HEX ARMOR CATALOGUE
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ENGINEERED<br />
safe
877.MY<strong>ARMOR</strong> | hexarmor.com
Table of Contents<br />
Section Color<br />
4–11<br />
12<br />
13–15<br />
16–18<br />
19–22<br />
23–33<br />
34–37<br />
38–39<br />
40–49<br />
Technologies<br />
HexDri ®<br />
GGT5 ® Series<br />
Rig Lizard ® Series<br />
EXT Rescue Series<br />
Chrome Series ® Mechanic’s<br />
Chrome Core <br />
NXT Series<br />
Needlestick<br />
50–56 9000 Series <br />
57–61 2000 Series <br />
62–68 Heavy Duty<br />
69–80 Arm and Body Protection<br />
81–83 Resources<br />
Pocket Catalog l Page 3
SuperFabric ® Brand Materials<br />
HexArmor ® has partnered with HDM Inc. to design<br />
technologies with unique capabilities, including industryleading<br />
cut, puncture, and needle resistance. SuperFabric ®<br />
technology, by HDM Inc., is a finishing process that takes<br />
ordinary fabrics and transforms them into high-performance<br />
fabric. These new protective fabrics are engineered for<br />
optimum resistance to abrasions, lacerations, and punctures,<br />
while remaining highly flexible.<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Performance Advantage<br />
UNBEATABLE CUT RESISTANCE<br />
• Exceeds ASTM/ISEA and CE Level 5<br />
• Shielding effect keeps sharp hazards<br />
(metal, blades, glass) from slipping between<br />
fibers and causing injury<br />
• Won’t snag or abrade like typical fiberbased<br />
cut-resistant products<br />
INDUSTRIAL PUNCTURE RESISTANCE<br />
• Guardplates act as a shield from punctures,<br />
deflecting and blocking hazards<br />
• Spacing between guardplates provides<br />
flexibility and breathability<br />
INDUSTRY-LEADING NEEDLE RESISTANCE<br />
• Layered guard plates arrest, trap,<br />
and block needles and other hazards<br />
UNMATCHED ABRASION RESISTANCE<br />
• Incredibly high abrasion resistance,<br />
outlasting competitors and providing<br />
protection longer into product life<br />
• Longer durability means better ROI and<br />
higher performance later in product life<br />
Pocket Catalog l Page 5
Cut Injury<br />
Skin Surface<br />
Puncture Resistance<br />
HexArmor ® Synthetic Leather Gloves<br />
with SuperFabric ® Guard Plates<br />
Cut/Puncture Hazard<br />
Outer Shell<br />
® Plates<br />
Skin Surface<br />
HexArmor ® Synthetic Leather Gloves<br />
with SuperFabric ® Guard Plates<br />
Cut/Gashing Hazard<br />
Outer Shell<br />
® Plates<br />
Skin Surface<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Needlestick Resistance<br />
Three layers of SuperFabric ® brand materials create<br />
the only proven needlestick protection available today.<br />
Our needlestick-resistant products do more than simply<br />
pass industry-accepted testing methods; we have put them<br />
through real-world applications countless times, with a<br />
history of undeniable success.<br />
TruShield ® Technology<br />
TruShield ® performance means<br />
Cut/Puncture Hazard<br />
you’re getting the highest rated<br />
Fiber Windowing<br />
hand Cut Injury shield on the market–<br />
armor for your hands.<br />
Reduces ability of sharp hazards<br />
Fabric Shell<br />
to slip between Hand fibers and cut/<br />
puncture the hand<br />
Standard Knit Gloves<br />
Cut/Puncture Hazard<br />
SuperFabric ® Armor Plates<br />
Coretek ® Shell<br />
Hand<br />
Gloves with<br />
Protection<br />
Pocket Catalog l Page 7
IR-X ® Impact Exoskeleton <br />
The most advanced HexArmor ® impact resistance comes with<br />
all the dexterity, all the comfort, and more protection than<br />
offered by any other impact-protective glove on the market.<br />
Our proprietary IR-X ® technology shields our gloves with a<br />
full back-of-hand exoskeleton, so every joint and knuckle is<br />
protected from debilitating blows. In addition to being 42%<br />
taller than competitive impact guards, IR-X ® smash guards are<br />
purpose-built to deflect the force of sudden impacts away from<br />
the impact point, rather than transferring force directly to the<br />
hand. This unique characteristic is what sets IR-X ® safety levels<br />
higher than the competition, and its flexibility is what makes<br />
the IR-X ® Impact Exoskeleton more comfortable and more<br />
dexterous than any other impact-resistant technology available.<br />
IMPACT TESTING<br />
Resiliency of a material can be described as its ability to absorb<br />
and release energy elastically, rather than simply transferring<br />
energy directly through the material. The lower the tested<br />
resiliency value, the more energy is transferred through the<br />
material and into the hand during an impact blow.<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
hand<br />
bone<br />
HexArmor ® IR-X ® impact Guards<br />
42% TALLER GUARDS<br />
impact<br />
guards<br />
Glove shell<br />
hand<br />
bone<br />
