 27 175 125<br />
340 PH f<br />
Offset screwdrivers for<br />
PHILLIPS` screws<br />
− For working on screws inaccessible<br />
from the perpendicular<br />
− Silicon Chrome Vanadium steel<br />
− Nickel plated finish<br />
UNI-ISO 8764<br />
DIN 5260<br />
n o a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
0-1 18 90 19<br />
1-2 22 125 35<br />
3-4 30 175 130<br />
280 g<br />
Angled hexagon keys<br />
− For Allen screws<br />
− Flat chamfered heads for<br />
a perfect fit with the screw<br />
− Chrome Vanadium steel<br />
− Zinc-chrome plated finish<br />
UNI-ISO 2936 DIN 911<br />
a<br />
mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
1,5 14 45 1<br />
2 16 50 2<br />
2,5 18 56 3<br />
3 20 63 5<br />
3,5 22 66 10<br />
4 25 70 10<br />
4,5 26 75 14<br />
5 28 80 18<br />
6 32 90 29<br />
7 34 95 42<br />
8 36 100 59<br />
9 38 105 80<br />
10 40 112 103<br />
11 42 118 130<br />
12 45 125 168<br />
13 50 132 230<br />
14 56 140 264<br />
17 63 160 440<br />
19 70 180 620<br />
22 80 200 940<br />
24 90 224 1260<br />
27 100 250 1775<br />
30 112 280 2460<br />
32 125 315 3120<br />
36 140 355 4470<br />
146
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
280 P g<br />
Angled hexagon keys<br />
a a L <br />
mm mm gr<br />
”<br />
1/20 13 41 1<br />
1/16 14 45 1<br />
5/64 16 50 2<br />
3/32 18 56 3<br />
1/8 20 63 6<br />
5/32 25 70 10<br />
3/16 28 80 16<br />
7/32 30 85 22<br />
1/4 32 90 32<br />
5/16 36 100 59<br />
3/8 38 105 93<br />
7/16 42 118 140<br />
1/2 50 132 215<br />
280 SE8 g<br />
Setofeightkeys<br />
(280/1,5-2-2,5-3-3,5-4-5-6 mm)<br />
− Supplied in plastic wallet 95 gr<br />
280 P/SE8 g<br />
Setofeightkeys(280 P/1/16»1/4”)<br />
− Supplied in plastic wallet 95 gr<br />
280 N g<br />
Angled hexagon keys<br />
− For Allen screws<br />
− Flat chamfered heads for a<br />
perfect fit with the screw<br />
− Chrome Vanadium steel<br />
− Burnished finish<br />
UNI-ISO 2936 DIN 911<br />
280 N/SE8 g<br />
Setofeightkeys<br />
(280 N/1,5-2-2,5-3-3,5-4-5-6 mm)<br />
− Supplied in plastic wallet 95 gr<br />
a<br />
mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
1,5 14 45 1<br />
2 16 50 2<br />
2,5 18 56 3<br />
3 20 63 5<br />
3,5 22 66 10<br />
4 25 70 10<br />
4,5 26 75 14<br />
5 28 80 18<br />
6 32 90 29<br />
7 34 95 42<br />
8 36 100 59<br />
9 38 105 80<br />
10 40 112 103<br />
11 42 118 130<br />
12 45 125 168<br />
280 SE12 g<br />
Setoftwelvekeys(280/2»10 mm)<br />
− Supplied in plastic wallet 400 gr<br />
280 P/SE12 g<br />
Setoftwelvekeys(280 P/1/20»7/16”)<br />
− Supplied in plastic wallet 400 gr<br />
280 N/SE12 g<br />
Setoftwelvekeys(280 N/2»10 mm)<br />
− Supplied in plastic wallet 400 gr<br />
147
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
280 S9 g<br />
Setofninekeys<br />
(280/1,5-2-2,5-3-4-5-6-<br />
8-10 mm)<br />
− Supplied in plastic<br />
holder<br />
250 gr<br />
280 S12 g<br />
Set of twelve keys (280/2»10 mm)<br />
− Supplied in plastic holder 440 gr<br />
280 P/S12 g<br />
Set of twelve keys (280 P/1/20»7/16”)<br />
− Supplied in plastic holder 440 gr<br />
280 N/S9 g<br />
Setofninekeys<br />
(280 N/1,5-2-2,5-3-4-5-6-<br />
8-10 mm)<br />
− Supplied in plastic<br />
holder<br />
250 gr<br />
280 SV9<br />
Holder only<br />
280 N/S12 g<br />
Set of twelve keys (280 N/2»10 mm)<br />
− Supplied in plastic holder 440 gr<br />
280 SV12<br />
Holder only<br />
− For 280-280 N<br />
280 P/SV12<br />
Holder only<br />
− For 280 P<br />
280 S6 g<br />
Setofsixkeysonring<br />
(280/2,5-3-4-5-6-8 mm) 130 gr<br />
280 P/S6 g<br />
Setofsixkeysonring<br />
(280 P/3/32-1/8-5/32-3/16-7/32-5/16”) 130 gr<br />
280 MP/S24 g<br />
Set of twenty-four keys<br />
(280/2»10 mm 280 P/1/20»7/16”)<br />
− Supplied in plastic wallet 880 gr<br />
280 MP/SV24<br />
Wallet only<br />
280 S7 g<br />
Setofsevenkeys<br />
(280/2-2,5-3-4-4,5-5-6 mm)<br />
− Supplied in plastic<br />
holder<br />
95 gr<br />
148
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
280 L/S12 g<br />
Setoftwelvekeys<br />
(280 L/2»10 mm)<br />
− Supplied in plastic<br />
holder<br />
720 gr<br />
280 L/SV12<br />
Holder only<br />
280 S5 g<br />
Set of five hexagon keys<br />
(4-5-6-8-10 mm)<br />
− Supplied with pocket holder in steel with impactresistant<br />
