CA Dynam for VSE User Guide

Data Set Maintenance
Type
The type of the data set. Choose either DISK, TAPE or FI. If FI is specified, the
data set may be either a disk or tape that is available for dynamic device
switching.
• If you select DISK, you will be transferred to the Data Set Disk Option
Panel (CAYD-2120) when you switch forward to the next panel in the
series.
• If you select TAPE, you will be transferred to the Data Set Option Panel
(CAYD-2130) when you switch forward to the next panel in the series.
• If you select FI, you will be transferred to either of the two panels
mentioned above.
Disk Filetype
Ngens
Retention
Owner ID
Lock
Density
Displays the file type if disk is selected as the type of data set. SD, DA, or IS
(for ISAM) is displayed if disk was selected as the type of data set.
The number of disk data set generations to be saved. This may be a value
from 0 to 999
The retention period (number of days) from 0 to 9999, or NO to clear.
The 1 or 2 character ownership code for the data set, or NO to clear.
YES prevents access to this data set, NO allows access.
The recording density of this data set (TAPE only) or NO to clear. Valid entries
are:
800 for 800 BPI
1600 for 1600 BPI
6250 for 6250 BPI
CART
for tape cartridge
00 for tape cartridge with buffered write mode
00E
for tape cartridge with buffered write mode (3490E)
00M for tape cartridge with buffered write mode (3590)
00ME
00MH
for tape cartridge with buffered write mode (3590E)
for tape cartridge with buffered write mode (3590H)
00W for tape cartridge with buffered write mode (3592)
00WE
for tape cartridge with buffered write mode (3592E)
Chapter 7: Using Online Panels−CAICUI 7–17