• HexArmor IR-X ® Impact Guards are 42% taller than most<br />
competitive impact guards, creating an even greater barrier<br />
between your hand and impact injuries<br />
• HexArmor IR-X ® Impact Guards cover the entire back<br />
of the hand, including the knuckles and fingers where<br />
the majority of impacts occur<br />
Pocket Catalog l Page 9
THE BEST PROTECTION IN THE INDUSTRY– HANDS DOWN.<br />
The superior safety standards for which HexArmor ® is known,<br />
and the flagship of the HexArmor ® name, Elite products are the<br />
proven industry leader in cut, puncture, and needle resistance.<br />
HexArmor Elite ® products are purpose-built for the most<br />
hazardous and unpredictable work environments. Every Elite<br />
product employs our proprietary SuperFabric ® brand material,<br />
which provides the highest standards of safety available on<br />
the market; Level 5 ISEA/CE cut protection, industrial puncture<br />
resistance, and proven needle protection. These standards<br />
are what set HexArmor ® apart as the trusted advisor for the<br />
hand and arm safety industry.<br />
HexArmor Elite ® incorporates the safest HexArmor ®<br />
technologies. We ensure that our users are never without the<br />
defense they need to perform their tasks at the safest level.<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
SAFETY EQUIPMENT MADE FOR THE TASK AT HAND.<br />
Not all applications require the maximum level of cut and<br />
puncture, and impact protection. HexArmor Red ® products are<br />
purpose-built for the most specific safety hazards. As part of<br />
our mission to be the trusted advisor in hand and arm safety,<br />
we created Red products to give our users the exact protection<br />
they need, when and where they need it.<br />
HexArmor Red ® products offer Level 3 and Level 4 cut<br />
and industrial puncture resistance, as well as an array<br />
of other protective features, from fire and cold resistance,<br />
to impact and abrasion – all distinctively modeled for<br />
individual tasks and hazards.<br />
Red products are created with the same HexArmor ® quality<br />
and workmanship you have come to expect from the safety<br />
industry’s trusted advisor.<br />
Pocket Catalog l Page 11
HexDri ® 2180<br />
• Patented H30 ® technology keeps hands dry<br />
• 360° waterproof barrier outside improves tactile fit and feel<br />
• Breathable back of hand provides increased comfort<br />
• Wrinkle rubber latex palm for better grip in wet applications<br />
• Hi-vis color scheme increases visual awareness<br />
• Machine washable<br />
Available in sizes 7/S–11/XXL<br />
In stock Q3, 2013<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
GGT5 ® Gator Grip 4020X<br />
• Gator Grip displaces and<br />
prevents formation of oil<br />
film in saturated situations<br />
• Durable TP-X ® thumb/index saddle<br />
reinforcement<br />
• IR-X ® Impact Exoskeleton <br />
• All seams implement a double<br />
stitched core-spun thread<br />
Available in sizes 7/S–12/3XL<br />
ISEA<br />
CUT: 5<br />
4542<br />
Impact Protection<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 13
GGT5 ® Mud Grip 4021X<br />
• Mud Grip synthetic leather palm<br />
with PVC dots works well with<br />
light/medium oil based muds<br />
• Durable TP-X ® palm reinforcement<br />
• IR-X ® Impact Exoskeleton <br />
• All seams implement a double<br />
stitched core-spun thread<br />
Available in sizes 7/S–12/3XL<br />
ISEA<br />
CUT: 5<br />
4544<br />
Impact Protection<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
GGT5 ® Arctic Gator ® 4031<br />
• H2X and C40 Thinsulate <br />
interior liners for waterproof<br />
and cold resistance<br />
• Durable TP-X ® palm<br />
• IR-X ® Impact Exoskeleton <br />
• Exterior seams implement a<br />
double stitched core-spun thread<br />
Available in sizes 7/S–12/3XL<br />
ISEA<br />
CUT: 5<br />
4543<br />
Impact Protection<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 15
Rig Lizard ® 2021<br />
• Durable TP-X ® palm<br />
• IR-X ® Impact Exoskeleton <br />
with additional IR-X ® guard<br />
between thumb and index finger<br />
• Reinforced index finger and<br />
thumb saddle extends glove life<br />
Available in sizes 6/XS–12/3XL<br />
ISEA<br />
CUT: 3<br />
4243<br />
Impact Protection<br />
TP-X ®<br />
Technology<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Rig Lizard Oasis ® 2022<br />
• Advanced HexVent ® nylon allows<br />
for a breathable heat-release system<br />
• Durable TP-X ® palm<br />
• IR-X ® Impact Exoskeleton<br />
with additional IR-X ® guard<br />
between thumb and index finger<br />
• Reinforced index finger and<br />
thumb saddle extends glove life<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 3<br />
4243<br />
Impact Protection<br />
TP-X ®<br />
Technology<br />
Pocket Catalog l Page 17
Rig Lizard Arctic 2023<br />
• H2X and C40 Thinsulate <br />
interior liners for waterproof<br />