plastic coating<br />
− Burnished finish 285 gr<br />
280 S8 g<br />
Set of eight hexagon keys<br />
(1,5-2-2,5-3-4-5-6-8 mm)<br />
− Supplied with pocket holder in steel with impactresistant<br />
plastic coating<br />
− Burnished finish 220 gr<br />
280 P/S7 g<br />
Set of seven hexagon keys<br />
(3/32-1/8-5/32-3/16-7/32-1/4-3/8”)<br />
− Supplied with pocket holder in steel with impactresistant<br />
plastic coating<br />
− Burnished finish 265 gr<br />
280 L/S9 g<br />
Setofninekeys<br />
(280 L/1,5-2-2,5-3-4-5-6-<br />
8-10 mm)<br />
− Supplied in plastic<br />
holder<br />
405 gr<br />
280 L/SV9<br />
Holder only<br />
280 L g<br />
Long angled hexagon keys<br />
− For Allen screws<br />
− Flat chamfered heads for a<br />
perfect fit with the screw<br />
− Chrome Vanadium steel<br />
− Burnished finish<br />
a<br />
mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
1,5 13 88 2<br />
2 15 98 3<br />
2,5 17 112 5<br />
3 20 122 8<br />
3,5 22 131 12<br />
4 25 141 18<br />
4,5 26 150 24<br />
5 28 160 32<br />
6 32 174 49<br />
7 34 185 73<br />
8 36 197 99<br />
9 38 210 140<br />
10 40 224 180<br />
12 45 238 275<br />
DIN 911<br />
280 R<br />
DIN 6911<br />
Angled hexagon keys<br />
with pin<br />
− For ribe-CS screws<br />
− Chrome Vanadium steel<br />
− Burnished finish<br />
a<br />
mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
3 20 62 5<br />
4 25 68 10<br />
5 28 78 17<br />
6 32 88 28<br />
8 36 98 56<br />
10 40 109 98<br />
280 R/SE6<br />
Setofsixkeys(280 R/3»10 mm)<br />
215 gr<br />
149
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
280 LTS g<br />
Long angled hexagon keys<br />
with spherical head<br />
− For Allen screws<br />
− Model permitting work at an<br />
angleofupto25 o from the<br />
centreline<br />
− Chrome Vanadium steel<br />
− Burnished finish<br />
a<br />
mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
1,5 14 62 2<br />
2 16 75 3<br />
2,5 18 85 5<br />
3 20 90 7<br />
4 25 100 13<br />
5 28 115 24<br />
6 32 135 44<br />
8 36 150 79<br />
10 40 170 142<br />
280 LTSP<br />
a a L <br />
mm mm gr<br />
”<br />
1/16 14 62,5 2<br />
5/64 13,5 75 3<br />
3/32 17,5 84,5 5<br />
1/8 20 90 7<br />
5/32 25 100 13<br />
3/16 27 117 24<br />
7/32 30,5 135,5 41<br />
1/4 33 141,5 60<br />
5/16 36 150 79<br />
3/8 37,5 170,5 130<br />
280 LTS/S9 g<br />
Set of nine keys<br />
(280 LTS/1,5»10 mm)<br />
− Supplied in plastic holder<br />
350 gr<br />
280 LTS/SV9<br />
Holder only<br />
280 LTSP/S9 g<br />
Set of nine keys<br />
(280 LTSP/1/16-5/64-3/32-<br />
1/8-5/32-3/16-7/32-1/4-3/8”)<br />
− Supplied in plastic holder<br />
320 gr<br />
280 TS/S5<br />
Set of five hexagon keys with<br />
spherical head<br />
(4-5-6-8-10 mm) 285 gr<br />
280 TX l<br />
Angled hexagon keys<br />
for screws<br />
− Chrome Vanadium steel<br />
− Burnished finish<br />
n o g<br />
mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
T6 1,67 16 42 2<br />
T7 1,99 16 48 3<br />
T8 2,31 16 48 3<br />
T9 2,50 16 48 4<br />
T10 2,74 17 51 4<br />
T15 3,27 18 54 5<br />
T20 3,86 20 57 7<br />
T25 4,43 20 60 10<br />
T27 4,99 21 63 16<br />
T30 5,52 24 70 20<br />
T40 6,65 26 76 30<br />
T45 7,82 28 82 43<br />
T50 8,83 31 94 61<br />
T55 11,22 35 108 120<br />
T60 13,25 38 120 185<br />
280 TX/SE8 l<br />
Setofeightkeys(280 TX/T6»T25)<br />
280 TX/SE7 l<br />
Setofsevenkeys(280 TX/T27»T60)<br />
40 gr<br />
475 gr<br />
280 LTSP/SV9<br />
Holder only<br />
150
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
280 TX/S6 l<br />
Set of six keys (280 TX/T15»T40)<br />
− Supplied in plastic holder<br />
120 gr<br />
280 TX/SV6<br />
Holder only<br />
280 LTSTX l<br />
Long angled hexagon keys<br />
for screws with<br />
spherical head<br />
− Can be inserted into screws<br />
up to 25 o angle<br />
− Molybdenum Vanadium steel<br />
− Burnished finish<br />
n o g<br />
mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
T15 3,27 18 90 8<br />
T20 3,86 19 95 11<br />
T25 4,43 20 100 14<br />
T27 4,99 21 105 22<br />
T30 5,52 24 115 29<br />
T40 6,65 26 125 42<br />
T45 7,82 28 130 61<br />
T50 8,83 32 150 88<br />
T55 11,22 35 170 170<br />
280 TX/S8 l<br />
Set of eight keys<br />
(T9-T10-T15-T20-T25-T27-T30-T40)<br />
