Unicenter CA-Scheduler Job Management for VSE User Guide
Unicenter CA-Scheduler Job Management for VSE User Guide Unicenter CA-Scheduler Job Management for VSE User Guide
atch command. Any command that is issued by executing a Unicenter CA-Scheduler program through standard DOS JCL. Unicenter CA-Driver. Computer Associates JCL manipulation product. Advantage CA-Earl. Computer Associates Easy Access Report Language. A subset of this product that allows you to customize reports is provided with Unicenter CA-Scheduler. CAISERV. A Computer Associates diagnostic facility that allows you to determine the current values of installation options and to produce reports for use in troubleshooting problems. calendar. An alternative method for identifying when a schedule or job should be selected as part of the day's workload. With this method, you define several calendars, each designating different days when schedules or jobs should be selected (Mondays, month-ends, pay days, and so forth). The database shows which calendar to consult when selecting a schedule or job. calendar mechanism. One of three date references Unicenter CA-Scheduler consults when selecting the day's workload. ■ The Gregorian calendar tells Unicenter CA-Scheduler what day of the week it is so, for example, jobs can be selected on Mondays. ■ Calendars explicitly define which days to select schedules and jobs so you can run jobs on random dates. ■ Datetables define workdays, holidays, accounting days and accounting periods so, for instance, Unicenter CA-Scheduler can select jobs on the last workday of the month. character string. One or more alphabetic, numeric, or special characters, usually enclosed in delimiters. control command. A command used to monitor or control the workload. Also known as operator command. criteria record. The record that determines when a schedule or job is to be selected for processing and lists the predecessors for the schedule or job. There is a schedule criteria record (SCR) and a job criteria record (JCR). criteria statement. A statement defining: ■ ■ The days schedules or jobs should be selected and What predecessor conditions must be satisfied before selected schedules can start or selected jobs can be submitted See selection criteria, predecessor criteria, and selection. criteria vocabulary. Reserved words used in Unicenter CA-Scheduler's criteria statements. cyclic scheduling. Scheduling a schedule or job at regular intervals regardless of which day or month it is (for example, every six weeks). database. The Unicenter CA-Scheduler master database that stores records containing definitions of userids, stations, schedules, jobs, and resources. The default name of the database is CAIJMST. datetable. Identifies workdays, holidays, accounting days, and accounting periods so you can use workday, holiday, and accounting keywords in criteria statements. datetable prefix. A one letter prefix (excluding E, H, N, P and W) that allows you to define multiple versions of a datetable by applying different prefixes. Date Translation Table. A report that shows when workday, accounting, and Gregorian conditions are true. deadlock. The stalemate that occurs when jobs are predecessors to each other. Deadlocked jobs never run because their predecessor conditions are never satisfied. Also called a predecessor loop. default. A value or action that Unicenter CA-Scheduler supplies automatically unless you specify some other alternative. delimiter. A special character that precedes and follows a character string. In 'this example', the delimiter is a single quote (') identifying a character string consisting of two words: this example. documentation. Members in the Unicenter CA-Scheduler documentation file (CAIJDCM) that provide information to users. X-2 Unicenter CA-Scheduler User Guide
documentation batch command. A command issued through batch using the CARUTIL0 program that is used to maintain members in the documentation file. documentation file. The Unicenter CA-Scheduler file that contains documentation members. The default name of the file is CAIJDCM. events. Occurrences that Unicenter CA-Scheduler monitors so it knows when predecessor conditions have been satisfied. Some of the events that Unicenter CA-Scheduler monitors are schedules and jobs starting and ending, the close of output data sets and generation data groups, and what time it is. explicit predecessor. A predecessor that is specifically defined in the criteria statement of a schedule or job. Explicit predecessors can be either of two types: ■ Selection-defined explicit predecessors are predecessors that also define selection criteria. They can be schedule or job names used with or without the keywords SCD and START. ■ Keyword-defined explicit predecessors are ignored in the selection process and always include one of the following keywords: DSN GDG GBLxnn DOS PRED When START or SCD are used with PRED or DOS, the result is a keyword-defined predecessor that is ignored during the selection process. forecasting. .