and cold resistance<br />
• Durable TP-X ® palm<br />
• IR-X ® Impact Exoskeleton<br />
with additional IR-X ® guard<br />
between thumb and index finger<br />
• Reinforced index finger and<br />
thumb saddle extends glove life<br />
ISEA<br />
CUT: 3<br />
4244<br />
Available in sizes 7/S–12/3XL<br />
Impact Protection<br />
TP-X ®<br />
Technology<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
EXT Rescue 4011<br />
• Durable TP-X ® palm reinforcement<br />
• IR-X ® Impact Exoskeleton <br />
• Synthetic leather palm and<br />
PVC-print provide reliable grip<br />
in dry or light oil situations<br />
• Breathable Airprene cuff<br />
with Velcro ® closure<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 5<br />
TP-X ® PATCHES<br />
4533 4544<br />
Impact Protection<br />
SuperFabric ®<br />
Protection Zone<br />
TP-X ® Patches<br />
Pocket Catalog l Page 19
EXT Rescue 4012<br />
• Reinforced index finger and thumb<br />
saddle with TP-X ® extends glove life<br />
• Superior back-of-hand impact<br />
protection system utilizes an<br />
advanced design to dissipate<br />
forceful blows over a large area<br />
• Hi-Vis elastic cuff with<br />
Velcro ® closure<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 5<br />
4521<br />
Impact Protection<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
EXT Rescue 4013<br />
• Durable TP-X ® palm<br />
and fingertip reinforcement<br />
• Superior back-of-hand impact<br />
protection system utilizes an<br />
advanced design to dissipate<br />
forceful blows over a large area<br />
• SlipFit ® and anti-debris cuff assists<br />
a quick on and off between tasks<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 5<br />
TP-X ® PATCHES<br />
4521 4532<br />
Impact Protection<br />
SuperFabric ®<br />
Protection Zone<br />
TP-X ® Patches<br />
Pocket Catalog l Page 21
EXT Rescue 4014 Barrier<br />
• H2X waterproof barrier (interior<br />
liner) meets ASTM F1670/F1671 for<br />
bloodborne pathogen resistance<br />
and fluid-borne viral resistance<br />
• Superior back-of-hand impact<br />
protection system utilizes an<br />
advanced design to dissipate<br />
forceful blows over a large area<br />
• Slipfit ® cuff with Velcro ® closure<br />
Available in sizes 7/S–12/3XL<br />
ISEA<br />
CUT: 5<br />
Impact Protection<br />
PENDING<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Mechanic’s+ 4018<br />
• Industrial puncture protection on<br />
enhanced areas from wires,<br />
metal, wood, and glass<br />
• Synthetic leather palm<br />
• Cut and abrasion-resistant<br />
knuckle patch<br />
Available in sizes 6/XS–12/3XL<br />
ISEA<br />
CUT: 5<br />
4522<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 23
Mechanic’s+ 4019<br />
• PVC-printed synthetic leather palm<br />
• Conducive filaments in thumb<br />
and index fingertip allow for the<br />
use of touchscreen systems<br />
• Back of thumb serves as a<br />
convenient brow cloth<br />
• Cut and abrasion-resistant<br />
knuckle patch<br />
• SlipFit ® style cuff<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 5<br />
SuperFabric ®<br />
Protection Zone<br />
PENDING<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Chrome Series ® 4022<br />
• Oil-resistant synthetic<br />
leather palm with PVC grip<br />
• Cut and abrasion-resistant<br />
knuckle patch<br />
• Airprene cuff with Velcro ® closure<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 5<br />
4521<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 25
Chrome Series ® 360˚ 4023<br />
• 360˚ cut resistance<br />
• Oil-resistant synthetic<br />
leather palm with PVC grip<br />
• Cut and abrasion-resistant<br />
knuckle patch<br />
• Airprene cuff with Velcro ® closure<br />
Available in sizes 7/S–12/3XL<br />
ISEA<br />
CUT: 5<br />
4521<br />
2 Layers<br />
SuperFabric ® Protection<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Chrome Series ® 4024<br />
• Superior back-of-hand impact<br />
protection system utilizes an<br />
advanced design to dissipate<br />
forceful blows over a large area<br />
• Padded palm reduces vibration<br />
damage while returning a higher<br />
level of comfort<br />
• Oil-resistant synthetic<br />
leather palm with PVC grip<br />
Available in sizes 6/XS–11/XXL<br />
ISEA<br />
CUT: 5<br />
Impact Protection<br />
4532<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 27
Chrome Series ® 360˚ 4025<br />
• 360˚ cut resistance<br />
• Superior back-of-hand impact<br />
protection system utilizes an<br />
advanced design to dissipate<br />
forceful blows over a large area<br />
• Oil-resistant synthetic<br />
leather palm with PVC grip<br />
• Elastic cuff with Velcro ® closure<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 5<br />
4521<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Chrome Series ® 4026<br />
• Oil-resistant synthetic<br />
leather palm with PVC<br />
dots for maximum grip<br />
• Superior back-of-hand impact<br />