− Supplied in pocket holder in steel with<br />
impact-resistant plastic coating<br />
− Burnished finish 220 gr<br />
280 STX/S8 *<br />
Set of eight keys<br />
(T9-T10-T15-T20-T25-T27-T30-T40)<br />
− Supplied in pocket holder in steel with<br />
impact-resistant plastic coating<br />
− Burnished finish 215 gr<br />
280 LTSTX/S6 l<br />
Setofsixkeys<br />
(280 LTSTX/T15»T40)<br />
− Supplied in plastic holder<br />
136 gr<br />
280 LTSTX/SV6<br />
Empty plate holder<br />
151
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
280 XZN j<br />
Angled hexagon keys<br />
for XZN screws<br />
− Chrome Vanadium steel<br />
− Nickel plated finish<br />
for screws<br />
M<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
5 25 72 15<br />
6 28 80 31<br />
8 32 90 48<br />
10 36 100 83<br />
12 40 112 130<br />
14 45 125 200<br />
16 55 140 305<br />
280 D g<br />
Hexagon keys with handgrip<br />
− For Allen screws<br />
− Ergonomic grip in plastic<br />
bicomponent material<br />
− Chrome Vanadium steel shank<br />
− Chrome plated finish<br />
UNI 10753<br />
a<br />
mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
1,5 70 170 27<br />
2 70 170 28<br />
2,5 75 175 25<br />
3 80 180 29<br />
4 95 207 59<br />
5 105 217 71<br />
6 120 240 109<br />
8 150 275 181<br />
10 175 300 249<br />
280 D/SE9 g<br />
Setofninekeys<br />
(280 D/1,5»10 mm) 780 gr<br />
280 XZN/S5 j<br />
Set of five hexagon keys for XZN screws<br />
(M5-M6-M8-M10-M12)<br />
− Supplied in pocket sheet-steel holder<br />
− Nickel plated finish<br />
430 gr<br />
280 TS g<br />
Hexagon keys with spherical<br />
head and handgrip<br />
− For Allen screws<br />
− Model permitting work at<br />
anangleofupto25 o from<br />
the centreline<br />
− Ergonomic grip in plastic<br />
bicomponent material<br />
− Chrome Vanadium steel<br />
shank<br />
− Chrome plated finish<br />
a<br />
mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
2,5 100 200 27<br />
3 100 200 30<br />
4 100 212 60<br />
5 100 212 71<br />
6 125 245 110<br />
8 150 275 180<br />
10 150 275 220<br />
12 200 325 332<br />
280 TS/SE8 g<br />
Setofeightkeys<br />
(280 TS/2,5»12 mm) 1040 gr<br />
152
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
280 IT g<br />
Angled hexagon keys with<br />
handgrip<br />
− For Allen screws<br />
− Polypropylene handgrip<br />
− Chrome Vanadium steel<br />
shank<br />
− Chrome plated finish<br />
a<br />
mm<br />
a<br />
mm<br />
b<br />
mm<br />
c<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
2 100 10 53 126 15<br />
2,5 100 10 53 126 18<br />
3 100 10 53 126 21<br />
3,5 100 10 53 126 24<br />
4 150 11 66 183 44<br />
4,5 150 11 66 183 51<br />
5 150 12 66 183 58<br />
6 200 12 82 241 112<br />
7 200 14 82 241 136<br />
8 200 14 82 241 164<br />
10 200 16 82 241 230<br />
280 IT/SE11 g<br />
Set of eleven keys (280 IT/2»10)<br />
280 ITTS g<br />
Angled hexagon keys<br />
with spherical head<br />
and handgrip<br />
− For Allen screws<br />
− Model permitting work at<br />
anangleofupto25 o from<br />
the centreline<br />
− Polypropylene handgrip<br />
− Chrome Vanadium steel shank<br />
− Crome plated finish<br />
805 gr<br />
280 ITTX l<br />
Angled hexagon keys<br />
with handgrip for <br />
screws<br />
− Polypropylene handgrip<br />
− Molybdenum Vanadium<br />
steel shank<br />
− Burnished finish<br />
n o g<br />
mm mm a mm b mm c mm d mm L <br />
gr<br />
T6 1,67 100 10 53 2,5 126 17<br />
T7 1,99 100 10 53 2,5 126 17<br />
T8 2,31 100 10 53 2,5 126 17<br />
T9 2,50 100 10 53 3 126 20<br />
T10 2,74 100 10 53 3 126 19<br />
T15 3,27 100 10 53 3,5 126 24<br />
T20 3,86 100 11 66 4 133 38<br />
T25 4,43 100 12 66 5 133 45<br />
T27 4,99 100 12 66 5,5 133 60<br />
T30 5,52 150 12 82 6 191 90<br />
T40 6,65 150 14 82 7 191 105<br />
T45 7,82 150 14 82 8 191 131<br />
T50 8,83 150 16 82 10 191 174<br />
280 ITTX/SE11 l<br />
Setofelevenkeys<br />
(280 ITTX/T6»T40) 410 gr<br />
a<br />
mm<br />
a<br />
mm<br />
b<br />
mm<br />
c<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
2,5 100 10 53 126 18<br />
3 100 10 53 126 21<br />
4 150 11 66 183 44<br />
5 150 12 66 183 58<br />
6 200 12 82 241 112<br />
8 200 14 82 241 164<br />
10 200 16 82 241 230<br />
280 ITTS/SE7 g<br />
Setofsevenkeys(280 ITTS/2,5»10 mm)<br />
