CA Dynam for VSE User Guide

DYNCAT Commands
CLean=
Optional parameter. Specifies the maximum number of tape errors to be
allowed for this volume before CA Dynam/T flags it to be cleaned. This is a
cumulative total that is retained in the Catalog until the tape is reinitialized.
Valid entries are:
a 1- to 3-digit number.
YES indicates that the tape has been cleaned, and resets the error counters in
the volume record.
Specify CLEAN=YES if the volume has been cleaned, but not reinitialized.
Comment
Optional parameter. Creates or alters a comment field associated with this
volser. Valid entries are:
A comment of 1-100 alphanumeric characters enclosed in apostrophes.
NO removes the comment.
DENsity=
Optional parameter. Specifies the recording density for this tape.
800 for 800 BPI
1600 for 1600 BPI
6250 for 6250 BPI
CART
for tape cartridge
00 for tape cartridge (buffered write mode)
00E
00M
00ME
00MH
00W
00WE
03WE
for tape cartridge (3490E buffered write mode)
for tape cartridge (3590 buffered write mode)
for tape cartridge (3590E buffered write mode)
for tape cartridge (3590H buffered write mode)
for tape cartridge (3592 buffered write mode)
for tape cartridge (3592E buffered write mode)
for tape cartridge (3592E encrypted buffered write mode)
08 for tape cartridge (data compaction with buffered write)
08E
for tape cartridge (3490E data compaction with buffered
write)
8–38 User Guide