CA Dynam for VSE User Guide

DYNCAT Commands
28W
28WE
2BWE
for tape cartridge (3592 data compaction unbuffered
write)
for tape cartridge (3592E data compaction unbuffered
write)
for tape cartridge (3592E encrypted data compaction
unbuffered write)
42 for 1600 BPI (9348 buffered write mode)
62 for 1600 BPI (9348 unbuffered write mode)
C2
E2
for 6250 BPI (9348 buffered write mode)
for 6250 BPI (9348 unbuffered write mode)
FIRSTvol=
LASTvol=
LENgth=
Specifies the first tape in a multi-tape initialization. The alpha-character
portion of the tape name must match that specified for the LAST volume. Both
must end in a numeric value.
Specifies the last tape in a multi-tape initialization. The alpha-character
portion of the tape name must match that specified for the FIRST volume.
Both must end in a numeric value. For example, FIRST=JVA001
LAST=JVA012.
Optional parameter. Specifies the length of this tape. Valid entries are:
XS
S
MS
M
ML
L
Extra short
Short
Medium short
Medium
Medium long
Long
NEW
Optional keyword parameter. Specifies that the tape to be initialized is a new
tape. Causes CA Dynam/T to immediately write a VOL1/HDR1 on the tape
without attempting to read the tape to determine if it contains valid data, since
to do so would result in an I/O error if the tape has never been initialized. Use
this parameter carefully.
8–72 User Guide