580 gr<br />
153
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
280 T g<br />
Male hexagon T-drivers<br />
− For Allen screws<br />
− Silicon Chrome Vanadium<br />
steel<br />
− Chrome plated finish with<br />
burnished hexagon heads<br />
up to size 7 mm to ensure<br />
precise measurement and<br />
perfect fit with the screw<br />
a<br />
mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
2 62 125 19<br />
2,5 62 125 19<br />
3 75 150 24<br />
3,5 75 150 24<br />
4 90 180 62<br />
4,5 90 180 62<br />
5 90 180 99<br />
6 105 210 135<br />
7 105 210 135<br />
8 125 250 200<br />
9 140 280 320<br />
10 150 300 410<br />
12 160 320 590<br />
14 170 340 830<br />
280 T/SE8 g<br />
Set of eight T-drivers<br />
(280 T/2-2,5-3-4-5-6-8-10 mm) 1Kg<br />
280 T/SE14 g<br />
Set of fourteen T-drivers<br />
(280 T/2»14 mm) 3Kg<br />
280 TTX l<br />
T-drivers for <br />
screws<br />
− Molybdenum Vanadium<br />
steel<br />
− Chrome plated finish with<br />
burnished heads<br />
n o g<br />
mm<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
T6 1,67 62 125 22<br />
T7 1,99 62 125 22<br />
T8 2,31 62 125 22<br />
T9 2,50 62 125 22<br />
T10 2,74 75 150 23<br />
T15 3,27 75 150 24<br />
T20 3,86 75 150 24<br />
T25 4,43 90 180 61<br />
T27 4,99 90 180 61<br />
T30 5,52 90 180 62<br />
T40 6,65 105 210 134<br />
T45 7,82 105 210 145<br />
T50 8,83 125 250 220<br />
T55 11,22 150 300 405<br />
T60 13,25 160 320 560<br />
280 TTX/SE8 l<br />
Set of eight T-drivers<br />
(280 TTX/T6»T25) 230 gr<br />
280 TTX/SE7 l<br />
Set of seven T-drivers<br />
(280 TTX/T27»T60) 1700 gr<br />
280 T/S8 g<br />
Set of eight T-drivers<br />
(280 T/2-2,5-3-4-5-6-8-10 mm)<br />
− Supplied in sheet-steel stand<br />
280 T/SV8<br />
Stand only<br />
1,8 Kg<br />
154
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
273 g<br />
Swivel head T-handle wrenches<br />
with hexagon male<br />
− For Allen screws<br />
− Model with spring friction<br />
joint for presetting the<br />
socket at the desired<br />
working angle<br />
− Removable sliding bar<br />
− Silicon Chrome Vanadium<br />
steel<br />
− Chrome plated finish<br />
UNI 6754<br />
a<br />
mm<br />
a<br />
mm<br />
b<br />
mm<br />
c<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
3 13 5 165 398 260<br />
4 13 5 165 398 260<br />
5 13 6 165 398 260<br />
6 13 8 165 398 260<br />
7 13 9 165 398 265<br />
8 13 10 165 398 265<br />
10 13 12 165 398 270<br />
273 CTX l<br />
Swivel head T-handle<br />
wrenches<br />
− Model with universal<br />
joint and spring friction<br />
for presetting the<br />
socket at the desired<br />
working angle<br />
− Removable sliding bar<br />
− Silicon Chrome Vanadium<br />
steel<br />
− Chrome plated finish with<br />
burnished head<br />
n o g<br />
mm<br />
a<br />
mm<br />
b<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
T20 3,86 13,5 165 403 220<br />
T25 4,43 13,5 165 403 220<br />
T27 4,99 13,5 165 403 225<br />
T30 5,52 18 175 436 325<br />
T40 6,65 18 175 436 325<br />
T45 7,82 18 175 436 330<br />
T50 8,83 20,5 175 468 410<br />
T55 11,22 24 180 500 547<br />
273 CTX/SE8<br />
Set of eight wrenches<br />
(273 CTX/T20»T55) 2,3 Kg<br />
273 C g<br />
Swivel head T-handle<br />
wrenches with<br />
hexagon male<br />
− For Allen screws<br />
− Model with universal<br />
joint and spring friction<br />
for presetting the<br />
socket at the desired<br />
working angle<br />
− Removable sliding bar<br />
− Silicon Chrome Vanadium<br />
steel<br />
− Chrome plated finish<br />
UNI 6754<br />
a<br />
mm<br />
a<br />
mm<br />
b<br />
mm<br />
c<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
3 13,5 5 165 393 230<br />
4 13,5 6 165 393 230<br />
5 13,5 7 165 393 230<br />
6 18 9 175 430 326<br />
8 18 11 175 430 328<br />
10 18 13 175 432 335<br />
155
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
299<br />
ISO 2236<br />
Hexagon socket spinner<br />
wrenches with Logic`<br />
handle<br />
− Deep hexagon socket for<br />
working on projecting screws<br />
− Ergonomic polypropylene<br />
handle<br />
− Chrome Vanadium steel body<br />
− Chrome-plated finish<br />
W<br />
mm<br />
a<br />
mm<br />
b<br />
mm<br />
c<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
3,2 6 125 20 240 76<br />