protection system utilizes an<br />
advanced design to dissipate<br />
forceful blows over a large area<br />
• Hi-Vis coloring with reflective strip<br />
• Elastic cuff with Velcro ® closure<br />
Available in sizes 6/XS–12/3XL<br />
ISEA<br />
CUT: 5<br />
Impact Protection<br />
4521<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 29
Chrome Series ® SlipFit ® 4028<br />
• Superior back-of-hand impact<br />
protection system utilizes an<br />
advanced design to dissipate<br />
forceful blows over a large area<br />
• Oil-resistant synthetic<br />
leather palm with PVC grip<br />
• SlipFit ® style cuff<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 5<br />
4521<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Chrome Series Oasis 4030<br />
• Advanced HexVent ® nylon allows<br />
for a breathable heat-release system<br />
• Printed PVC synthetic leather<br />
palm provides reliable grip in<br />
dry or light oil situations<br />
• Reinforced index finger and<br />
thumb saddle extends glove life<br />
Available in sizes 7/S–12/3XL<br />
ISEA<br />
CUT: 5<br />
4521<br />
Impact Protection<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 31
Chrome Series ® Waterproof 4036<br />
• H2X liner creates a<br />
waterproof layer of defense<br />
against wet hazards<br />
• Durable TP-X ® palm<br />
• Superior back-of-hand impact<br />
protection system utilizes an<br />
advanced design to dissipate<br />
forceful blows over a large area<br />
• All seams implement a double<br />
stitched core-spun thread<br />
Available in sizes 7/S–12/3XL<br />
ISEA<br />
CUT: 5<br />
Impact Protection<br />
4532<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Chrome Series ® 4039<br />
• Nitrile palm<br />
• Superior back-of-hand impact<br />
protection system utilizes an<br />
advanced design to dissipate<br />
forceful blows over a large area<br />
• Slipfit ® style cuff<br />
Available in sizes 6/XS–12/3XL<br />
ISEA<br />
CUT: 5<br />
PENDING<br />
Impact Protection<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 33
Chrome Core 4032<br />
• SuperFabric ® brand materials offer<br />
Level 5 cut resistance without<br />
sacrificing comfort or dexterity<br />
• Synthetic leather palm exterior<br />
adds superior wet/dry grip<br />
and abrasion resistance<br />
• Airprene cuff with Velcro ® closure<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 5<br />
4521<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Chrome Core 4033<br />
• SuperFabric ® brand materials offer<br />
Level 5 cut resistance without<br />
sacrificing comfort or dexterity<br />
• Synthetic leather palm exterior<br />
adds superior wet/dry grip<br />
and abrasion resistance<br />
• SlipFit ® style cuff<br />
• Hi-Vis color scheme<br />
increases visual awareness<br />
ISEA<br />
CUT: 5<br />
4521<br />
Available in sizes 7/S–11/XXL<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 35
Chrome Core 4034<br />
• SuperFabric ® brand materials offer<br />
Level 5 cut resistance without<br />
sacrificing comfort or dexterity<br />
• Partial fingers on index, middle, and<br />
thumb for high dexterity applications<br />
• Synthetic leather palm exterior<br />
adds superior wet/dry grip<br />
and abrasion resistance<br />
• SlipFit ® style cuff<br />
ISEA<br />
CUT: 5<br />
4521<br />
Available in sizes 7/S–11/XXL<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Chrome Core Oasis 4035<br />
• SuperFabric ® brand materials offer<br />
Level 5 cut resistance without<br />
sacrificing comfort or dexterity<br />
• Advanced HexVent ® nylon allows<br />
for a breathable heat-release system<br />
• Synthetic leather palm exterior<br />
adds superior wet/dry grip<br />
and abrasion resistance<br />
• SlipFit ® style cuff<br />
ISEA<br />
CUT: 5<br />
4511<br />
Available in sizes 7/S–11/XXL<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 37
nxt 10-302<br />
• Meets European food<br />
migration testing (EN 11<br />
86:2002 SI 1998 No 1376)<br />
• Shielding design reduces<br />
ability of sharp objects to<br />
penetrate and cause injury<br />
• Coretek ® fiber keeps hands cool<br />
and comfortable while providing<br />
best-in-class dexterity<br />
• Ambidextrous, sold in eaches<br />
ISEA<br />
CUT: 1<br />
414X<br />
Available in sizes 5/XXS–12/3XL<br />
Coretek ® Fiber<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
nxt 10-306/10-307<br />
• Shielding design reduces<br />
ability of sharp objects to<br />
penetrate and cause injury<br />
• Coretek ® fiber keeps hands cool<br />
and comfortable while providing<br />
best-in-class dexterity<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 1<br />
4543<br />
Coretek ® Fiber<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 39
the NEW ASTM F2878 needle TEST<br />
HexArmor ® has long understood the shortcomings of puncture<br />
tests and has been using a modified ASTM 1342 test with 25<br />
