Unicenter CA-Scheduler Job Management for VSE User Guide

3.2 Defining Optional Schedule Records
EXITPARM
VERIFY
EXITPARM adjusts the default class or default
average processing time of all jobs in this schedule
during simulation. Unicenter CA-Scheduler passes
this value of up to 16 bytes to a user exit.
Requires a specific response. Your choices are to
leave the field blank, or type in YES or NO. Use this
field for anything you want by setting up your own
standard for this field.
Next, create the information record shown preceding. As you tab from field to
field, type in the data displayed on the panel preceding. After you have input
that information, you are ready to create the information record.
After you have filled in the panel, press Enter to save the information record
for that schedule. Unicenter CA-Scheduler confirms that it stored that
information by displaying the following panel:
SCHD-UTIL SCHDUTIL OUTPUT CA-SCHEDULER
===> MASTER - WR
CONNECT : 4
DEFINE SIR NAME=BACKUP,DESC='COPIES DATA SETS TO TAPE',
COMMENT='RERUN IF THIS ABENDS',NOTIFY='J SMITH',
RESP='J SMITH',DEST1='TAPE',DEST2='LIBRARY',
DEL1='BACKUP TAPES'
CACU18I SIR BACKUP HAS BEEN ADDED
PF1=HELP
To view the next panel, press Enter. That displays the panel that defines the
last optional schedule record.
3.2.4 Defining a Schedule Message Record
The last optional schedule record helps implement Unicenter CA-Scheduler's
message capability by notifying users of a schedule's progress. Unicenter
CA-Scheduler is prepared to notify users of four events concerning schedules:
■
■
■
■
When schedules start
When they end
When they are late
When they run too long
Chapter 3. Maintaining the Database 3-27