4 7 125 20 240 78<br />
5 8 125 25 240 78<br />
5,5 8,8 125 30 240 78<br />
6 9,4 125 35 240 80<br />
7 11 125 35 245 99<br />
8 12 125 50 245 125<br />
9 13,3 125 50 245 132<br />
10 14,5 125 50 245 148<br />
11 16 125 50 245 159<br />
12 17 125 50 245 159<br />
13 18,5 125 55 250 215<br />
14 20 125 55 250 220<br />
299 SE12<br />
Set of twelve spinner wrenches (299/4»14 mm)<br />
1,6 Kg<br />
298<br />
UNI 6750 ISO 2236<br />
Hexagon socket spinner<br />
wrenches with Logic`<br />
handgrip<br />
− Ergonomic polypropylene<br />
handgrip<br />
− Chrome Vanadium steel<br />
body<br />
− Chrome plated finish<br />
W<br />
mm<br />
a<br />
mm<br />
b<br />
mm<br />
c<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
4 7 70 4 188 62<br />
5 8 70 7 188 63<br />
5,5 9 70 7 188 64<br />
6 9 70 8 188 64<br />
7 11 70 9 193 89<br />
8 12 70 9 193 89<br />
9 13 70 10 193 90<br />
10 14 70 11 193 102<br />
11 16 70 11 193 102<br />
12 17 70 12 193 110<br />
13 18 70 13 198 172<br />
14 20 70 14 198 176<br />
298 SE12<br />
Set of twelve wrenches (298/4»14 mm)<br />
1,6 Kg<br />
299 S12<br />
Set of twelve spinner wrenches (299/4»14 mm)<br />
− Supplied in sheet-steel stand<br />
299 SV12<br />
Stand only<br />
2,2 Kg<br />
298 L<br />
UNI 6750 ISO 2236<br />
Long hexagon socket<br />
spinner wrenches with<br />
Logic` handgrip<br />
− Ergonomic polypropylene<br />
handle<br />
− Chrome Vanadium steel<br />
body<br />
− Chrome-plated finish<br />
W<br />
mm<br />
a<br />
mm<br />
b<br />
mm<br />
c<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
4 7 150 4 265 79<br />
5 8 150 7 265 79<br />
5,5 9 150 7 265 79<br />
6 9 150 8 265 80<br />
7 11 150 9 270 115<br />
8 12 150 9 270 116<br />
9 13 150 10 270 119<br />
10 14 150 11 270 138<br />
11 16 150 11 270 141<br />
12 17 150 12 270 135<br />
13 18 150 13 275 230<br />
14 20 150 14 275 230<br />
298 L/SE12<br />
Set of twelve wrenches (298 L/4»14 mm)<br />
2Kg<br />
156
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
298 S12<br />
Set of twelve wrenches (298/4»14 mm)<br />
− Supplied in sheet-steel stand 2,4 Kg<br />
298 L/S12<br />
Set of twelve wrenches (298 L/4»14 mm)<br />
− Supplied in sheet-steel stand 2,7 Kg<br />
298 SV12<br />
Stand only<br />
298 SN<br />
Flexible hexagon socket<br />
spinner wrenches<br />
with Logic` handle<br />
− Maximum permissible<br />
torsion = 10 Nm<br />
− Ergonomic polypropylene<br />
handle<br />
− Chrome Vanadium steel<br />
body<br />
− Chrome-plated finish<br />
W<br />
mm<br />
a<br />
mm<br />
b<br />
mm<br />
c<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
5 8 155 14 270 113<br />
5,5 8 155 14 270 115<br />
6 9 155 14 270 116<br />
7 11 155 14 270 117<br />
8 12 155 14 270 118<br />
9 13 155 14 270 118<br />
10 14 175 14 300 195<br />
11 16 175 14 300 198<br />
13 19 175 14 300 205<br />
298 SN/SE9<br />
Set of nine spinner wrenches<br />
(298 SN/5»13 mm) 1,3 Kg<br />
157
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
BITS FOR MANUAL, ELECTRICAL<br />
<strong>AND</strong> PNEUMATIC IMPACT <strong>WRENCHES</strong><br />
Bits of the 660 and 661 series fit directly into hand impact wrench and, with<br />
the appropriate bit-holder, can also be used with electric or pneumatic impact<br />
wrench.<br />
Bits of the 664 series do not require a bit-holder.<br />
O1<br />
UNI-ISO 1173 DIN 3126 C 6,3<br />
660 m<br />
Bits for slotted<br />
screws<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
axb<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
0,5x4 25 6<br />
0,6x4,5 25 6<br />
0,8x5,5 25 8<br />
1x5,5 25 10<br />
1,2x6,5 25 12<br />
1,6x8 25 15<br />
660 PH f<br />
Bits for PHILLIPS`<br />
screws<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
UNI-ISO 2351<br />
DIN 3127<br />
ISO 8764 DIN 3128<br />
n o L<br />
mm<br />
<br />
gr<br />
0 25 6<br />
1 25 6<br />
2 25 6<br />
3 25 6<br />
4 32 10<br />
660 PZ n<br />
Bits for POZIDRIV`<br />
and SUPADRIV`<br />
screws<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
ISO 8764<br />
660 TX l<br />
Bits for <br />
screws<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
n o g<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
T6 1,67 25 5<br />
T7 1,99 25 5<br />
T8 2,31 25 5<br />