gauge hypodermic needles. With the new ASTM F2878 test,<br />
we are now able to standardize testing based on international<br />
standards.<br />
THE RESULTS<br />
We tested our needlestick and puncture resistant gloves, as<br />
well as competitive gloves, using the ASTM F2878 methodology<br />
producing the results on the chart below:<br />
grams of needle resistance<br />
grams of needle resistance<br />
300 300<br />
250 250<br />
200 200<br />
150 150<br />
100 100<br />
50 50<br />
0 0<br />
10g 10g kevlar ® ®<br />
interlock<br />
wrinkle<br />
1.4mm split split<br />
(non-coated)<br />
cotton<br />
rubber kevlar cow cow leather<br />
specimen<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
OVERVIEW OF THE ASTM F2878 TEST<br />
• Testing can be done using a 21G, 25G or 28G needle<br />
• The tests below used a 25G needle<br />
• Puncture probe (25G needle) travels at a 90˚ angle into a<br />
specimen at a velocity of 500mm/min<br />
• Amount of force necessary to puncture through the material/<br />
specimen is recorded in Newtons* to the nearest .01 N<br />
• This test is done 12 times for every material/specimen<br />
• The average of the 12 results is reported<br />
*The Newton is the Standard International unit of force. One Newton is the force<br />
required to cause a mass of one kilogram to accelerate at a rate of one meter<br />
per second squared in the absence of other force-producing effects. We have<br />
converted Newton’s to grams.<br />
3.0 3.0<br />
2.0 2.0<br />
1.0 1.0<br />
newtons<br />
newtons<br />
0 0<br />
turtleskin<br />
picguard hexarmor ® ®<br />
hexarmor ® ®<br />
insider<br />
7082 7082 9014 9014<br />
Pocket Catalog l Page 41
SharpsMaster II ® 9014<br />
• Single-glove needle solution with<br />
incredible dexterity and comfort<br />
• Wrinkle rubber palm coating with<br />
Actifresh anti-microbial treatment<br />
Available in sizes 7/S–10/XL<br />
Fingertip<br />
Wrap<br />
Wrap<br />
4544<br />
3 Layers<br />
SuperFabric ® Protection<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
SharpsMaster HV 7082<br />
• Single-glove needle solution with<br />
incredible dexterity and comfort<br />
• Flat nitrile three-quarter knuckle dip<br />
Available in sizes 7/S–10/XL<br />
4533<br />
3 Layers<br />
SuperFabric ® Protection<br />
Pocket Catalog l Page 43
PointGuard ® X 6044<br />
• Recommended use as an underglove<br />
solution with appropriate<br />
top-glove combination<br />
4523<br />
• Lightweight spandex<br />
shell with elastic wrist<br />
Available in sizes 5/XXS–11/XXL<br />
3 Layers<br />
SuperFabric ® Protection<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Hercules NSR 3041<br />
• Full coverage design and<br />
pre-curved shape for maximum<br />
comfort and ultimate protection<br />
4522<br />
• Specialized silicone<br />
gripping surface on palm<br />
Available in sizes 7/S–11/XXL<br />
2 Layers<br />
SuperFabric ® Protection<br />
3 Layers<br />
SuperFabric ® Protection<br />
Pocket Catalog l Page 45
NSR 4041<br />
• Improved fit and feel<br />
with memory span liner<br />
• Added back of hand knuckle<br />
padding for incidental bumps/impact<br />
• Larger silicone pattern<br />
for better grip<br />
Available in sizes 7/S–11/XXL<br />
4522<br />
3 Layers<br />
SuperFabric ® Protection<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
General Search and Duty 4045<br />
• AirMesh breathable back of hand<br />
• Airprene wrist band<br />
with velcro closure<br />
Available in sizes 7/S–11/XXL<br />
4532<br />
2 Layers<br />
SuperFabric ® Protection<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 47
Leather Tactical Enforcement 4046<br />
• Goat skin leather<br />
for tactile comfort<br />
• Kevlar ® liner for back<br />
of hand protection<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 3<br />
4512<br />
2 Layers<br />
SuperFabric ® Protection<br />
Kevlar ® Liner<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
8” Arm Guard AG8TW<br />
• Won’t fall down like knit sleeves<br />
• Lightweight and cooler than knit<br />
or leather alternatives<br />
• Spandex wrist insert with<br />
thumb hole and snap fasteners<br />
Available in sizes 7/S–11/XXL<br />
4501<br />
2 Layers<br />
SuperFabric ® Protection<br />
Pocket Catalog l Page 49
9000 Series 9003<br />
• Industrial puncture protection<br />
on enhanced areas from wires,<br />
metal, wood, and glass<br />
• Cut-resistant HPPE blend shell<br />
• Polyurethane palm coating<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 4<br />
4543<br />
HPPE Blend Shell<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
9000 Series 9010<br />
• Industrial puncture protection<br />
on enhanced areas from wires,<br />
metal, wood, and glass<br />
• Cut-resistant HPPE blend shell<br />
• Flat nitrile palm coating<br />
Available in sizes 6/XS–11/XXL<br />
ISEA<br />
CUT: 4<br />
4544<br />
HPPE Blend Shell<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 51