* previously FORECAST Producing reports that show which schedules and jobs will be selected for processing on any given days. General authority level. The default authority level assumed for all users unless Supervisor or Manager is specified. Allow users to: ■ ■ ■ Define and maintain certain schedule and job records Control and display the status of certain schedules and jobs Potentially display and alter JCL for certain staged jobs Two fields determine the scope of a General user's authority: 1. The CONNECT field on each user record defines which stations that General user is authorized to access. 2. The USERS field on a schedule's base record defines which General users can access that schedule and its jobs. General users are prohibited from doing anything involving stations or schedules for which they are not authorized. See authorized users as well as Supervisor and Manager authority levels. generic list. A group of schedules or jobs whose names begin with the same characters. To display, list, or analyze a generic list, specify the common characters followed by an mask character (*). global parameter. A user-controlled variable that defines a predecessor condition in criteria statements and can assume arithmetic, binary, or character values. See keyword-defined explicit predecessors. Gregorian calendar. The standard 12-month calendar which Unicenter CA-Scheduler references to interpret certain selection keywords (like WEEK-DAY) in criteria statements. You can use Gregorian calendar keywords without defining a datetable or calendars. Gregorian date. A date shown as mm/dd/yy (American format) or dd/mm/yy (European format). history file. The Unicenter CA-Scheduler file that contains history records for schedules and jobs. history record. The record that contains statistics of past runs of schedules and jobs. implicit predecessor. Predecessors that are not defined on a job's criteria statement. Because Unicenter CA-Scheduler enforces workstation sequences, pre-CPU jobs (such as data entry and JCL staging) are implicit predecessors for CPU jobs. Likewise, CPU jobs are implicit predecessors for post-CPU jobs (such as report distribution). See sequence enforcement. inactive. Schedules and jobs that are: ■ ■ Defined as REQUESTED but not activated by a REQUEST or SREQ command, and The successors of REQUESTED schedules and jobs Schedules and jobs in the inactive queue at autoscan time are purged regardless of what values have been defined for BACKLOG. The opposite of active. Glossary X-3
- Page 253 and 254: 6.1 Commonly Asked Questions To all
- Page 255 and 256: 6.1 Commonly Asked Questions For de
- Page 257 and 258: 6.1 Commonly Asked Questions use of
- Page 259 and 260: 6.1 Commonly Asked Questions 6.1.4
- Page 261 and 262: 6.1 Commonly Asked Questions If the
- Page 263 and 264: 6.1 Commonly Asked Questions Status
- Page 265 and 266: 6.2 Pitfalls predecessor criteria o
- Page 267 and 268: Chapter 7. Techniques This chapter
- Page 269 and 270: 7.1 On-Request Schedules and Jobs 7
- Page 271 and 272: 7.1 On-Request Schedules and Jobs 7
- Page 273 and 274: 7.1 On-Request Schedules and Jobs W
- Page 275 and 276: 7.2 Backlogged Work completes on We
- Page 277 and 278: 7.3 Issuing Online Commands in Batc
- Page 279 and 280: 7.3 Issuing Online Commands in Batc
- Page 281 and 282: 7.3 Issuing Online Commands in Batc
- Page 283 and 284: 7.4 Restart/Recovery of Scheduled J
- Page 285 and 286: 7.5 Multiple CPU Considerations 7.5
- Page 287 and 288: 7.5 Multiple CPU Considerations Nor
- Page 289 and 290: 7.5 Multiple CPU Considerations exe
- Page 291 and 292: 7.5 Multiple CPU Considerations CAJ
- Page 293 and 294: 7.6 NJE Processing In the preceding
- Page 295 and 296: 7.6 NJE Processing 7.6.2.1 NJE Job
- Page 297 and 298: 7.6 NJE Processing 7.6.4 Installati
- Page 299 and 300: 7.6 NJE Processing Status BUSY Mean
- Page 301 and 302: 7.7 Summing Up Prefix PW DM Transac
- Page 303: Glossary This glossary defines term
- Page 307 and 308: Unicenter CA-Scheduler uses when or
- Page 309 and 310: The payroll department's month-end
- Page 311 and 312: Index Special Characters "Who is lo
- Page 313 and 314: Commands (continued) operator (cont
- Page 315 and 316: F FAIL CODE field 7-16 FAILED queue
- Page 317 and 318: MBR SUBID field 3-65 MCPU installat
- Page 319 and 320: Predecessors (continued) types (con
- Page 321 and 322: Scheduling (continued) jobs 1-5, 5-
- Page 323: User (continued) authority levels 2
atch command. Any command that is issued by<br />
executing a <strong>Unicenter</strong> <strong>CA</strong>-<strong>Scheduler</strong> program<br />