T9 2,50 25 5<br />
T10 2,74 25 5<br />
T15 3,27 25 5<br />
T20 3,86 25 5<br />
T25 4,43 25 6<br />
T27 4,99 25 6<br />
T30 5,52 25 7<br />
T40 6,65 25 7<br />
660 STX *<br />
Bits for TAMPER<br />
RESISTANT` <br />
screws<br />
− For safety screws<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
n o g<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
T10 2,74 25 5<br />
T15 3,27 25 5<br />
T20 3,86 25 5<br />
T25 4,43 25 6<br />
T27 4,99 25 6<br />
T30 5,52 25 7<br />
T40 6,65 25 7<br />
n o L<br />
mm<br />
<br />
gr<br />
0 25 6<br />
1 25 6<br />
2 25 6<br />
3 25 6<br />
4 32 10<br />
158
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
660 E g<br />
Bits for Allen screws<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
ISO 3109 DIN 7426<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
1,5 25 5<br />
2 25 5<br />
2,5 25 5<br />
3 25 5<br />
4 25 5<br />
5 25 6<br />
6 25 6<br />
8 25 8<br />
10 25 10<br />
660 EP g<br />
a L <br />
mm<br />
gr<br />
”<br />
1/8 25 5<br />
5/32 25 6<br />
3/16 25 6<br />
7/32 25 6<br />
1/4 25 8<br />
660 T m<br />
Bits for slotted<br />
screws<br />
− Wear-resistant<br />
titanium nitride<br />
coating<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Gilt finish with oiled,<br />
sand-blasted drive<br />
axb<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
0,6x4,5 25 4<br />
0,8x5,5 25 4<br />
1x5,5 25 4<br />
1,2x6,5 25 4<br />
1,6x8 25 4<br />
UNI-ISO 2351<br />
DIN 3127<br />
660 TPH f<br />
Bits for PHILLIPS`<br />
screws<br />
− Wear-resistant<br />
titanium nitride<br />
coating<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Gilt finish with oiled,<br />
sand-blasted drive<br />
ISO 8764 DIN 3128<br />
n o L<br />
mm<br />
<br />
gr<br />
1 25 3,5<br />
2 25 4<br />
3 25 4,5<br />
660 TAPH f<br />
Bits for PHILLIPS`<br />
screws<br />
− Wear-resistant<br />
titanium nitride<br />
coating<br />
− Anti-slip knurling<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Gilt finish with oiled,<br />
sand-blasted drive<br />
ISO 8764 DIN 3128<br />
n o L<br />
mm<br />
<br />
gr<br />
1 25 3,5<br />
2 25 4<br />
3 25 4,5<br />
660 TPZ n<br />
Bits for POZIDRIV`-<br />
SUPADRIV` screws<br />
− Wear-resistant<br />
titanium nitride<br />
coating<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Gilt finish with oiled,<br />
sand-blasted drive<br />
n o L<br />
mm<br />
<br />
gr<br />
1 25 3,5<br />
2 25 4<br />
3 25 4,5<br />
ISO 8764<br />
159
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
Op<br />
661 m<br />
Bits for slotted screws<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
UNI-ISO 1173 DIN 3126 C 8<br />
axb<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
0,8x5,5 41 10<br />
1x6,5 41 12<br />
1,2x8 41 14<br />
1,6x10 41 18<br />
2x13 41 22<br />
UNI-ISO 2351<br />
DIN 3127<br />
661 PH f<br />
Bits for PHILLIPS`<br />
screws<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish ISO 8764 DIN 3128<br />
n o L<br />
mm<br />
<br />
gr<br />
1 32 8<br />
2 32 10<br />
3 32 12<br />
4 32 16<br />
661 PZ n<br />
Bits for POZIDRIV`-<br />
SUPADRIV` screws<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish ISO 8764<br />
n o L<br />
mm<br />
<br />
gr<br />
1 32 8<br />
2 32 10<br />
3 32 12<br />
4 38 16<br />
661 TX l<br />
Bits for screws<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
n o g<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
T27 4,99 35 10<br />
T30 5,52 35 11<br />
T40 6,65 35 12<br />
T45 7,82 35 13<br />
T50 8,83 35 14<br />
T55 11,22 35 20<br />
661 E g<br />
Bits for Allen screws<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish UNI-ISO 3109<br />
DIN 7426<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
3 30 8<br />
4 30 8<br />
5 30 8<br />
6 30 8<br />
7 30 10<br />
8 30 12<br />
10 30 16<br />
O1<br />
UNI-ISO 1173 DIN 3126 E 6,3<br />
664 m<br />
Bits for slotted screws<br />
− Direct fitting for<br />
electric and<br />
pneumatic impact<br />
wrenches<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
axb<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
0,5x3 50 7<br />
0,6x4 50 8<br />
0,6x4,5 50 8<br />
0,8x5 50 9<br />
0,8x5,5 50 10<br />
1x6 50 11<br />
1x7 50 12<br />
1,2x8 50 14<br />
1,6x9 50 16<br />
UNI-ISO 2351<br />
