CA Dynam for VSE User Guide

Data Set Maintenance
• Entering DYNAM DISplay DSNDETail from anywhere within the CUI
transaction
CAYD-2110 Data Set Detail CA Dynam
====>
Data Set: BGAWORK
Password:
Type: FI Disk Filetype:
Ngens: 0 Retention: 2 Owner ID: Lock: NO
Density: Exp Date: 00/00/0000 User ID: AMF: NO
Block Size: 0 PED Date: System ID: Catalog OPEN: NO
Record Length: 0 PED Cycle: 0 Volume ID: Work Data Set: NO
Record Format: No Access: 0 Def Vault: A DYNAM/FI: NO
Tape Length: Opens: 0 File No: 1 Robot: YES
Sysno Override: Next Disk: 1 Virtape: NO Long GDG: NO
Previous File:
Next File:
DASD Primary Allocations:
Volume: Alloc Unit: Logical Unit:
Primary: Secondary: Number of Sec:
Vault Locations(001-025):
1=Help 2= 3=Quit 4= 5=Switch Bwd 6=Switch Fwd
7=Backward 8=Forward 9= 10= 11= 12=Exit
You can use this panel to do the following:
• Update the displayed data set
• Display another data set (see the Data Set field description)
• Define a new data set (see the Data Set field description)
• Issue local commands
Additional attributes of this data set are displayed on the other panels in this
series. You can update all of the fields on this panel (except Opens, File No.
and Next File) by tabbing to the desired field and overtyping the information
contained there. When you press Enter, the changes are recorded by the
Catalog update facility.
Data Set
The name of the currently displayed data set, up to 44 characters.
You can use this field to select an existing data set for display, or to define a
new data set using the displayed data set as a model.
1. To select an existing data set for display, type its name in this field and
press Enter. The CA Dynam Catalog is browsed for the specified data set.
If found, it is displayed. If not found, a copy of the displayed data set is
created, using the specified name as the new data set name.
2. To define a new data set using the displayed data set as a model, type the
name of the data set to be created in this field and press Enter. A copy of
the currently displayed data set is created under the new name. You can
then modify its fields (except Opens, File No. and Next File) as desired.
Password
The 1- to 8-character password required to update the data set.
7–16 User Guide