through standard DOS JCL.<br />
<strong>Unicenter</strong> <strong>CA</strong>-Driver. Computer Associates JCL<br />
manipulation product.<br />
Advantage <strong>CA</strong>-Earl. Computer Associates Easy<br />
Access Report Language. A subset of this product<br />
that allows you to customize reports is provided<br />
with <strong>Unicenter</strong> <strong>CA</strong>-<strong>Scheduler</strong>.<br />
<strong>CA</strong>ISERV. A Computer Associates diagnostic<br />
facility that allows you to determine the current<br />
values of installation options and to produce reports<br />
<strong>for</strong> use in troubleshooting problems.<br />
calendar. An alternative method <strong>for</strong> identifying<br />
when a schedule or job should be selected as part of<br />
the day's workload. With this method, you define<br />
several calendars, each designating different days<br />
when schedules or jobs should be selected<br />
(Mondays, month-ends, pay days, and so <strong>for</strong>th).<br />
The database shows which calendar to consult when<br />
selecting a schedule or job.<br />
calendar mechanism. One of three date references<br />
<strong>Unicenter</strong> <strong>CA</strong>-<strong>Scheduler</strong> consults when selecting the<br />
day's workload.<br />
■<br />
The Gregorian calendar tells <strong>Unicenter</strong><br />
<strong>CA</strong>-<strong>Scheduler</strong> what day of the week it is so, <strong>for</strong><br />
example, jobs can be selected on Mondays.<br />
■ Calendars explicitly define which days to select<br />
schedules and jobs so you can run jobs on<br />
random dates.<br />
■ Datetables define workdays, holidays,<br />
accounting days and accounting periods so, <strong>for</strong><br />
instance, <strong>Unicenter</strong> <strong>CA</strong>-<strong>Scheduler</strong> can select jobs<br />
on the last workday of the month.<br />
character string. One or more alphabetic, numeric,<br />
or special characters, usually enclosed in delimiters.<br />
control command. A command used to monitor or<br />
control the workload. Also known as operator<br />
command.<br />
criteria record. The record that determines when a<br />
schedule or job is to be selected <strong>for</strong> processing and<br />
lists the predecessors <strong>for</strong> the schedule or job. There is<br />
a schedule criteria record (SCR) and a job criteria<br />
record (JCR).<br />
criteria statement. A statement defining:<br />
■<br />
■<br />
The days schedules or jobs should be selected<br />
and<br />
What predecessor conditions must be satisfied<br />
be<strong>for</strong>e selected schedules can start or selected<br />
jobs can be submitted<br />
See selection criteria, predecessor criteria, and selection.<br />
criteria vocabulary. Reserved words used in<br />
<strong>Unicenter</strong> <strong>CA</strong>-<strong>Scheduler</strong>'s criteria statements.<br />
cyclic scheduling. Scheduling a schedule or job at<br />
regular intervals regardless of which day or month<br />
it is (<strong>for</strong> example, every six weeks).<br />
database. The <strong>Unicenter</strong> <strong>CA</strong>-<strong>Scheduler</strong> master<br />
database that stores records containing definitions of<br />
userids, stations, schedules, jobs, and resources. The<br />
default name of the database is <strong>CA</strong>IJMST.<br />
datetable. Identifies workdays, holidays,<br />
accounting days, and accounting periods so you can<br />
use workday, holiday, and accounting keywords in<br />
criteria statements.<br />
datetable prefix. A one letter prefix (excluding E,<br />
H, N, P and W) that allows you to define multiple<br />
versions of a datetable by applying different<br />
prefixes.<br />
Date Translation Table. A report that shows when<br />
workday, accounting, and Gregorian conditions are<br />
true.<br />
deadlock. The stalemate that occurs when jobs are<br />
predecessors to each other. Deadlocked jobs never<br />
run because their predecessor conditions are never<br />
satisfied. Also called a predecessor loop.<br />
default. A value or action that <strong>Unicenter</strong><br />
<strong>CA</strong>-<strong>Scheduler</strong> supplies automatically unless you<br />
specify some other alternative.<br />
delimiter. A special character that precedes and<br />
follows a character string. In 'this example', the<br />
delimiter is a single quote (') identifying a character<br />
string consisting of two words: this example.<br />
documentation. Members in the <strong>Unicenter</strong><br />
<strong>CA</strong>-<strong>Scheduler</strong> documentation file (<strong>CA</strong>IJDCM) that<br />
provide in<strong>for</strong>mation to users.<br />
X-2 <strong>Unicenter</strong> <strong>CA</strong>-<strong>Scheduler</strong> <strong>User</strong> <strong>Guide</strong>