DIN 3127<br />
664 PH f<br />
Bits for PHILLIPS`<br />
screws<br />
− Direct fitting for<br />
electric and<br />
pneumatic impact<br />
wrenches<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish ISO 8764 DIN 3128<br />
n o L<br />
mm<br />
<br />
gr<br />
1 50 10<br />
2 50 10<br />
3 50 13<br />
4 50 17<br />
160
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
664 PZ n<br />
Bits for POZIDRIV`-<br />
SUPADRIV` screws<br />
− Direct fitting for<br />
electric and<br />
pneumatic impact<br />
wrenches<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
n o L<br />
mm<br />
<br />
gr<br />
1 50 7<br />
2 50 10<br />
3 50 13<br />
4 50 17<br />
664 TX l<br />
Bits for <br />
screws<br />
− Direct fitting for<br />
electric and pneumatic<br />
impact wrenches<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
n o g<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
T10 2,74 70 9<br />
T15 3,27 70 10<br />
T20 3,86 70 11<br />
T25 4,43 70 13<br />
T27 4,99 70 14<br />
T30 5,52 70 16<br />
T40 6,65 70 18<br />
664 E g<br />
Bits for Allen screws<br />
− Direct fitting for<br />
electric and<br />
pneumatic impact<br />
wrenches<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
a<br />
mm<br />
L<br />
mm<br />
<br />
gr<br />
3 50 9<br />
4 50 10<br />
5 50 11<br />
6 50 12<br />
8 50 18<br />
10 50 25<br />
ISO 8764<br />
UNI-ISO 3109<br />
DIN 7426<br />
O1<br />
UNI-ISO 1173 DIN 3126 E 6,3<br />
664 Q<br />
Socket-holder adapters<br />
− Direct fitting for electric<br />
and pneumatic impact<br />
wrenches<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted finish UNI-ISO 3317<br />
DIN 7428<br />
y L <br />
mm<br />
gr<br />
”<br />
1/4 50 15<br />
3/8 50 22<br />
672<br />
Bit-holder adapter<br />
− Direct fitting for electric<br />
and pneumatic impact<br />
wrenches<br />
− Silicon Chrome Vanadium<br />
steel<br />
− Oiled, sand-blasted finish UNI-ISO 1173<br />
DIN 7427<br />
q a L <br />
mm mm gr<br />
”<br />
1/4 11 60 30<br />
672 MG<br />
Magnetic bit-holder<br />
adapter<br />
− Direct fitting for electric<br />
and pneumatic impact<br />
wrenches<br />
− Silicon Chrome Vanadium<br />
steel<br />
− Oiled, sand-blasted finish<br />
UNI-ISO 1173<br />
DIN 7427<br />
q a L <br />
mm mm gr<br />
”<br />
1/4 10 60 45<br />
672 A<br />
Bit-holder adapter<br />
− Model with quick-release<br />
sleeve<br />
− Direct fitting for electric<br />
and pneumatic impact<br />
wrenches<br />
− Silicon Chrome Vanadium<br />
steel<br />
− Oiled, sand-blasted finish<br />
with burnished check collar<br />
UNI-ISO 1173<br />
DIN 3126<br />
q a L <br />
mm mm gr<br />
”<br />
1/4 14 51 23<br />
161
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
672 AMG<br />
Magnetic bit-holder<br />
adapter<br />
− Model with quickrelease<br />
sleeve<br />
− Direct fitting for electric<br />
and pneumatic impact<br />
wrenches<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish with burnished<br />
check collar<br />
UNI-ISO 1173<br />
DIN 3126<br />
q a L <br />
mm mm gr<br />
”<br />
1/4 14 52 25<br />
Oq<br />
670<br />
Bit-holder adapter<br />
− Direct fitting for electric<br />
and pneumatic impact<br />
wrenches<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
UNI-ISO 1173 DIN 3126 A 5,5<br />
UNI-ISO 1173<br />
DIN 7427<br />
q a L <br />
mm mm gr<br />
”<br />
1/4 11 60 30<br />
670 MG<br />
Magnetic bit-holder<br />
adapter<br />
− Direct fitting for electric<br />
and pneumatic impact<br />
wrenches<br />
− Silicon Chrome<br />
Vanadium steel<br />
− Oiled, sand-blasted<br />
finish<br />
UNI-ISO 1173<br />
DIN 7427<br />
q a L <br />
mm mm gr<br />
”<br />
1/4 10 79 34<br />
684<br />
Bit-holder<br />
− For use of bits of the<br />
660 series on manual<br />
impact wrenches<br />
− Chrome Vanadium<br />
steel<br />
− Polished chrome<br />
plated finish<br />
UNI-ISO 1173-1174<br />
DIN 3126<br />
Y q a b L <br />
mm mm mm gr<br />
” ”<br />
1/4 1/4 11 11 22 27<br />
685<br />
Bit-holders<br />
− For use of bits of the<br />
660 and 661 series on<br />
electric and<br />
pneumatic impact<br />
wrenches<br />
− Chrome Vanadium<br />
steel<br />
− Phosphatised finish<br />
UNI-ISO 1173-1174<br />
DIN 7427<br />
n o Y q a L <br />
mm mm gr<br />