9000 Series 9009<br />
• Industrial puncture protection<br />
on enhanced areas from wires,<br />
metal, wood, and glass<br />
• Cut-resistant HPPE blend shell<br />
• Recommended use as an<br />
underglove solution<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 4<br />
4541<br />
HPPE Blend Shell<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
9000 Series 9011<br />
• Industrial puncture protection<br />
on enhanced areas from wires,<br />
metal, wood, and glass<br />
• Comfortable cotton blend shell<br />
with wrinkle rubber palm coating<br />
Available in sizes 7/S–11/XXL<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 53
9000 Series 9012<br />
• Industrial puncture protection<br />
on enhanced areas from wires,<br />
metal, wood, and glass<br />
• Cut-resistant DuPont Kevlar ® shell<br />
with wrinkle rubber palm coating<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 3<br />
4544<br />
DuPont Kevlar ®<br />
Protective Shell<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
9000 Series 9013<br />
• Industrial puncture protection<br />
on enhanced areas from wires,<br />
metal, wood, and glass<br />
• Cut-resistant HPPE blend shell<br />
• Sandy nitrile palm coating<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 4<br />
4543<br />
HPPE Blend Shell<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 55
9000 Series 9015/9016<br />
• Industrial puncture protection<br />
on enhanced areas from wires,<br />
metal, wood, and glass<br />
• Cut-resistant HPPE blend shell<br />
• Wrinkle rubber palm coating (9015)<br />
• Foam nitrile palm coating (9016)<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 4<br />
4543<br />
HPPE Blend Shell<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
2000 Series 2080<br />
• Shell is comprised of a 13-gauge<br />
Kevlar ® and steel blend<br />
• Foam nitrile palm dip<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 4<br />
4542<br />
CPPT Gram Cut Score 3103 G<br />
Performance gram force may vary 10%,<br />
lab-to-lab scores also vary<br />
Pocket Catalog l Page 57
2000 Series 2081<br />
• Shell is comprised of a 13-gauge<br />
Kevlar ® and steel blend<br />
• Black wrinkle rubber latex<br />
three-quarter knuckle dip<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 4<br />
4532<br />
CPPT Gram Cut Score 3284 G<br />
Performance gram force may vary 10%,<br />
lab-to-lab scores also vary<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
2000 Series Flame-Resistant 2082<br />
• Shell is comprised of a flame-resistant<br />
blend of 13-gauge Kevlar ® and wool<br />
• FR-compliant palm dip<br />
• Hazard risk category HRC 1<br />
Arc Flash protection<br />
ATPV 7.7 cal/cm2, as per ASTM international draft<br />
standard test method: Work item F18.65 WK14928,<br />
determining arc flash rating of hand protective devices<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 3<br />
EN388<br />
EN407<br />
3543 412210<br />
CPPT Gram Cut Score 1204 G<br />
Performance gram force may vary 10%,<br />
lab-to-lab scores also vary<br />
Pocket Catalog l Page 59
2000 Series 2085<br />
• Shell is comprised of a 13-gauge<br />
high-performance polyethylene<br />
and glass fiber blend<br />
• Gray polyurethane palm dip<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 4<br />
PENDING<br />
CPPT Gram Cut Score 1516 G<br />
Performance gram force may vary 10%,<br />
lab-to-lab scores also vary<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
2000 Series 2086/2087<br />
• Shell is comprised of a 13-gauge<br />
high-performance polyethylene<br />
and glass fiber blend<br />
• Black latex palm dip (2086)<br />
• Black foam nitrile palm dip (2087)<br />
Available in sizes 7/S–11/XXL<br />
ISEA<br />
CUT: 4<br />
PENDING<br />
CPPT Gram Cut Score<br />
1527 G (2086), 1509 G (2087)<br />
Performance gram force may vary 10%,<br />
lab-to-lab scores also vary<br />
Pocket Catalog l Page 61
SteelLeather ® III 5033<br />
• Industrial puncture protection on<br />
enhanced areas from wires,<br />
metal, wood, and glass<br />
4533<br />
• Premium cow grain leather<br />
that will outlast your typical<br />
leather driver’s gloves<br />
Available in sizes 6/XS–12/3XL<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
SteelLeather ® IX 5039<br />
• Industrial puncture protection on<br />
enhanced areas from wires,<br />
metal, wood, and glass<br />
4544<br />
• Premium split cow leather<br />
that will outlast your typical<br />
leather driver’s gloves<br />
• Canvas safety cuff<br />
Available in sizes 7/S–11/XXL<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 63
BigJake Premium 5040/5041<br />
• Industrial puncture protection on<br />
enhanced areas from wires,<br />
metal, wood, and glass<br />
4544<br />
• Classic BigJake cowhide leather<br />
feel with critical seams reinforced<br />
along thumb and bottom edge for<br />
extra protection<br />
