CA Dynam for VSE User Guide

Data Set Maintenance
OPEN Input Destination
Indicate whether the message issued at OPEN input is to be sent to the
CONSOLE, the PRINTER or BOTH.
Alarm
Message
OPEN Output
Destination
Alarm
Message
Indicate whether the console above is to sound when this message is issued.
The message, up to 70 characters, to be issued at OPEN input.
Indicate whether the message issued at OPEN output is to be sent to the
CONSOLE, the PRINTER or BOTH.
Indicate whether the console above is to sound when this message is issued.
The message, up to 70 characters, to be issued at OPEN output.
CLOSE Input Destination
Indicate whether the message issued at CLOSE input is to be sent to the
CONSOLE, the PRINTER or BOTH.
Alarm
Message
CLOSE Output
Destination
Alarm
Message
KEKL1
L/H
KEKL2
L/H
Indicate whether the console above is to sound when this message is issued.
The message, up to 70 characters, to be issued at CLOSE input.
Indicate whether the message issued at CLOSE output is to be sent to the
CONSOLE, the PRINTER or BOTH.
Indicate whether the console above is to sound when this message is issued.
The message, up to 70 characters, to be issued at CLOSE output.
KEKL1 value, up to 64 characters.
Key Encryption Method for KEKL1:
L—Encode the Key label as the label is specified.
H—Encode the Key label as a hash of the public key.
KEKL2 value, up to 64 characters.
Key Encryption Method for KEKL2:
L—Encode the Key label as the label is specified.
H—Encode the Key label as a hash of the public key.
Local Commands
Type any of the following commands on the command line and press Enter to
execute these functions:
SWItch BACkward
Switch backward to the previous panel level.
7–28 User Guide