” ”<br />
1 1/4 1/4 13 26 20<br />
3 3/8 1/4 19 32 40<br />
4 3/8 5/16 19 37 40<br />
6 1/2 5/16 25 40 85<br />
685 A<br />
Bit-holders<br />
− Model with quickrelease<br />
sleeve for use<br />
of bits of the 660 and<br />
661 series on electric<br />
and pneumatic impact<br />
wrenches<br />
− Chrome Vanadium<br />
steel<br />
− Oiled sand-blasted<br />
finish with burnished<br />
check collar<br />
UNI-ISO 1173-1174<br />
DIN 3126<br />
n o Y q a L <br />
mm mm gr<br />
” ”<br />
1 1/4 1/4 14 30 22<br />
3 3/8 1/4 19 43 40<br />
4 3/8 5/16 20 50 70<br />
6 1/2 5/16 24 50 95<br />
656 1/4”<br />
UNI-ISO 1173 DIN 7431<br />
Bit-holder with<br />
Logic ADV` handle<br />
− Model with hexagonal<br />
shaped bolster<br />
− Bimaterial ergonomic grip<br />
− Chrome Vanadium<br />
steel body<br />
− Chrome-plated finish<br />
q a b L <br />
mm mm mm gr<br />
”<br />
1/4 103 11 220 140<br />
162
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
690 1/4” m f q<br />
Assortment in sheet-steel case (16 pcs.)<br />
a 235x90x35 mm 0,7 Kg<br />
pcs. description<br />
art./size<br />
5 bits for slot-head screws 660/0,6x4,5-0,8x5,5-1x5,5-<br />
1,2x6,5-1,6x8<br />
4 bits for PHILLIPS` 660 PH/0-1-2-3<br />
screws<br />
6 bits for Allen 660 E/2,5-3-4-5-6-8<br />
screws<br />
1 bit-holder with handgrip 656 1/4”<br />
658<br />
UNI-ISO 1173 DIN 3126<br />
Magnetic bit-holder<br />
with handgrip<br />
− Model with six bits<br />
housed in the handgrip:<br />
660 S/0,6x4,5-0,8x5,5-1,2x6,5 -<br />
660 SPH/1-2-3<br />
− Plastic handgrip<br />
− Chrome Vanadium steel<br />
− Chrome-plated finish<br />
q a b L <br />
mm mm mm gr<br />
”<br />
1/4 120 12 238 160<br />
658 TX l<br />
Magnetic bit-holder<br />
with handgrip<br />
− Model with six bits<br />
housed in the handgrip:<br />
660 TX/T10-T15-T20-<br />
T25-T30-T40<br />
− Plastic handgrip<br />
− Chrome Vanadium steel<br />
− Chrome-plated finish<br />
q a b L <br />
mm mm mm gr<br />
”<br />
1/4 120 12 238 160<br />
690 1/4” TX l*<br />
Assortment in sheet-steel case (12 pcs.)<br />
a 240x90x40 mm 0,6 Kg<br />
658 V<br />
Empty magnetic bit-holder<br />
pcs. description<br />
art./size<br />
4 TORX` bits 660 TX/T6-T7-T8-T9<br />
7 TORX` Tamper Resistant` 660 STX/T10-T15-T20-T25<br />
bits<br />
T27-T30-T40<br />
1 bit-holder with handgrip 656 1/4”<br />
163
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
691 AN m f q<br />
Assortment in plastic box (10 pcs.)<br />
a 115x52x20 mm 120 gr<br />
pcs. description<br />
art/size<br />
3 bits for slotted screws 660/0,6x4,5-0,8x5,5-1,2x6,5<br />
3 bits for PHILLIPS` 660 PH/1-2-3<br />
screws<br />
3 bitz for POZIDRIV`- 660 E/3-4-5<br />
SUPADRIV` screws<br />
1 magnetic bit-holder 672 MG<br />
adapter<br />
692 1/4” m f n<br />
Assortment in plastic box (7 pcs.)<br />
100 gr<br />
pcs. description<br />
art./size<br />
2 bits for slotted screws 660/0,8x5,5-1x6,5<br />
2 bits for PHILLIPS` 660 PH/1-2<br />
screws<br />
2 bits for POZIDRIV`- 660 PZ/1-2<br />
SUPADRIV` screws<br />
1 magnetic bit-holder 672 MG<br />
adapter<br />
691 NTX l<br />
Assortment in plastic box (10 pcs.)<br />
a 115x52x20 mm 120 gr<br />
pcs. description<br />
art/size<br />
9 bits for screws 660 TX/T8-T9-T10-T15-T20-<br />
T25-T27-T30-T40<br />
1 magnetic bit-holder 672 MG<br />
adapter<br />
692 1/4” TX l<br />
Assortimento in astuccio di plastica (7 pz)<br />
100 gr<br />
pcs. description<br />
art./size<br />
6 bits for screws 660 TX/T10-T15-T20-T25-<br />
T27-T30<br />
1 magnetic bit-holder 672 MG<br />
adapter<br />
164
<strong>SCREWDRIVERS</strong>, <strong>WRENCHES</strong> <strong>AND</strong> <strong>KEYS</strong><br />
695 1/2”<br />
Impact screwdriver<br />
− For loosening rusted or<br />
seized screws<br />
− Direction of torsion<br />
inverted by rotating the<br />
handgrip<br />
− Chrome Vanadium steel<br />
− Zinc-chrome plated finish<br />
L<br />
mm<br />
a<br />
mm<br />
<br />
gr<br />
145 34 730<br />
700 1/2”<br />
Assortment in sheet-steel case (6 pcs)<br />
a 200x65x35 mm 1,2 Kg<br />
pcs. description<br />
art./size<br />
1 impact screwdriver 695 1/2”<br />
1 socket adapter 685/6<br />
2 bits for slotted screws 661/1,2x8-1,6x10<br />
2 bits for PHILLIPS` 661 PH/2-3<br />
screws<br />
165
Change language