• Canvas safety cuff: 5040 (2 ¾”),<br />
5041 (4 ½”)<br />
Available in sizes:<br />
(5040) 7/S–11/XXL<br />
(5041) 8/M–11/XXL<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Hercules 400R6E<br />
• Industrial puncture protection on<br />
enhanced areas from wires,<br />
metal, wood, and glass<br />
• Gauntlet design and pre-curved<br />
shape for maximum comfort and<br />
ultimate protection<br />
• Specialized silicone gripping<br />
surface on palm<br />
4533<br />
Available in sizes 8/M–11/XXL<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 65
TenX Threesixty 7090<br />
• Industrial puncture protection on<br />
enhanced areas from wires,<br />
metal, wood, and glass<br />
4544<br />
• Canvas safety cuff<br />
• Particle nitrile coating for liquid and<br />
chemical resistance<br />
• Updated construction with increased<br />
dexterity, better fit and feel<br />
Available in sizes 7/S–10/XL<br />
Protective Shell<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
BladeMaster ® Ultimate 8020<br />
• Industrial puncture protection on<br />
enhanced areas from wires,<br />
metal, wood, and glass<br />
• 7G Kevlar ® knit shell<br />
• Cut and abrasion-resistant<br />
knuckle patch<br />
• Leather reinforced palm for<br />
added cushion and grip<br />
Available in sizes 7/S–11/XXL<br />
Protective Shell<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 67
Hotmill 8100/HWT 8100<br />
• 360˚ Level 5 cut resistance<br />
• Rates CE Level 2 for contact<br />
heat, up to 250°C<br />
• Level 5 ISEA 105 in accordance with<br />
ASTM 1776, 320˚C (HWT8100)<br />
• 13oz cotton shell<br />
• Burlap lining (HWT8100)<br />
• Extended canvas cuff for easy removal<br />
8100 HWT8100<br />
Available in sizes 8/M–10/XL<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
PentaArmor ® Sleeve 1010<br />
• 8x more cut resistance than Kevlar ®<br />
• Elastic thumb loop and sleeve clip<br />
keeps sleeve from falling<br />
• Lightweight, cooler, and more<br />
comfortable than knit or<br />
leather alternatives<br />
• Hi-Vis color scheme<br />
increases visual awareness<br />
• Made in USA<br />
Available in sizes 7/S–10/XL<br />
4521<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 69
9” Arm Guard AG10009S<br />
• Industrial puncture protection on<br />
enhanced areas from wires,<br />
metal, wood, and glass<br />
4532<br />
• Won’t fall down like knit sleeves<br />
• Lightweight and cooler than knit or<br />
leather alternatives<br />
• Spandex wrist insert with thumb hole<br />
• Made in USA<br />
Available in sizes 6/XS–11/XXL<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
19” Arm Sleeve AS019S<br />
• Industrial puncture protection on<br />
enhanced areas from wires,<br />
metal, wood, and glass<br />
4532<br />
• Won’t fall down like knit sleeves<br />
• Lightweight and cooler than knit or<br />
leather alternatives<br />
• Neoprene thumb loop and clip<br />
keeps sleeve from falling down<br />
• Made in USA<br />
Available in sizes 7/S–12/3XL<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 71
HexMat 9905/9907<br />
• Industrial cut and puncture protection<br />
• Pliable material fits anywhere<br />
• Available in sizes 20”x 45”<br />
(9905), 50”x 30”(9907)<br />
• Made in USA<br />
Available in two sizes:<br />
20”x 45” (9905), 50”x 30” (9907)<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
Leg Gaitors 9921<br />
• Front-to-back leg coverage with<br />
high cut and abrasion resistance<br />
• Reflective strip for visibility<br />
in low light situations<br />
• Additional layer options<br />
available upon request<br />
• Made in USA<br />
Available in sizes 7/S–12/3XL<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 73
Chaps 9911/9915/9919<br />
• Front-to-back leg coverage with<br />
high cut and abrasion resistance<br />
• Single layer (9915)<br />
• Double layer protection (9919)<br />
• Three layers of protection<br />
on knee (front only, 9911)<br />
• Reflective strip for visibility<br />
in low light situations<br />
• Made in USA<br />
Available in sizes 7/S–12/3XL<br />
CHAPS 9911/9915 CHAPS 9919<br />
4532 4534<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
HexJacket HAJ01/HAJ02<br />
• Torso protection with high cut<br />
and abrasion resistance<br />
• Heavy duty double layer (HAJ02)<br />
• Also available in hi-vis<br />
• Made in USA<br />
Available in sizes 7/S–12/3XL<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 75
20” x 29” ap229/ap102229<br />
• Innovative industrial puncture<br />
protection on enhanced areas from<br />
wires, metal, wood, and glass<br />
AP229<br />
AP102229<br />
4532 4534<br />
• Medium weight (single layer AP229)<br />
• Heavy duty (double layer AP102229)<br />
• Made in USA<br />
One size fits most<br />
SuperFabric ®<br />
Protection Zone<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
24” x 30” ap321/ap322<br />
• Innovative industrial puncture<br />
protection on enhanced areas from<br />
wires, metal, wood, and glass<br />
AP322<br />
4534<br />
• Medium weight (single layer AP321)<br />
• Heavy duty (double layer AP322)<br />
• Made in USA<br />
One size fits most<br />
SuperFabric ®<br />
Protection Zone<br />
Pocket Catalog l Page 77
36” ap361<br />
• Innovative industrial puncture<br />
protection on enhanced areas from<br />
wires, metal, wood, and glass<br />
4532<br />
• Heavy Duty (double layer belly patch)<br />
• Made in USA<br />
One size fits most<br />
SuperFabric ®<br />
Protection Zone<br />
2 Layers<br />
SuperFabric ® Protection<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
20” x 22” AP102222<br />
• Innovative industrial puncture<br />
protection on enhanced areas from<br />
wires, metal, wood, and glass<br />
• Heavy duty (double layer)<br />
• Made in USA<br />
One size fits most<br />
2 Layers<br />
SuperFabric ® Protection<br />
Pocket Catalog l Page 79
24”x 38” ap382<br />
• Innovative industrial puncture<br />
protection on enhanced areas from<br />
wires, metal, wood, and glass<br />
4534<br />
• Heavy duty (double layer)<br />
• Made in USA<br />
One size fits most<br />
2 Layers<br />
SuperFabric ® Protection<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
BE SMART ABOUT PPE TESTING<br />
Real-world applications are different from cut tests<br />
done in a lab. Even cut tests may vary, using different<br />
methods, producing different results.<br />
When people hear the words “cut and punctureresistant,”<br />
most will have a tendency to want to do<br />
their own informal testing. Often they will put the glove<br />
on a hard flat surface and run a sharp instrument over<br />
the surface of the glove to test for cut resistance. We<br />
do not encourage customers to test in this manner.<br />
Although testing with a knife or other sharp object on a<br />
hard surface like a table may seem like a good testing<br />
method, in reality it is not and has little resemblance to<br />
real-world applications.<br />
Each HexArmor ® product is unique, with unique cut,<br />
puncture, tear, and abrasion properties. We encourage<br />
testing using actual hazards in a manner that best<br />
represents real-world situations, WITHOUT anyone’s<br />
hand in the glove. If you have any questions or would<br />
like to talk to us about testing, please contact us:<br />
Call 1-877-MY <strong>ARMOR</strong> or visit hexarmor.com<br />
Pocket Catalog l Page 81
MAKING SENSE OF CUT LEVELS<br />
Not all cut testing is equal. The chart below illustrates the<br />
performance characteristics of common “cut-resistant”<br />
technologies taken from the ASTMF1790 method for testing cut<br />
resistance. As you can see, HexArmor ® products perform above<br />
the industry standard, and blow away the competition.<br />
grams of cut resistance<br />
4500<br />
4000<br />
3500<br />
3000<br />
2500<br />
2000<br />
1500<br />
1000<br />
500<br />
U.S. Standard - ansi/isea levels<br />
CE-EN388 ISO 13997, Levels 4–5<br />
Resistance Converted to Grams<br />
CE-EN388 Coup Test, Levels 0–3<br />
Approximate Resistance Converted to Grams<br />
0<br />
level 1 level 2 level 3<br />
cut level<br />
877.MY<strong>ARMOR</strong> | hexarmor.com
TM<br />
TM<br />
HOW CAN WE PROTECT EMPLOYEES?<br />
Many injuries can happen with PPE rated in the range below<br />
ASTM/ISEA level 5 of 3500+ grams (35 Newtons). As a result,<br />
many of our customers have adopted standards in their own<br />
organization, specifying a minimum cut number such as 1500<br />
to 3500 grams- level 4 ASTM. Keep in mind the standard<br />
is just a guide, the profile of the hazard and actual use<br />
conditions are paramount. We always encourage conducting<br />
a safe test in actual situations; new gloves, used gloves,<br />
saturation with oils and fluids, etc.<br />
For more information, visit hexarmor.com/testing<br />
level 4 level 5<br />
*Testing done through all materials on palm, including added patches<br />
*Bar represents minimum gram rating to achieve each level.<br />
Pocket Catalog l Page 83
Call 1-877-MY <strong>ARMOR</strong> or visit hexarmor.com<br />
HexArmor ® products are cut and puncture resistant, NOT CUT AND PUNCTURE<br />
PROOF. Do not use with moving or serrated blades or tools. User shall be<br />
exclusively responsible to assess the suitability of the product as specified for<br />
any individual application or use. Protection zones are to be used as a general<br />
guide. Actual product protection zones may differ.<br />
Protected by patents and patents pending.<br />
SuperFabric ® is a registered trademark of HDM, Inc.<br />
All products, product descriptions, and performance scores<br />
are current as of May 2013. For current product information,<br />
please visit hexarmor.com, or call 1-877-MY <strong>ARMOR</strong><br />
HC-0003<br />
877.MY<strong>ARMOR</strong> | hexarmor.com